Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹65,000
Closing Date
26 Feb 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Housing Board
SHIVASHANKARAPPA K H
Repair works to Assistant Executive Engineer, DPO, KHB at Sy No. 57/1, Bondel, Mangaluru Taluk in Dakshina Kannada District
KHB/2023-24/OW/WORK_INDENT167
KHB/2023-24/OW/WORK_INDENT167
Open
Other Works
Electronic Documents, First(One Cover)
KHB Central Office Bengaluru
10 documents required · 7 mandatory · 3 optional
₹810
₹65,000
18 Feb 2024
18 Feb 2024
21 Feb 2024
22 Feb 2024
Repair works to Assistant Executive Engineer, DPO, KHB at Sy No. 57/1, Bondel, Mangaluru Taluk in Dakshina Kannada District
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee...
Earth work excavation by manual means for drains, canals, waste weir, draft,
approach channels, key trenches, foundation of Buildings & bridges and such
simillar works in all kinds of soils, as per ...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Cod...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Cod...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/t...
Providing and constructing laterite size stone masonry including cost
and conveyance of all materials curing etc complete as per specification
I.S. 3620/1979 having compressive strength not less tha...
Providing and constructing laterite size stone masonry including cost
and conveyance of all materials curing etc complete as per specification
I.S. 3620/1979 having compressive strength not less tha...
Providing and fixing Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,
fixing in position and applying a priming coat of appr...
Providing and fixing Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,
fixing in position and applying a priming coat of appr...
Providing and fixing precoated galvanised iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+
0.05 %) total coated thickness with zinc coating 120...
Providing and fixing precoated galvanised iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+
0.05 %) total coated thickness with zinc coating 120...
Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per
IS: 277, in 240 mpa steel grade, 5-7 microns epoxy p...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns
Providing and fixing Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer using structural steel ...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10
to 20mm thick in cement mortar 1:3 including cutting the patches in
proper shape and replastering the surface of the wall includi...
Dubbing out on old irregular walls average 10mm thick and making good the surface with cement mortar 1:4 including curing cost of materials, labour, complete as per specifications. Sl No.20.86, P...
Dubbing out on old irregular walls average 10mm thick and making good the surface with cement mortar 1:6 including curing cost of materials, labour, complete as per specifications.
Sl No.20.87, Pg No....
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :One coats on old
work as per specifications and as per directions of Engineer in char...
Applying priming coat: With ready mixed red oxide zinc chromate
primer of approved brand and manufacture on steel galvanised iron/
steel works including preparing the surface after thorougly cleanin...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5 mm (heavy type) ...
Polishing on wood work with readymade wax polish of approved brand and manufacture : Old work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and for...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate sections and other sections of approved make conformi...
Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with EPDM rubber / neoprene gasket
etc. complete as per the architectural drawings and the directions ...
Providing and fixing in position collapsible steel shutters with vertical
channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,
with top and bottom rail of T-iron 40x40x6 mm, with 40...
Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal e...
Constructing brick masonry chamber of internal dimension 600x600mm
and depth of 600mm (inner dimensions) with modular bricks of CD 75
in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plast...
Providing and fixing SFRC frame and cover conforming to IS 12592
(part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment,
including cutting slabs to the required size for the opening and fi...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013
with latest amendments ended with integral sockets with ISI mark and
conveying to worksite, rolling and lowering into trenches, laying t...
Supplying, installing and testing 15 mm CP health faucet of approved make with necessary CP flexible hose 750 mm long nozzle, CP wall flange etc., including cost of materials,labour complte as per spe...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Sl.No. 3.6 Pg.No. 9 (PWD Electrical items S.R. 2023-2024)
6 Amps one way s...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Sl.No. 3.6 Pg.No. 9 (PWD Electrical items S.R. 2023-2024)
16A One Way Swit...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Sl.No. 3.6 Pg.No. 9 (PWD Electrical items S.R. 2023-2024)
6 Amps two way s...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Sl.No. 3.6 Pg.No. 9 (PWD Electrical items S.R. 2023-2024)
6A Three Way soc...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Sl.No. 3.6 Pg.No. 9 (PWD Electrical items S.R. 2023-2024)
Stepped Fan Regu...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Sl.No. 3.6 Pg.No. 9 (PWD Electrical items S.R. 2023-2024)
6 Amps Bell push
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying wall mounting fan suitable to operate at singlephase 230v AC. supply. Sl.No. 6.5.2 Pg.No.30 ((PWD Electrical S.R. 2023-2024) 400mm Sweep
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Po...
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has ...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...
Wiring for lighting/power circuit using one of FRLS PVC insulated
1100V grade, multistrand copper wire with low conductor resistance
single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated
1100V grade, multistrand copper wire with low conductor resistance
single core in open or concealed system of wiring with specified IS...
Supplying, erecting, testing and commissioning of voltage stabilizer
suitable for 170 to 270 v input and load variation from no load to full
load, with over load protection, spike suppression, operati...
SSupplying, installation, testing & commissioning of 12V DC, AH
batteries in poly propylene container for U.P.S. Sealed maintenance
free batteries. 150 AH capacity ...
Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wir...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic
(FRP) panelled door shutter of required colour and approved brand and
manufacture, made with fire - retardant grade unsatu...
Providing & fixing 6mm thick High Density PVC box type letters in Kannad wih MRF Vapour cure paint & font size 3mm laser cutting Acrylic letters with front glow Samsung(water proof) LED modules fixe o...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
OFC TRUSS.jpg
Design Document • 0.24 MB
KW-2 Repair Works Mangaluru.doc
Tender Document • 1.60 MB
MANGALORE OFFICE BUILDIGN FLOOR PLAN.pdf
Design Document • 0.74 MB
NIT Repair Works to AEE Project Office Mangaluru.docx
Others - NIT • 1.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .