Karnataka

AOC

Works

Buildings

Construction of STP and ETP works to Arasikere Taluk Level Hospital at Hassan District.

Engineering Wing of Health and Family Welfare Department

EWHFWD Executive Engineer Office Mysore | Mysuru, Karnataka

Amount: ₹84.3 LCloses: 12 Mar 2026Closed

Timeline

Published5 Mar 2026
Closed12 Mar 2026
Awarded—

Bids

1 Bid12 Mar 2026

#	Company	Amount	Status
1	KRISHNA ₹88.4 Laccepted-aoc	₹88.4 L	accepted-aoc

Tender Value

₹84.3 L

EMD Value

₹1.7 L

Closing Date

12 Mar 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Engineering Wing of Health and Family Welfare Department

Contact Person

Prithvi D.M

Office Number

Work Description

Construction of STP and ETP works to Arasikere Taluk Level Hospital at Hassan District.

Tender Information

Tender ID

EWHFWD/2025-26/BD/WORK_INDENT1942

Reference Number

EWHFWD/2025-26/BD/WORK_INDENT1942

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

EWHFWD Executive Engineer Office Mysore

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredAnnual Turnover Certificate in the last five years 2020-21 to 2024-25 issued by charted accountant

RequiredGST Registration Certificate

RequiredKPWD Class-III and above Registration Certificate.

RequiredWork done certificate to be uploaded, which has to be issued not below the rank of Executive Engineer.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The Rates quoted by the tenderer shall be Exclusive of GST.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

Conditional tenders will not be accepted.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time.

Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected.

Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender.

All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose

Tenderers are required to read the Bid Documents carefully before submission of their bid

If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution.

If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM ( Monday to Saturday) Ph No: 91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time.

The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation.

Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work.

Tenderer should have latest GST Registration and latest clearance certificate in their name

Special Instructions to tenderers - as per bid document.

The Defects Liability Period is 1 year from the date of completion of the work.

Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2020-21, 2021-22, 2022-23 , 2023-24 & 2024-25

The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive.

Technical Criteria

General

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2020-21 to 2024-25) The tenderer should have been Satisfactorily completed at least one Similar nature of work of value not less than Rs. 42.13 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b).

Work Done Certificate

Clause ITT 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2020-21 to 2024-25). Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1)Earthwork Excavation- 388.11 Cum,2) PCC & RCC-98.75 Cum, 3)Steel Reinforcement for RCC work-10.54 Tonnes, 4) Cement Concrete Block Masonry/BBM/SSM/Areated block -87.20 Sqm 5) Flooring-213.95 Sqm. 6) Plastering -473.00 Sqm, 7)Painting-331.20 Sqm, Note -The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (c).

Work Done Certificate

Clause 3.2(d) To qualify for award of this contract The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works in the last five years i.e (2020-21 to 2024-25) totaling ------NA-------- in any one year Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d). The letter of willingness of the sub contractor to be engaged for electrical works should be obtained and uploaded in the KPP-portal

Work Done Certificate

Clause 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works in the last five years i.e (2020-21 to 2024-25)totaling Rs. 0.81 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e). The letter of willingness of the sub contractor to be engaged for water Supply works should be obtained and uploaded in the KPP-portal.

Work Done Certificate

Capabilities of Vendor

Clause 3.6 -Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx2.5-B Where A maximum value of civil engineering works executed in any one year during the last five years 2020-21 to 2024-25 updated to 2025-26 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2025-26 price level of existing commitments and ongoing works to be completed during the next 3 months. Note. The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Tender Capacity

KPWD Class-III and above Registration Certificate.

Others -- KPWD Class-III and above Registration Certificate.

GST Registration Certificate

GST Registration

Bidder address & Phone No.

Others -- Bidder address & Phone No.

Financial Status

Clause ITT 3.2 a)To qualify for award of this contract, each tenderer in its name should have in the last five years i.e. (2020-21 to 2024-25) a)achieved in at least two financial year a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.84.27 Lakhs Note : a) For Clause 3.2 (a) the certificate duly certified by the charted accountant is to be submitted.

Audited CA Certificate of Annual Turnover

Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs. 25.28 Lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor

Line of Credit

Fee & Financial Details

Tender Fee Amount

₹2,110

EMD Fee Amount

₹1.7 L

Important Dates

Last Activity

12 Mar 2026

Published

5 Mar 2026

Bid Opening

13 Mar 2026

Download Ends

10 Mar 2026

BOQ Preview

•

Construction of STP and ETP works to Arasikere Taluk Level Hospital at Hassan District. (Civil and Equipments)

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3)

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles above 25 ...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

•

Integral Crystalline water proofing Admixture - Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the p...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

White washing with lime to give an even shade :Old work (two coats) as per specifications and as per directions of Engineer in charge.

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior pai...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...

•

sTp (inside) waterproofing with Anticorrosive & protective Coating - Providing and Applying two component coal tar epoxy-based coating on inside surface of Sewage & Effluent treatment tank @ 0...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per direction...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dus...

•

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum & Cost of Haulage Excluding Loading and Unloading Taking output 10 t load and lead 5 km = 100 t.km (135+12x5x1.35)

•

Supplying, testing, Installtion and Commissioning of ETP - Effluent Pumps of size 1 HP, 3 Phase, to lift particle size of 25mm. Effluent transfer pumps one working & one standby for ETP complete wi...

•

Supplying, testing, Installtion and Commissioning of Agitator - Slow speed agitator/ Submerged Aerator for mixing ETP effluent complete with all lead and lift as per detailed specification and dir...

•

Supplying, testing, Installtion and Commissioning of Flocculator - Flocculator for mixing coagulants complete with all lead and lift as per detailed specification and directions of the Engineer inch...

•

Supplying, testing, Installtion and Commissioning of Chemical Dosing system - Dosing pumps, tank, strieres for mixing chemicals complete with all lead and lift as per detailed specification and dire...

•

Supplying, testing, Installtion and Commissioning of ETP modular plant - MS Epoxy coated pre fabricated ETP plant complete with all lead and lift as per detailed specification and directions of th...

•

Supplying, testing, Installtion and Commissioning of Electrical Panel - Non compartmentalised MCC panel with all control complete with Cabling with in Battery limit complete with all lead and lift a...

•

Supplying, testing, Installtion and Commissioning of Piping - Plant Piping, valves NRV complete complete with all lead and lift as per detailed specification and directions of the Engineer incharge...

•

Supplying, testing, Installtion and Commissioning of SS Bar screen - SS bar sreen to fitt in to Screening Chamber complete with all lead and lift as per detailed specification and directions of the ...

•

Supplying, testing, Installtion and Commissioning of M S bar screen

•

Size : 600 X 800 MM

•

Supplying of Bar Screen as to remove the large sized floating particles,made with guide angles in MS flat of 6.0...

•

Supplying, testing, Installtion and Commissioning of Raw Sewage Pumps

•

Duty: 7 KLH @10 M head.

•

Vertical Submersible sewage Pump CNP( TOSHIO)/LUBI/WILO / Equi Make

•

Supplying of 2 nos Vertica submersibl...

•

Supplying, testing, Installtion and Commissioning of Coarse bubble diffusers

•

90 dia x 800mm long MAX AIR Diffussers of

•

Make : Southern Scogen / Proflex / CFM

•

Air Volume -5 cum/Hr

•

Supplying of coarse b...

•

Supplying, testing, Installtion and Commissioning of Fine pore Diffusers

•

90 dia x1000mm long with membrane from

•

Make : Southern Scogen / Proflex / CFM

•

Air Volume 10-12 cum/Hr

•

Supplying of coarse bubbl...

•

Supplying, testing, Installtion and Commissioning of Air blowers ( for SBR Tank

•

Duty: 125 M3 /hr @ 5 MWC

•

Make : TMVT/Everest / A1 / Equi

•

Supplying of 2 nos Twin / Tri Lobe (One working + One stand by ...

•

Supplying, testing, Installtion and Commissioning of Return Sludge Pumps

•

Duty:5 KLH @10 M head.

•

Vertical Submersible sewage Pump CNP( TOSHIO)/LUBI/WILO / Equi Make

•

Supplying of 2 nos Vertica submersi...

•

Supplying, testing, Installtion and Commissioning of Filter Feed Pumps

•

Duty: 7 CUM PER HR @ 30 M head.

•

Make : Kirloskar / Johnson

•

Supplying of 2 nos Centrifugal type Filtter Feed Transfer pumps (One w...

•

Supplying, testing, Installtion and Commissioning of Chlorinator

•

Capacity : 0 - 6 lph

•

Make : Anala / E-Dose / Equi

•

Supplying of on line automatic electronic Sodium Hypo Dosing unit with automatically ...

•

Supplying, testing, Installtion and Commissioning of Pressure Sand filter

•

Size : 700 mm dia x 1800mm Ht

•

Supply of Multi Grade Sand media filter with MS Shell of 6mm & dished ends of 6mm with flange th...

•

Supplying, testing, Installtion and Commissioning of Activated carbon filter

•

Size : 600 mm dia x 1800mm Ht

•

Supply of Activated Caebon media filter with MS Shell of 6mm & dished ends of 6mm with flange...

•

Supplying, testing, Installtion and Commissioning of Decanter Mechanism

•

Make : Honeywell / equi

•

Size : Dia 100mm Butterfly valve with electrical actuator and spindle

•

Supplying of 1 no Decanter valve s...

•

Supplying, testing, Installtion and Commissioning of Electrical Panel

•

Make : L & T/Schneider/ABB -

•

Supply of MCC.Panel suitable for 415 V ,3 phase, 4 wire, 50 Hz distribution system. The panel shall b...

•

Electrical Cabling works

•

Electrical Cabling works of suitable size for all the equipements till the Panel with trays, earthing wires , glands, cable ties, supply, fixing and commissioning

•

Instrumentation

•

Electro-Magnetic Flow meter, Level Floats,Pressure gauges etc

•

Make : Aster / Magflow

•

supply, fixing and commissioning

•

Supplying, testing, Installtion and Commissioning of Centrifuge system with Centrifuge Feed Pumps

•

Make : Royal Precision / Airtec / equi

•

Supply of the Vertical type Solid Bowl Centrifugal Sludge handl...

•

Construction of STP and ETP works to Arasikere Taluk Level Hospital at Hassan District. (Water Supply works)

•

Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all l...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

•

Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 15 mm nominal bore

•

Providing and fixing C.P. brass long body bib cock of approved quality

•

conforming to IS standards and weighing not less than 690 g.

•

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-3 -1942- Arasikere.doc

Tender Document • 1.12 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

KRISHNA

₹88.4 Laccepted-aoc