COMPREHENSIVE B/R AND E/M REPAIRS TO CENTRAL INSTITUTES AND OTM BLDG IN ZONE B AND REPAIRS TO SANITARY FITTINGS, TILING, PLASTERING, JOINERY, PATH, CHAJJAS, LEAKAGE, PERIODICAL SERVICES AND MISC B/R AND E/M WKS AT MH, DENTAL WARD AT NDA KHADAKWASLA

M&L for PCC 1:2:4 type B0 using 12.5 mm graded agg as in PCC padding in roof kerbs or mud stops, rounded and chamfered on edges and on chajjas laid over RCC surface finished even and smooth without using extra cement including necessary water proofing chemicals complete all as specified and as directed. (Note: WPC shall be measured and paid separately)

M&L for precast cement concrete block masonry with solid blocks 1:3:6 type C-1 (using 20 mm graded stone aggregate), of size 300mm x 100mm x 200mm and setting in cement mortar 1:4, complete all as specified and directed.

Supply only integral water proofing compound complete all as specified.

Supply only Liquid water proofing compound complete all as specified.

M&L for Non-Shrink-Polymeric waterproof grouting compound mixed with neat cement slurry (mixing of ratio as per manufacturers instruction) be injected through the nozzles under pressure not exc 2Kg/Sqm to ensure that the grouts runs through all pores and cracks in the concrete there by sealing them after injections is over the nozzles be sealed off the CICO Supaplast and applying two coats of a polymer modified cementitious slurry upto 300mm from vertical and horizontal edges of crack (such as Tape-Crete or equivalent) be applied over the surface of walls/floors.Cracks to be cleaned and removing loose old concrete surfaces filled with filler material before epoxy grouting etc all as per manufacturers instruction and specification complete all as specified and directed. Note :- (i) Work to be executed in patches at deteriorated portion, The rate quoted inclusive of work in patch manner). (ii) The cost of Scaffolding and necessary precautions equipment for height of bldg. upto 30.00 mtr required are deemed to be included in the rates quoted by the contractor.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed .

M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L 16-18 mm thick granite (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, counter basins and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed. (Note:- Granite to be used in treads shall be one piece with nosing at front and cutting two grooves along with nosing. Exposed edges to be made half round. Colour shall be of Lakha red, flamed granite or telephonic black as approved.)

M& L for second class hard wood in exc 40 Sq cm in area or over in section in clean sawn unframed work complete all as specified and directed.

Fixing only second class hard wood in exc 40 Sq cm in area or over in section in clean sawn unframed work complete all as specified and directed.