REPAIR REPLACEMENT TO JOINERY AND WINDOWS OF CERTAIN BUILDINGS AND POST CONSTRUCTION ATT AT NO 1 DOMESTIC AREA UNDER AOR OF AGE B R I UNDER GE AF PATHANKOT

Amount

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Note:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type C-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Note:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type C-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium arbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum oxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer-in-Charge. Note: Stainless steel butt hinges and necessary S S screws shall be paid separately. Note: All screws shall be self tapping chrome plated.

Supply and fixing 35mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified, including taking down with existing one complete all as specified and directed by Engineer-in-Charge. Note :- All screws shall be self tapping chrome plated.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Note:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type C-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N Face) & 900 N (Edge),minimum ressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to pread of flame of Class A category with property of being termite/borer proof, ter/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed by Engineer-in-Charge. Note: (a) Stainless steel butt hinges and necessary S S screws shall be paid separately. (b) All screws shall be self tapping chrome plated.

Supply and fixing factory made Flush door of 35 mm thick ,solid core construction with particle board core :- All screws shall be self tapping chrome plated complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 complete all as specified and directed by Engineer-in-Charge.

Material and supply preperation of new or previously untreated surfaces of wood or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Material and supply preparation of old painted wooden surfaces of any description and in any situation over 10 cm width or grith and applying one coat of synathetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stainless steel wire cloth fixed as in uPVC Window frame/Steel window box type frame/skeleton shutters frame etc, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staples, in steel or wooden windows/doors with wooden beads or at any place and situation complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size quality or description) from wooden/steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 3mm thick sheet glass ordinery quality and glazing with oil putty with pin in square n exc. 0.50 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory made Steel window 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) Handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) Stainless steel Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) Cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory made Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) Handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) Cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Note:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. Note:- During Fixing of Ventilator, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile etc and as per site requirement.

Supply and fixing 100mm long (12Gauge) butt hinges stainless steel anodised and fixed complete all as specified and directed by Engineer-in-Charge. Note: All screws shall be self tapping chrome plated and length of screw not less 38 mm

Supply and fixing in repair, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel sliding door bolts, plate type, with bright bolt not lesss than 10mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel Tower Bolt of 200 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel Tower Bolt of 150 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel handel of 150 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel handel of 125 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Taking down existing cabinets cupboards and Supply and fixing in repair factory made 20 mm thick solid WPC(wood particle composit) UV Printed prelam sheet having both side wood nature colour for cupboard partitions/slabs of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Note:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, Filling of concrete 1:3:6 type C-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement.

Material and supply for 0.80 mm thick PVC edge binding tape around the 20 mm thick PVC shutter edge colour complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Continuous (piano) hinges,Width of flaps (when open) in 30 mm flap stainless steel, bright finish or electro galvanished complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed by Engineer-in-Charge.

Framed work as in doors of gates of angles or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Mild steel, plain, black sheet in wall cladding, steel gates & similar work, cut to size, holes punched; including rounded headed screws, clout nails or revetSupply and fixingixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Material and supply preparation of new steel surfaces of any description and in any situation over 10 cm width or grith and applying two coat of synathetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and supply for repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs, double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govrning pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified complete including taking down aluminium door shutter and refixing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Mortice lock, vertical type 4 lever size 65 mm mild steel body ccomplete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair aluminium die cast body Door closer hydraulically regulated design No 2 universal type suitable for door shutter complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 5.00mm thick glass fixed with rubber packing for securing in aluminium/uPVC windows snap beading and metal pins in skelton shutters of doors and windows complete all as specified and directed by Engineer-in-Charge.

Supply and fixing solar control film 25 micron reflective type stick to glass panes as per manufactures instructions complete all as specified and directed by Engineer-in-Charge.

Material and supply for Easing of steel window shutters area not exc 2 Sqm each , including adjusting greasing/oiling to welded where as required easy opening and closing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Framed work such as grills,gratings etc.with ends of bars,shouldered and/or riveted,or forged into pikes,framed guard bars,etc complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware, replacing side rail as required including renewal of unserviceable screw, etc and refixing in same opening as required at site complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware, replacing bottom rail as required including renewal of unserviceable screw, etc and refixing in same opening as required at site complete all as specified and directed by Engineer-in-Charge.

Supply only second class hard wood, wrought, panel door side rail of sectional size exc 30 sqcm and not exc 50 Sqcm & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Supply only second class hard wood, wrought, panel door side rail of sectional size exc 50 sqcm and not exc 70 Sqcm & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Material and supply for Re securing or easing and adjusting without taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Drapery curtain rod of stainless steel 20mm dia complete with bracket heavy duty and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw and disturbed area to be made good with existing finishes complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Drapery curtain rod of SS heavy duty with SS bracket 20mm dia complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed by Engineer-in-Charge.

Supply and fixing aluminium door seal up to 1200mm long best quality complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 0.56mm plain aluminium sheeting to doors with aluminium screws fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimensionof uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of indow above 1.75 sqm upto 2.50 sqm) comprising of uPVC multi chambered frame, with inbuilt roller rack and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile imension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC ulti-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing in repair 5mm thick sheet PVC Fiber glass ordinery quality and glazing with Silicone Sealant for glass with pin in square n exc. 0.50 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for providing and fixing stainless steel (Grade 304) railing made of hollow ubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts omplete, including fixing the railing with necessary accessories & stainless steel dash asteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engineer-in-Charge.

Material and supply for providing & injecting chemical emulsion for post constructional anti-termite treatment along the external wall below concrete or masonary apron using chemical emulsion @2.25 lit/per linear meter including drilling and plugging holes etc all complete all as specified and directed by Engineer-in-Charge.

Material and supply for anti-termite treatment of soil under existing floors and junction of wall & floor, using chemical emulsion @ one lit per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) including white cementing and surface finishes to match the existing floors/walls complete all as specified and directed by Engineer-in-Charge.

Material and supply for post construction ATT of voids in masonary using chemical emulsion one litre per hole at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) including white cementing and surface finishes to match the existing floors/walls complete all as specified and directed by Engineer-in-Charge.

Material and supply for post construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 litre per hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same with white cement including surface finishes to match the existing surfaces complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel Hasp and staple of 100 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair, 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Door catcher/door magnet for cabinet cupboard fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

M/S HEAVEN BUILDERS AND ENGINEERS (BID ID -3378703)

Jay Ann Construction Company (BID ID -3378546)

M/S V K TRADERS (BID ID -3377896)

jagdambe traders (BID ID -3378570)

Ashoka Engineers (BID ID -3377873)

G.M. ENGINEERING SERVICES (BID ID -3378936)