Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical 4 NO KALAKATA P O MOWAMARI DIST COOCH BEHAR PIN 736134 | COOCH BEHAR | COOCH BEHAR | WEST BENGAL | 736134 | Accepted-Technical QUALIFIED |
| 2 | Accepted-Technical P O GHOKSADANGA DIST COOCH BEHAR | COOCH BEHAR | WEST BENGAL | Accepted-Technical QUALIFIED |
| 3 | Accepted-Technical | Accepted-Technical QUALIFIED |
Tender Value
₹44.8 L
EMD Value
₹89,567
Closing Date
27 Aug 2026, 2:00 pmClosed
SAMIT TALUKDER, EE, NBDD
NBDD Uttarkanya, Jalpaiguri
Infrastructure development including setup of new smart class room at Chakiar Chhara East No-II 5th Plan Primary School under Mathabhanga-II Block in the District of Cooch Behar. (Civil Part)
2026_NBDD_1037828_5
NBDD/BS/EE/ NIe-T- 23/2026-27
Open Tender
CIVIL WORKS
Percentage
240 days
Cooch Behar
Please refer Tender documents.
6 documents required · 6 mandatory
₹89,567
Yes
10 Oct 2026
13 Aug 2026
31 Aug 2026
13 Aug 2026
27 Aug 2026
13 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | 16.89 | Cu.M | 2,707.25 | ₹45,725.45 |
| 2 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand) | 49.34 | Sq.M | 1,249.83 | ₹61,666.61 |
| 3 | CEMENT PLASTER (IN COARSE SAND)
20 mm cement plaster of mix :
1:4 (1 cement: 4 coarse sand) | 358.56 | Sq.M | 542.06 | ₹1,94,361.03 |
| 4 | CEMENT PLASTER (IN COARSE SAND)
15 mm cement plaster on rough side of single or half brick wall of mix::
1:4 (1 cement: 4 coarse sand) | 418.73 | Sq.M | 457.93 | ₹1,91,749.03 |
| 5 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.
New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. | 1,164.6 | Sq.M | 201.58 | ₹2,34,760.07 |
| 6 | Finishing walls with Acrylic Smooth exterior paint of required shade
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | 558.3 | Sq.M | 178.61 | ₹99,717.96 |
| 7 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | 35 | Each | 254.52 | ₹8,908.2 |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 11.55 | Sq.M | 3,863.44 | ₹44,622.73 |
| 9 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
(Note: Butt hinges and necessary screws shall be paid separately)
Kiln seasoned and chemically treated hollock wood
30 mm thick shutters | 28.5 | Sq.M | 2,977.06 | ₹84,846.21 |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
Sal | 0.48 | Cu.M | 1,29,588.05 | ₹62,202.26 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.49 MB
Tendernotice_2.pdf
PDF • 0.51 MB
BOQ_2549507.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .