Press NIT-2 (2024-25) item No.1

Manually Excavation by labour to trace the pipe line at site with proper barricading and for miscellaneous works such as making space for lead joint, for packing rope, removing the sewer sludge a other allied works.

Arrangement of all safety equipment’s for the protection of staff to work at height and to make the working area free from all toxic gases and free from accident during working at site as per NHRC guidelines.

Charges of JCB with fuel, operator & Helper for excavation of earth & other related works as required at site, refilling the pit after completion of work.

Hire charges of long boom crane.

Dewatering of sewage water from 1100 mm dia. pumping from main inlet to suitable place with the help of submersible pump sets of desired capacity as per site requirement.

Providing of 1100 mm sluice valve at the line of kondli Gharoli SPS Make :- IVC/Kirloskar/DJB approved.

Providing Mild steel Pipe, 1100 mm dia 58 mtr. Thickness 10mm fabricated / manufactured out of MS plate of steel grade Fe 410 as per IS 3589:2001; internally coated polyurethane coating and externally / outside with epoxy coating; minimum thickness of M.S Plate as specified complete in all respect; with up to date amendments in relevant IS codes and as directed by Engineer -In -Charge.( 1100 mm nominal dia clear internal)

Providing of Mild steel specials fabricated item for 1100 mm pipe line, in 10 mm thickness such as bend 3 nos. 90 degree angle., collar 12 nos., flange 2 nos. TEE 1 no. as per requirement / manufactured out of MS plate of steel grade Fe 410 as per IS 3589:2001; internally coated polyurethane coating and externally / outside with epoxy coating; minimum thickness of M.S Plate as specified; complete in all respect; with up to date amendments in relevant IS codes and as directed by Engineer -In -Charge.( 1100 mm nominal dia clear internal)

Making the diversion of Rising main of Kondli-Gharoli 1100 mm dia (10 mm thickness) by laying of new 1100 mm Dia pipe & making interconnection with existing rising main, installation of sluice Gates, bends, flanges, Tee, collars, etc. this work to be executed with the help of Manpower, specialized tools & tackles, consumable materials etc. and as per the direction of Engineers In-charge.

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured In fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mlx design of specified grade for reinforced cement concrete work, including pumping of R.N.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement, Including cost of admixtures In recommended proportions as per IS : 9203 to accelerated retard setting of concrete, Improve writability without impairing strength and durability as per direction of the Engineer-In-Charge, 2*2*1.2- 2Nos.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) for 8.8*0.35*2.2 - 02 nos in mtr.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) above the channel of 45 MGD at side wall- 10*0.23*1.25 in mter

Making the plaster of brick work which make on the top lever of the channel 45 MGD CEMENT PLASTER (IN COARSE SAND) 1:4 (1 cement: 4 coarse sand) 10*1.25 in mter for four side.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more planning rates

Providing/ fixing of MS- Structure for supporting the 1100 mm pipe line from ground to level of the channel of 45 mgd , ISMB 250 and agngle 50x 50mm thickness 10 mm which connected the channel at top level of the channel including steel work riveted, bolted or welded in built up sections, trusses and framed, work including cutting , hoisting, fixing in position and applying a priming coat of approved stel primer all complete.

Brick work for making the chamber of sluice valve for operating with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) for 10*0.35*2.5 - 02 nos in mtr.

Making the plaster of brick work for the chamber of sluice valve for operating which make on the top lever of the channel 45 MGD CEMENT PLASTER (IN COARSE SAND) 1:4 (1 cement: 4 coarse sand) 10*2.5 in mter for four side

Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing of MS. Nut bolts with washer of various size.

Transportation charges for T&P, men and material of both side Including loading & unloading.

Testing & commissioning of complete system

Saawariya Technocrats