GRAM AALDI MAI BARAT GHAR NIRMAN KARYA

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. SI 2.8.1

1:5:10 (1 cement: 5 fine sand derived from natural ources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) As per S.I. No. 4.1.11 Page 104, V-1

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in As per S.I. No. 6.2.2 Page 127, V-1

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:2:4 (1 cement 2 coarse sand (zore-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources As per S.I. No. 5.1.3 Page 113, V-1

12 MM THICK PLASTER IN 1:4 CEMENT AND C/SAND MOTAR IN PLINTH As per S.I. No. 13.1.1 Page 217, V-II

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. (Royality removed by Govt. ) for small works/ Abadi area. (where machine can not move ) (S.I. 1.1.2 PG 83

Brick work with common burnt clay F.P.S. (nori modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: As per S.I. No. 6.4.2 Page 127, V-I

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). SI 5.3

12 MM cement plaster finished with a floating coat of neat cement of mix 1:3 with cement and c.sand mix comp. as per SI 13.9.1

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece SI 10.5.2

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in As per S.I. No. 6.2.1 Page 127, V-1

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Mild steel and Medium Tensile steel bars. SI 5.22A PG 118

12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) Comp. as SI 13.1.1 PG 217

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc Size of Tile 600x600 mm., complete. SI 11.41.2 PAGE 194

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. SI 11.37 PG 193

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate SI 11.3 PG 189

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.40 mm wide and 4 mm thicK SI 11.13

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. SI 17.1.1

P/FIXING 110MM DIA P.V.C PIPE (S.I. NO. 30-A)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. SI 13.80

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer SI 13.41.1

Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm) SI 13.44.1

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution SI 13.53.1

S/FIXING OF SIGN BOARD at site i/c comp. all respect

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks:1:6 (1cement : 6 coarse sand) SI 11.1.2

S/FIXING FAN BOX AT SITE I/c comp. all respect

WIRING POINT FOR LIGHT AS PER I/c comp. all respect (S.I. NO. 131-C)

WIRING POINT FOR FAN I/c comp. all respect (S.I. NO. 133-C)

WIRING POINT FOR PLUG I/c comp. all respect (S.I. NO. 134-C)

S/FIXING 6 AMP TO 32 AMP MCB AS PER I/c comp. all respect (S.I. NO.1002)

DEDUCT 4% VAT

Less 5% for Competitive price efficeincy

Please Enable Macros to View BoQ information