GEU(N) 11 2023 24 REPAIR TO INTERNAL WATER SUPPLY PLUMBING WORK JOINERIES AND SANITARY FITTINGS IN JNE EME ENCLAVE WSM MD ACCN AND TUSHAR VIHAR MD ACCN AND ADJOINING AREA UNDER AGE BR II OF GE(NORTH) UDHAMPUR

Amount

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding complete, removing serviceable tiles to store and rubbish serviceable tiles to store and rubbish off the premises, all as specified and directed

M&L for non skid coloured ceramic tiles area of each tile exc. .11 sqm but n.exc. 18 sqm 7mm to 8mm mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM(1:4) incl skirting all as specified & directed by Engr-in-Charge.

M&L for vitrified ceramic tiles any colour 7 to 8mm thick(Square or rectangular) polished Double charged, area of each tile exceeding 0.36 sqm (Size 600mmx600mm) bit n exe 0.42 sqm in floor etc,Set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed in CM 1:4 (10mm thick) incl skirting all as per specified & directed by Engr-In-Charge.

S&F glazed ceramic tiles (coloured) on vertical surfaces of of size 450x350x7/350x250x7mm thick set and jointed in neat cement slurry over 10mm thick rendering in CM 1:3 and pointed in coloured cement to match complete all as specified and as diredted.

M&L for machine cut kota stone slab flooring 18-20mm thick over 20 mm th cement screed in CM 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Ditto but on skirting including 10mm th in CM 1:3 completeall as specified & directed by Engr-in-Charge.

M & L for 18 to 20 mm thick,granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 20 mm th screed bed in CM 1:4 complete all as specified & directed by Engr-in-Charge.

M & L for rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), all as specified & directed by Engr-in-Charge.

M & L for taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement.

M&L for 10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth mixed with water proofing compound

M&L for 5 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and smooth mixed with water proofing compound

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete all as specified.including demolation of exsiting un-reinforcement concrete

M & L for taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified.

All as per item above but exceeding 1.5 Sqm and not exc 4 Sqm each.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer all as specified & directed by Engr-in-Charge.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, complete all as specified & directed by Engr-in-Charge.

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & directed by Engr-in-Charge.

All as per item above but glazed and skeleton shutter with sash bar for glass / wire gauge. all as specified & directed by Engr-in-Charge.

M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified & directed by Engr-in-Charge.

S&F aluminum anodised bolts barrels tower bolts with bright both 150mm long complete all as specified & directed by Engr-in-Charge.

S&F aluminium alloy ,anodised,sliding door bolt 300 mm length with hasp,staple (bolt type) and fixing clip of sheet,cast or etruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed as per specified.

S&F alunminium handle cost type 150mm long oval type complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surface complete all as specified & directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan `P` or `S` trap ( pedestal pattern ) white including fixing bolts,including connection P trap etc to drain pipe ( or out going pipe) and to flushing pipe,antisyphonage pipe etc complete.all as specified & directed by Engr-in-Charge.

S&F vitreous china squatting pan ‘Orissa’ pattern size 580X440mm , white with integral foot rest (Excluding flushing system and flush pipe) with ‘P’ or ‘S’ trap all as specified & directed by Engr-in-Charge. .

S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve,float and handleof low or high density and 15mm PVC connection 450mm long including taking down the existing complete.all as specified & directed by Engr-in-Charge.

Demolition of brick work or stone boulder masonery built in cement mortor including all quoins arches pillars etc complete all as specified & directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in cm 1.6 complete all as specified & directed by Engr-in-Charge.

M&L for half brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius but in cm 1:4 complete all as specified & directed by Engr-in-Charge.

S&F inrepair viterous china wash basin pedestral type white flat back size 550 x 400mm incl waste couping CP 32mm dia chain and plug and porcelain stopper and CI brackets of iron 65 x 65 xincl 6mm embedded in PCC block with PCC 1:2:4 type B-1 and Incl 450mm PVC waste pipe getting with holes complete all as specified and directed by Engr-in-Chare.

S&F pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed of iron pipe of bore 15mm complete all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed by Engr-in-Charge.

S&F in repairTowel rail 600mm long aluminium tower bolts 20mm D type complete all as specified & directed by Engr-in-Charge.

M&L for preperation of old decorated surfaces and applying two coats of distemper oil emulsion on walls over a coat of 1mm wall care putty including complete removal of existing treatment complete all as specified & directed by Engr-in-Charge.

M&L for preperation of new decorated surfaces and applying two coats of distemper oil emulsion on walls over a coat of 1mm wall care putty over a coat of primer including complete removal of existing treatment complete all as specified & directed by Engr-in-Charge.

M&L for three coat of white wash on new surface of ceiling all as specified.

M & L for two coat of cement base paint over newly plastered surfaces of wall including preparing surfaces complete

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm dia complete all as specified and directed by Engineer-in Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20mm dia complete all as specified and directed by Engineer-in Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 25mm dia complete all as specified and directed by Engineer-in Charge.

S&F steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore all as specified.

Refixing steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore all as specified.

S&F steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20 mm bore all as specified.

S&F steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 25mm bore all as specified.

S&Fin repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15mm dia complete all as specified and directed by Engineer-in Charge.

S&F in repair 15mm Bib taps, cast copper alloy, fency type chromium plated, with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in Charge.

S&F in PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified.

S&F in repair rotational moulded polyethlene water storage tanks white in colour three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 500 Ltr including dismantling & remove old tank from site all as specified & directed by Engr-in-Charge.

S&F in repair rotational moulded polyethlene water storage tanks white in colour three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 1000 Ltr including dismantling & remove old tank from site all as specified & directed by Engr-in-Charge.

S&F ball brass valves 20mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed

M&L for demolition of cement concrete of any description and in any position not otherwise specifically provided for cemen concrete complete all as specified and directed by Engineer-in Charge.

M&L for PCC 1:4:8 type D-2 as in floors 75mm thick complete all as directed & specified.

M&L 40 mm thick flooring in PCC 1:2:4 type B1 using 20mm graded stone aggregate surfaces finished even and smooth using extra cement (staircase incl steps).

M&L for machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified & directed by Engr-in-Charge.

M &L for 25mm thick Sand cusioning /filling under floors or complete all as specified & directed by Engr-in-Charge.

M&L for chequred cement concrete tile size 20cmx 20cm x 25mm thick machine pressed set & jointed in neat cement slurry as in floors joint fiil up with white grey cement & pigments all including 15mm thick screed bed with CM 1:4 all as specified & directed by Engr-In-Charge.

S&F aluminium extruded section hydraulically door closer regulated designation no-1 universal type suitable for door shutter upto 700mm in width & of weight not more than 35 kg all as specified & directed by Engr-In-Charge.

S&F in repair wash basins, vitreous China flat back, size 580 X 450mm (excluding CP pillar tap),including 32mm size waste coupling, 15mm size 450 mm long PVC connection, 32mm size PVC waste pipe & angle brackets 30x30x450mm complete all as specified & directed by Engr-in-Charge.

S&F towel Ring fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed by Engineer-in Charge.

S & F in repairs vitreous China bowl urinal flat back size of 465x355x265mm white (miniumum) with grating & union for discharge pipe (excluding flushing cistern,)including waste fittings complete all as specified & directed by Engr-in-Charge.

M&L for demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for cement concrete complete all as specified and directed by Engineer-in Charge.

M & L for RCC M-25 design mix type B1 1:2:4 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in Charge.

M & L for RCC M-25 design mix Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm th plastering with water proofing compound as directed laid/made to slope as in RCC roof surfaces complete all as specified & directed by Engr-in-Charge.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed by Engineer-in Charge.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed by Engineer-in Charge.

M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in Charge.

M&L for mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in Charge.

S&F for galvanised mild steel wire cloth 0.63mm nominal dia of wire & average width of aperture 1.40mm complete all as specified and directed by Engineer-in Charge.

Supply and fixing factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings & directed by Engr-in-Charge.

Supply and fixing factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings, complete all as specified & directed by Engr-in-Charge.

S&F for providing and fixing 30mm thick factory made PVC door shutter consisting of panel of hollow PVC Profile of 24mm thickness, consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing,complete all as specified & directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings, complete all as specified & directed by Engr-in-Charge.

M&L for 18/19mm thick prelaminated particle board medium density flat pressed single layer type or three layer type with BWR type adhesive.complete all as specified & directed by Engr-in-Charge.

S&F for hasp and staple, 100 mm, mild steel, safety type, stove enalmelled black , including bolt to hinge plate and fixed with screws, all as specified .

S & F continuous ( Piano ) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm complete all as specified and directed by Engineer-in Charge.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.Including taking down existing shutters

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing,anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified & directed by Engr-in-Charge. Including taking Down Exiting Shutters

S&F powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified & directed by Engr-in-Charge including taking down existing frame.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed by Engr-in-Charge.

M&L for dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets,all as specified.

S&F non asbestos fibre cement board ceiling 4mm, thick in 605x605mm panel (Make-everest) designed ceiling conforming to IS-14862 type B category three incl snapgrid frame work, hold fast, suspenders fixed in repair complete all as specified & directed by Engr-in-Charge.

M&L for 4mm thick non AC board fixed with screw complete all as specified & directed by Engr-in-Charge.

M&L for hacking out old broken glass any thickness, size quality from wooden frame or steel frame glazed with putty or fixed with beads.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified & directed by Engr-in-Charge.

S&F4 mm thick figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge.

Dismantling of CGI/AC/ any others sheet of any description incl ridges etc all as specified & directed by Engr-In-Charge.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.

Supply and fixing PVC (SWR). Pipe 110mm dia in any length with rubber ring joints, fixed to walls any height including taking down all as per specified and directed.

Supply and fixing PVC (SWR). Pipe 75 mm dia in any length with rubber ring joints, fixed to walls any height including taking down all as directed.

Dismantling of boarding any description fixed in any position with nails as per specified by Engr-in-charge.

S&F Solid PVC wall lining ( Wall Panelling) consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement & fixing at site on PVC frame as per specification & directed by Engr-In-Charge

M&L for demolition of cement concrete, un reainforced in sunken portion of WC, removing all loose particale alogwith exiting Water proofing treatment, cleaning, cleaning by wire mess/ brushes to removing all dirt and cleaning the surface with water etc.

M&L for providing and laying water proofing treatment to sunken portion of WCs, bathrooms, etc by applying first layer of slurry of cement @ 0.488kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253kg/sqm this layer allowed to air cure for 4 hrs then applying slurry of cement @ 0.242 kg/sqm mixed with acrylic based polymer modified cementitious composite compound @0.126kg/sqm and allowed to aircure for 4 hrs and joints seal with sealing compound as approved by GE. Note: (i) Before laying of lean concrete joints of trap/WC/Soil pipes shall be properly sealed with sealing compound of Roofex/Forre/FOSROC and provn of P or S trap & Nahani /Floor traps with long arm.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortot as in CM 1:3 finishing even & smooth w/o using extra cement, complete all as specified and as directed.

M&L for lean concrete using 40mm graded stone aggregate as in 1:5:10 as in sunken portion treatment, complete all as specified and as directed.

S&F for health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed. Make - Jaquar cat part No- ALD-573, Cera- F 8030103

S&F for jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed complete all as specified and as directed. ( fixed as in Repair)

S&F for soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, fixed in repair complete all as specified and directed. ( fixed as in Repair)

S/F 32 mm Bore of trap Brass chromium plated bottle traps for wash basins with inlet and outletscrewed for pipe or connections including necessary packing, union and cap. ( fixed as in Repair)

Shower rose, brass, chromium plated, 125mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed.( fixed as in Repair)

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed.

Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed.( fixed as in Repair)

Sink wall mixer, brass, chromium plated, fancy type, with capstan head handles screwed down high pressure, with lettered 'hot' and 'cold', including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed.( fixed as in Repair)

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including waste coupling and waste pipe & bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm bowl size 410mmx330mmx160mm, fixed in repair complete all as specified and as directed( fixed as in Repair)

S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed, complete all as specified and as directed.

S&F in repair 18 mm thick prelaminated medium density fibre (MDF) boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screwsas in cup board, shelves, kitchen cabinet, etc, complete all as specified and directed.

S&F in repairs ply wood grade BWR type BB, 12 mm thick fixed to timber frame work with nails etc, complete all as specified and directed.

S&F in repairs Drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electro galvanised, width of flap 30mm fixed in repair, complete all as specified for modular kitchen, complete all as specified and directed.

S&F in repairs Stainless steel multipurpose bracket in wooden drawer/partitions for storing rations of various types made of 4mm dia stainless steel rods, fixed in side partitions etc fixed , complete all as specified for modular kitchen. Make : Usha shriram entp pvt ltd or equivalent, complete all as specified and directed.

S&F in repair Stainless steel ladle cradle as per sample hanging stand for cutlery all as specified and directed by Engineer-in -charge for modular kitchen, complete all as specified and directed. Make : Usha shriram entp pvt ltd or equivalent.

S&F in repair Stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen. Complete all as directed by Engr-in-charge. Make : AVIS Gold or equivalent.

Framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into skipes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works including welding con-forming to Fe 290 Gde-E-165

S&F in repairs MS helical door spring 300mm size including roller and roller plate fixed to wooden or welded to steel frames with welding/ fitted with screws etc, complete all as specified and directed as in repair

S&F 5mm frosted/ tinted sheet glass, ordinary quality and glazing with rubber neoprane packing for aluminium doors/ windows in square/ rectangular ex 0.5sq.m in each pane, complete all as specified and directed

S&F 35mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete all as specified and directed

S&F repair stack clamps made out of 50mm x 5mm flat iron & 15mm dia round iron steys, including bolts and nuts and securing ends of syays to wall or roof for 110mm bore, complete all as specified and directed in repair

S&F in repairs 75mm bore bends with access door (any radius) measured larger bore all as specified.

S&F in repairs 100mm bore bends/ reducer (any radius) dimnishing pieces or tapers (larger bore measured) all as specified.

M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floors basew of tiles complete all as specified and directed

M&L for GI pipe 40mm dia as in spout for sunken portion, complete all as specified and directed

M&L cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, cutting exc 10cm and not exc 20cm girth complete all as specified and directed

S&F hand shower 90mm round shape (telephonic shower), chromium plated, with 1500mm long 15mm bore chrome finish flexible pipe with hook, fixed in repair complete all as specified and directed

S&F single lever wall mixer 3 in 1, with provn of over head shower & hand shower, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, with provision for both hand shower and over hear shower, fixed in repair, complete all as specified and directed

S&F tumbler holder, brass, chromium plated, heavy duty, having suitable recesses made for hanging necessary bath items complete fixed with brass screws as per manufacturer's instructions. Fixed in repair

M&L preparation of new or previously untreated steel and iron surface of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed

DURGA CONSTRUCTION CO

KUMAR CONSTRUCTION CO

RUDRABHISHEK CONSTRUCTIONS

paras ram pachiala