Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.7 LAccepted-Finance 702 A1 SHREE PRASAD TAWADEWADI SHREE DATTAGURU PARK KUMBHARWADA URAN DIST RAIGAD MAHARASHTRA 400 702 | URAN | RAIGAD | MAHARASHTRA | 400702 | ₹42.7 L | L1 | Accepted-Finance BEING LOWEST |
| 2 | L2₹48.7 LRejected-Finance | ₹48.7 L | L2 | Rejected-Finance NOT BEING LOWEST |
| 3 | L3₹48.8 LRejected-Finance 1 A BASEMENT 30 31 RAJA HOUSE NEHRU PALACE NEW DELHI 110 019 | SOUTH EAST | DELHI | 110019 | ₹48.8 L | L3 | Rejected-Finance NOT BEING LOWEST |
| 4 | L4₹52.0 LRejected-Finance | ₹52.0 L | L4 | Rejected-Finance NOT BEING LOWEST |
| 5 | L5₹57.3 LRejected-Finance S NO 259 LOHOGAON ROAD KALWAD PUNE 411032 | PUNE | MAHARASHTRA | 411032 | ₹57.3 L | L5 | Rejected-Finance NOT BEING LOWEST |
| Sl No | Description | Qty | Unit | somnath engineering corporation L6 | Sagar Electricals L1 | MONA GENERATOR SEVICES PVT. LTD. L3 | Star Electrical L4 | Sunhari Electricals L2 | Rama Electricals L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down old LT panel and Supply install, test and commissioning of Powder coated LT panel cubical Indoor type floor standing type compartmentalized in construction fabricated from CPRI approved manufacturer specified in particular specification and made out of 2 mm thick CRCA sheet & suitable size to accomodate all accessories / fittings, to accommodate incoming MCCB/ACB and TPN Copper bus bars , incomer and outgoing feeders . The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The cubicle shall have floor standing bottom frame & of height 600mm & shall be made out of equal angle iron of size 50mm x 50mm x 6mm. A detachable predrilled gland plate of thickness not less than 2 mm thick powder coated should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front & back openable lockable /openable by key from both side. Copper extension link shall be provided at incomer & outgoing end of MCCB of rating 63 Amps & above. The panel shall be powder coated with 7 tank process of approved thickness complete including CTs, control wiring by 1.5Sqmm Wire, including taking down of old unsv panel after disconnecting Existing cable, taking out cable loop including excavation if required, and reconnecting cables to new panel including providing cable glands, lugs, nut bolts for all cables ets incl provision of heat shrinkable sleeve on each core of LT cable within panel and grouting bolts, the panel shall comprise of following and including demolition of existing PCC foundation and making good as per existing, complete all as specified & directed by Engineer in Charge. | 1 | Each | 5,19,500 ₹5.2 L | 3,60,000 ₹3.6 L | 4,61,351 ₹4.6 L | 5,00,000 ₹5 L | 5,04,450 ₹5.0 L | 5,48,700 ₹5.5 L |
| 1.01 | a) Copper bus bar 1200 Amps for 4 pole
b) ACB FP 800 Amps 415 Volt 50 KA, Ics =100% Icu microprocessor release Manual draw out type - 1 Nos
c) MCCB TP 100 Amps - 415 Volt 16 KA, Ics =100% Icu - 2 Nos
d) MCCB TP 400 Amps 415 Volt 36 KA, Ics =100% Icu - 1 Nos e) MCCB TP 200 Amps 415 Volt 25 KA, Ics =100% Icu - 4 Nos
f) RYB Indicators - 1 Set and g)Digital 3 Phase Amp Meter and Voltmeter with selector switch - 1 Set h)ML-2 Contactor-1 No i)Digital street light timer-01 Nos j) Auto Manual Selector switch- 01 Nos k) TPN 40 Amp connector-02 Nos l)MCB TPN 40 Amps- 1Nos | - | - | - | - | - | - | - | - |
| 2.00 | All as per item no 01 but with the following acessories
a) Copper bus bar 600 Amps for 4 Pole
b) MCCB FP 320 Amps 415 Volt 35 KA, Ics =100% Icu - 1 Nos
c) MCCB TP 200 Amps 415 Volt 25 KA, Ics =100% Icu - 1 Nos
d) MCCB TP 100 Amps 415 Volt 16 KA, Ics =100% Icu - 3 Nos
e) Change over switch 400 A , 4 pole - 1 Nos
f) RYB Indicators - 1 Set and g)Digital 3 Phase Amp Meter and Voltmeter with selector switch - 1 Set | 1 | Each | 2,52,875 ₹2.5 L | 1,86,000 ₹1.9 L | 1,97,152 ₹2.0 L | 2,07,000 ₹2.1 L | 2,11,000 ₹2.1 L | 2,47,800 ₹2.5 L |
| 3.00 | All as per item no 01 but with the following acessories
a) Copper bus bar 500 Amps for 4 Pole
b) MCCB FP 250 Amps 415 Volt 25 KA, Ics =100% Icu - 1 Nos
c) MCCB TP 160 Amps 415 Volt 25 KA, Ics =100% Icu - 1 Nos
d) MCCB TP 63 Amps 415 Volt 16 KA, Ics =100% Icu - 2 Nos
f) RYB Indicators - 1 Set and
g)Digital 3 Phase Amp Meter and Voltmeter with selector switch - 1 Set | 1 | Each | 1,69,250 ₹1.7 L | 90,000 ₹90,000 | 1,08,200 ₹1.1 L | 95,000 ₹95,000 | 1,12,000 ₹1.1 L | 1,40,125 ₹1.4 L |
| 4.00 | Taking down old LT panel and Supply install, test and commissioning of Powder coated LT panel cubical Outdoor type double door, free standing type compartmentalized in construction fabricated from CPRI approved manufacturer specified in particular specification and made out of 3 mm thick CRCA sheet & suitable size to accomodate all accessories / fittings, to accommodate incoming MCCB/ACB and TPN Copper bus bars , incomer ACB/MCCB and outgoing feeders with MCCB/MCB. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The cubicle shall have free standing bottom frame/stand of height 600mm & dimension as required for panel & shall be made out of equal angle iron of size 50mm x 50mm x 6mm. A detachable predrilled gland plate of thickness not less than 3 mm thick powder coated should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front & back openable lockable /openable by key from both side. Copper extension link shall be provided at incomer & outgoing end of MCCB of rating 63 Amps & above. The panel shall be powder coated with 7 Tank Process of approved thickness complete including CTs, control wiring by 1.5Sqmm Wire, including taking down of old unsv panel after disconnecting Existing cable & Reconnecting the cables to new panels including providing cable glands, lugs, nut bolts etc including proivision of heat shrinkable sleeve on each core of LT cable with panel grouting bolts, the panel shall comprise of following and including demolition of existing PCC foundation and making good as per existing, complete all as specified & directed by Engineer in Charge. | 1 | Each | 1,69,250 ₹1.7 L | 1,10,400 ₹1.1 L | 1,12,183 ₹1.1 L | 1,08,000 ₹1.1 L | 1,16,500 ₹1.2 L | 1,47,500 ₹1.5 L |
| 4.10 | with the following acessories
a) Copper bus bar 400 Amps for 4 Pole
b) MCCB FP 250 Amps 415 Volt 25 KA, Ics =100% Icu - 1 Nos
c) MCCB TP 100 Amps 415 Volt 16 KA, Ics =100% Icu - 3 Nos.
d) MCCB TP 63 Amps 415 Volt 16 KA, Ics =100% Icu - 1 Nos
f) RYB Indicators - 1 Set and
g)Digital 3 Phase Amp Meter and Voltmeter with selector switch - 1 Set | - | - | - | - | - | - | - | - |
| 5.00 | All as per item no 04 but with the following acessories
a) Copper bus bar 500 Amps for 4 Pole
b) MCCB FP 320 Amps 415 Volt 35 KA, Ics =100% Icu - 1 Nos
c) MCCB TP 100 Amps 415 Volt 16 KA, Ics =100% Icu - 5 Nos.
f) RYB Indicators - 1 Set and
g)Digital 3 Phase Amp Meter and Voltmeter with selector switch - 1 Set | 1 | Each | 1,91,375 ₹1.9 L | 1,25,000 ₹1.3 L | 1,28,115 ₹1.3 L | 1,33,000 ₹1.3 L | 1,34,000 ₹1.3 L | 1,44,550 ₹1.4 L |
| 6.00 | All as per item no 04 but with the following acessories
a) Copper bus bar 1200 Amps for 4 pole
b) ACB FP 800 Amps 415 Volt 50 KA, Ics =100% Icu microprocessor release Manual draw out type - 1 Nos
c) MCCB TP 100 Amps - 415 Volt 16 KA, Ics =100% Icu - 5 Nos
d) MCCB TP 400 Amps 415 Volt 36 KA, Ics =100% Icu - 2 Nos e) MCCB TP 200 Amps 415 Volt 25 KA, Ics =100% Icu - 1 Nos f) RYB Indicators - 1 Set and
g)Digital 3 Phase Amp Meter and Voltmeter with selector switch - 1 Set | 1 | Each | 5,62,625 ₹5.6 L | 3,60,000 ₹3.6 L | 4,36,126 ₹4.4 L | 4,75,000 ₹4.8 L | 4,76,500 ₹4.8 L | 5,50,175 ₹5.5 L |
| 7.00 | All as per item no 04 but with the following acessories
a) Copper bus bar 500 Amps for 4 Pole
b) MCCB FP 250 Amps 415 Volt 25 KA, Ics =100% Icu - 1 Nos
c) MCCB TP 100 Amps 415 Volt 16 KA, Ics =100% Icu - 5 Nos.
f) RYB Indicators - 1 Set and g)Digital 3 Phase Amp Meter and Voltmeter with selector switch - 1 Set | 3 | Each | 1,79,500 ₹5.4 L | 1,00,000 ₹3 L | 1,09,528 ₹3.3 L | 1,12,500 ₹3.4 L | 1,13,500 ₹3.4 L | 1,43,075 ₹4.3 L |
| 8.00 | All as per item no 04 but with the following acessories
a) Copper bus bar 600 Amps for 4 Pole
b) MCCB FP 400 Amps 415 Volt 36 KA, Ics =100% Icu - 1 Nos
c) MCCB TP 100 Amps 415 Volt 16 KA, Ics =100% Icu - 9 Nos.
f) RYB Indicators - 1 Set and g)Digital 3 Phase Amp Meter and Voltmeter with selector switch - 1 Set | 1 | Each | 2,43,000 ₹2.4 L | 1,85,000 ₹1.9 L | 1,90,514 ₹1.9 L | 2,02,000 ₹2.0 L | 2,03,500 ₹2.0 L | 2,62,550 ₹2.6 L |
Updated dates
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
16 Dec 2025, 6:00 pmClosed
Garrison Engineer
GE AF LOHEGAON PUNE-411032
SPECIAL REPAIRS TO LT PANEL AT VARIOUS LOCATION AT AF STN PUNE UNDER GE (AF) LOHEGOAN
2025_MES_740662_1
8000
Open Tender
Electrical and Maintenance Works
180 days
AFS PUNE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE AF LOHEGAON
₹87,000
Yes
2 Jan 2026
20 Nov 2025
22 Dec 2025
20 Nov 2025
16 Dec 2025
4 Dec 2025
Amount
Taking down old LT panel and Supply install, test and commissioning of Powder coated LT panel cubical Indoor type floor standing type compartmentalized in construction fabricated from CPRI approved manufacturer specified in particular specification and made out of 2 mm thick CRCA sheet & suitable size to accomodate all accessories / fittings, to accommodate incoming MCCB/ACB and TPN Copper bus bars , incomer and outgoing feeders . The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The cubicle shall have floor standing bottom frame & of height 600mm & shall be made out of equal angle iron of size 50mm x 50mm x 6mm. A detachable predrilled gland plate of thickness not less than 2 mm thick powder coated should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front & back openable lockable /openable by key from both side. Copper extension link shall be provided at incomer & outgoing end of MCCB of rating 63 Amps & above. The panel shall be powder coated with 7 tank process of approved thickness complete including CTs, control wiring by 1.5Sqmm Wire, including taking down of old unsv panel after disconnecting Existing cable, taking out cable loop including excavation if required, and reconnecting cables to new panel including providing cable glands, lugs, nut bolts for all cables ets incl provision of heat shrinkable sleeve on each core of LT cable within panel and grouting bolts, the panel shall comprise of following and including demolition of existing PCC foundation and making good as per existing, complete all as specified & directed by Engineer in Charge.
Taking down old LT panel and Supply install, test and commissioning of Powder coated LT panel cubical Outdoor type double door, free standing type compartmentalized in construction fabricated from CPRI approved manufacturer specified in particular specification and made out of 3 mm thick CRCA sheet & suitable size to accomodate all accessories / fittings, to accommodate incoming MCCB/ACB and TPN Copper bus bars , incomer ACB/MCCB and outgoing feeders with MCCB/MCB. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The cubicle shall have free standing bottom frame/stand of height 600mm & dimension as required for panel & shall be made out of equal angle iron of size 50mm x 50mm x 6mm. A detachable predrilled gland plate of thickness not less than 3 mm thick powder coated should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front & back openable lockable /openable by key from both side. Copper extension link shall be provided at incomer & outgoing end of MCCB of rating 63 Amps & above. The panel shall be powder coated with 7 Tank Process of approved thickness complete including CTs, control wiring by 1.5Sqmm Wire, including taking down of old unsv panel after disconnecting Existing cable & Reconnecting the cables to new panels including providing cable glands, lugs, nut bolts etc including proivision of heat shrinkable sleeve on each core of LT cable with panel grouting bolts, the panel shall comprise of following and including demolition of existing PCC foundation and making good as per existing, complete all as specified & directed by Engineer in Charge.
S&F GI strip size 32 x 6 mm all as directed including welding brazing and taking down of old copper strips as required at site
Excavation in trenches not exceeding 1.5 m wide but not exceeding 1.5m in depth for erection of poles/ laying of cable in any type of soil all as specified and directed by EIC at site
Soft/loose soil
Hard/dense soil
Soft/ disintegrated rock
Material and labour for stone dust sand cushioning to under ground cable, provided with a layer 8 cm before and 15 cm after laying and punned down to 18cm thickness in total stretching jointing and testing the cable complete all as specified and directed [Note : Measuremenet will be done after punning]
Returning filling in , excavated soil including spreading, leveling and well ramming in layers not exc 25cms each any type of soil.
Supplying and laying PCC cable cover 250x150x40 mm, ISI marked, class LV Type-I
Removing the excavated materials not exc 50mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as directed by Engr - in- Charge.
M&L for PCC 1:2:4 using 20 mm aggregate for Foundation for Panel including necessary form work, grouting of panel, curing , including surface cleaning and well ramming before PCC work complete all as directed by Engr-In-Charge.
Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 10 sq mm ,4 core, 1100 Volts grade incl taking down of old cable.
Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 25 sq mm ,3.5 core, 1100 Volts gradeincl taking down of old cable.
Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 35 sq mm ,3.5 core, 1100 Volts gradeincl taking down of old cable.
Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 50 sq mm ,3.5 core, 1100 Volts gradeincl taking down of old cable.
Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 70 sq mm ,3.5 core, 1100 Volts gradeincl taking down of old cable.
Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 95 sq mm ,3.5 core, 1100 Volts gradeincl taking down of old cable.
Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 150 sq mm ,3.5 core, 1100 Volts gradeincl taking down of old cable.
Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 185 sq mm ,3.5 core, 1100 Volts gradeincl taking down of old cable.
Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 300 sq mm ,3.5 core, 1100 Volts gradeincl taking down of old cable.
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 70 to 95 sqmm
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 120 to 150 sqmm
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 185 to 240 sqmm
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 300 to 400 sqmm
Sunhari Electricals (BID ID -3493520)
MONA GENERATOR SEVICES PVT. LTD. (BID ID -3493096)
Star Electrical (BID ID -3493473)
Rama Electricals (BID ID -3499571)
somnath engineering corporation (BID ID -3492033)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.25 MB
8000COMMONPAGES.pdf
Tender Documents • 0.43 MB
8000PS.pdf
Tender Documents • 0.36 MB
BOQ_829368.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid