Repairing Senior Quarter No. 5 Block A in the campus of Canal Colony Tohana (Re-tender)

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shuttr including chowkhats, architrave holdfasts etc. complete and stacking within 50 Mtrs lead of area 3 Sq metres and below (HSR item No. 5.29.1)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead (HSR item NO. 5.45)

12mm cement plaster 1:4 (HSR item No. 11.5.3)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of tile 600x600mm (HSR item No. 10.63.2)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps over 12mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of tile 600x600mm on skirting ( HSR item No. 10.58)

Providing and fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinawere cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respects as per direction of Engineer-in-charge (HSR item No. 22.34)

Distempering with oil bound washable distemper of approved branch and manufacture to give an even shade. New work (two or more coat) over and including water thinable priming coat with cement primer (HSR item No. 11.64.1)

Painting over the wooden/metal surface with aluminium paint of approved brand and manufacture to give an even shade. Two or more coat on new work (HSR item No. 11.84.1)

Finishing wall with water proffing cement paint of required shade : New work (Two or more coats applied @ 3.84Kg/10Sqm)

Providing wood work in frames of doors, windows, clerestury windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (Hold fast lugs or dash fastener shall be paid separately (HSR item No. 12.1.3)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White vitreous chinaware wash basing size 630x450mm with a pair of 15mm CP Brass pillar taps (HSR item No. 22.1.1)

Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete (HSR item No. 22.209)

Providing and fixing in position best Indian make C.P. brass Tooth Brush cum Tooth Paste Holder fixed in with rawl plugs with C.P. brass screws complete including cutting and making good the walls etc. Tooth brush cum tooth paste holder (HSR item No. 22.213.1)

Making suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless steel wire mesh 2 mm thick having about 50 meshes per inch at exhaust side complete as required (HSR item No. 23.11)

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (HSR item No. 22.119.2)

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (HSR item No. 22.117)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15mm nominal bore (HSR item No. 22.107.1)

Providing and fixing unplasticised PVC connection pipe with brass union 15mm nominal bore (HSR item No. 22.101.2.1)

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete 32mm dia (HSR item No. 22.14.2.1)

Providing and fixing CP brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms, 15mm nominal bore (HSR item No. 22.106)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20mm nominal outer dia pipes (HSR item No. 22.85.2)

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. (HSR item No. 22.38)