CERTAIN SANCTIONED WORK AT REASI AND NAGROTA UNDER GE NAGROTA

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil.complete all as specified and directed

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Returing filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick.complete all as specified and directed.

M & L PCC 1:4:8 type D-2 (Using 40 mm grade aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M & L brick work with subclass ‘B’ bricks using old size straight on plan exc 6m mean radius built in cement mortar 1:4 as directed

Use and waste of formwork for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.

M&L forUse and waste of formwork for sides of columns posts, struts,piers square or rectangular or polygonal rough finished surface complete all as specified and directed.

M&L for Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in foundation, plinth beams,footings etc,.complete all as specified and directed.

M&L for Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in columns.complete all as specified and directed.

M&L for Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in floor or roof beams complete all as specified and directed.

M&L for Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in Slab and Chajja.complete all as specified and directed.

M & L TMT bar 10mm dia and over cut to length bend to shape required indd cranking bending spirally for column, hooking ends & binding with and incld mild steel wire (annealed) not less than 0.90mm dia or securing with chips complete all as specified and directed.

M & L TMT bar but 5mm dia and over upto and including 10mm dia in stirrups, spacers and bindersincluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

M&L rendering 15 mm thick on external fair faces brick /concrete surfaces of wall in cement mortar 1:4 rendering is to be finished even and smooth (without using extra lime or cement complete all as specified and directed.

M&L rendering 15 mm thick on external faces brick /concrete surfaces other than fair faces of wall in cement mortar 1:4 rendering is to be finished even and smooth (without using extra lime or cement complete all as specified and directed.

M & L preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Mild steel (MS Angle Iron) as in posts and struts in fencing incl cutting tops shape as directed welding, drilled notching for wire etc incl all necessary drilling etc. And similar work incl embedding in concrete conforming to Fe-410-0 or Fe-310-0 incl one shop coat of red oxide primer (incl preparation of surface) at contractor's work shop all as specified. (Unit rate also include for locking holes after fixing of barbed wire and welding to bent portion as directed.)complete all as specified and directed.

S & F Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc.complete all as specified and directed.

M&L Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-0 (using 12.5mm graded agg) as in Coping,roof kerbs or mud stops,benching , cills ,coping etc and like including weathering and slightly rounded or chamfered angles and throating including fair finishing to top surface and including form work where required complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 Cum, getting out, reterning filling and ramming earth or broken rubber mixed with earth around in layers not exceeing 25 cm, watering and removing surplus soil to a distance not exc. 50m and making good surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and directed

M&L plain cement concrete 1:4:8, type D2( using 40mm graded stone aggregate) 75mm thick as in sub base of floor complete all as specified and directed .

M&L for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 30mm thick stone grit cushion complete all as specified and directed.

S & F steel work in tubular trussles,purlins,rafters,tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to Fe 410W grade E 250 quality B, etc complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and directed.

S & F 0.50mm thick (including coated thickness) Pre-colour, pre-profiled ( Galvalume ) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/ profile maker instruction complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortor 1:6., etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and directed.(Note:- Liquid water proofing compound to be measured paid separately)

S&F aluminium power coated window and ventilator shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed.

S&F 3mm thick figured glass pin head type in square n.exc 0.5 Sqm in each pane new ventilator / window shutter complete all as specified and directed.

S&F Pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed..

S & F for 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F for stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.40mm & fixed with tacks or screws, wire staples, etc complete all as specified and directed.

M & L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth complete all as specified and as directed.

S&F for 20 to 25 mm dia stainless steel drapery curtain rod with brass /nickel chrom polish / designer lattos and brackets complete all as specified and approved by Engr-in-Charge including taking out old pelmet with curtain rods complete all as specified and directed.

M & L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant cement primer and over a coat of 2 to 3mm thick wall care putty complete all as specified and directed.

Material and Labour for apply two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer on new surfaces including 2 -3 mm thick wall putty, complete all as specified and directed. Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima) ,Berger (Super coat ) or ICI Dulux (weather shield) .Make of primer :- Asian (X2) or Equivalent . Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge. (b)Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.

S & F aluminium anodized / GI powder coated snap grid frame work of grid size 605x605mm including 6mm dia GI hangers (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium / powder coated cleat / corner pieces and GI 4mm dia,suspenders with utterfly clips, wall angle of size 24x24mm, main runner (tee) of size 24x38mm, cross tee of size 24x28mm, (No of suspenders shall be decided by the GE as per actual size requirement) including 6mm thick fibre cement plain building boards fixed to aluminium /GI powder coated snap grid and provinding two coats of oil bound distemper and including dismantling of a;; and ceiling board, any thickness including cover fillets if any complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation or etc, for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M & L cement concrete type B1 1:2:4 ( 20 mm graded aggregate) as in coping, bearing course, manhole/ drain channels etc in including necessary formwork complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregatre as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel exc 30 cm inner girth in cement concrete, using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and directed.

M & L for preparing new plastered surface on walls and applying three coat of white wash complete all as specified and directed.

M&L Reinforced Cement Concrete M-25 using 20 mm graded stone aggregate as in slabs supported on walls, deck slabs and in drain cover slabs , shelves and similar works etc complete all as specified and directed

S & F MS framed work as in rails, grills and braces etc complete, drilled for fixing of steel sheeting or other covering etc, including either hooks and hinges also fastening grills, grating, etc, and similar work confirming to fe 290 Gde E-165 complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles.complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness.complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided.complete all as specified and directed.

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically providecomplete all as specified and directed. d reinforcement cut as required to facilitate demoltion.

Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing),removing serviceable tiles to store and rubbish off the premises.complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site.complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site.complete all as specified and directed.

M & L brick work with sub class B bricks straight or curved on planexc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L 40mm thick PCC 1:2:4 damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L rendering 10mm th plaster in CM 1:6 on fair faces of brick or concrete surfaces(internal walls) finished fair and even without using extra cement complete all as specified and as directed.

M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including three coat of white wash on ceiling including preparation of surface .

M&L for Brick work with subclass 'B' bricks straight or curved on plan to any radius half brick thick wall built in CM 1:4 complete all as specified and directed.

M L for Moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etcall as specified & directed.

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface. complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floors finished even surface.complete all as specified and directed.

M & L for 62 cm wide Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match. complete all as specified and directed.

All as above item No 67 but of size 550x 75 - 100mm (as on edges of cooking plateform

S&F 19mm thick solid PVC board prelaminated one side vinereed and other side plain as in cupboard shutter,shelves, partitions and kitchen cabinets ( Board must be water proofing ,termite proof) .complete all as specified and directed.

M&L for Block boards 18/19mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work. complete all as specified and directed.

S & F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing. complete all as specified and directed.

S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing. complete all as specified and directed.

Dismantling brick tiles or terracing tile, single layer on roof including cleaning the roof surface and filling the cracks with silicon compound if obsserved on roof complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate ) 50mm thick as in padding finished even and smooth witout using extra cement complete all as specified and directed.

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm complete all as specified and directed.

M&L for Laying APP modified membrane 3mm thick and weighing not less than 3 kg/sqm with 160 GSM/sqm, non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap, the membrane has to be laid with LPG tourch and over lap sealed and finished neat over roof including a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm over APP membrane.complete all as specified and directed.

M&L for Cement concrete tiles 25 cm x 25cm x20mm thick machine pressed set jointed and pointed in neat cement slurry on roof over APP membrane laid over 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Forming square grooves in plaster n exc 12mm deep and n exc 15mm on face complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and directed.

S&F as in repair stainless steel sink made from AISI-304 (18/8) gde steel of 1mm over all size 688x534 bowl size 610x455x250mm complete all as directed by Engineer-in-Charge & with following specification :- (a) Stainless steel waste coupling. (b) 02 Nos MS angle iron bracket 45cm long made out of MS angle iron 35x35x5mm. (c) Waste pipe and waste coupling.

M&L for cement concrete 1:3:6 type C2, 75mm thick with using extra cemnet as in plinth protection.complete all as specified and directed.

M&L for 100mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base complete all as specified and directed.

M & L for Vitrified Ceramic tiles 10 mm thick Light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.

M&L 450x 300mm thick coloured glazed ceramic tiles as on walls/ vertical surfaces over 15mm cement rendering in cement mortar 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ) , removing serviceable tile to store and rubbish off the premises.complete all as specified and directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).( Jinal Section)

M&L for Machine cut kota stone flooring 18-20 mm khick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 Kg/Sqm of surface.complete all as specified and directed

All as per item No 87 above but as in dado/ Skirting

M&L preparing surface plastered or unplastered on wall with two coats of Cement base paint complete all as specified and directed.

Preparation of newly plastered surfces of walls and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as specified and directed.

M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .complete all as specified and directed.

M&L for Complete removal of existing treatment applying two coats of cement base paint old wall surface .complete all as specified and directed.

M&L for Preparation of new plastered surfaces of ceiling and applying two coat of white washing,complete all as specified and directed.

M&L for Preparation of old plastered surfaces of ceiling and applying two coat of white washing, complete all as specified and directed.

S&F for vitrious china wash basin, white flat back size 550x400mm including waste, chain & plug andporeclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for sink etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted complete all as specified and directed.

M&L 20mm bore steel tubing medium grade galvanised with all fittings and laid in trenches floors complete all as specified and directed by Engineer-in-Charge.

M&L 25 mm bore steel tubing medium grade galvanised with all fittings and laid in trenches floors complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm fancy/concealed type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm concealed/concealed type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mmbore GI tube all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks complete all as specified and directed.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube.bore complete all as specified and directed.

S/F PVC(SWR)75mm borepipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

S/F PVC(SWR)110 mm borepipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap(S/P), plain with grating including jointing with solvent cement bore complete all as specified and directed.

PVC (SWR)bend 110mm bore bore complete all as specified and directed.

PVC (SWR)bend 75mm bore complete all as specified and directed.

Supply and fixed PVC (SWR) vent cowl, 100mm bore complete all as specified and directed.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F PTMT waste coupling of 32mm dia for wash basin/urinal all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm bore complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5Sqm in each pane complete.

S&F galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in repairs complete all as directed at site.complete all as specified and directed.

S&F Aluminium handles, cast type anodised 100mm size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 150 mm long.complete all as specified and directed.

S&F MS 100 mm size butt hinges medium wt. of cold rolled complete and all as specified and directed

S&F 300 mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminum alloy & fixed complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and directed.

M/L for 35mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 30 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in drain and surface channel complete all as specified (Forming fair finished to drain/channels shall be measured and paid for separately.)complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds,mitred/stopped ends etc complete all as specified and directed.

M/L for PCC (1:3:6) Type C1 using 20mm graded stone agg as in surface channel & drain incl form work. complete all as specified and directed.

S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Surface excavation nexc 30cm and averaging 15cm deep in soft/hard soil bore complete all as specified and directed.

M & L Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified and directed.

M&L machine pressed coloured pre cast concrete interlocking paver block ( with grey cement and no pigment) any shape and size confirming to IS -15658-2006 of 80 mm thickness ,Electrovibro (M-40 grade) galzed finished block complete all as specified and directed.

SCHEDULE ‘A’ PART-II M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20 mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2 mm thick covered with 3 mm thick bakelite laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the One socket out let 5 Amp controlled by one switch on independent board.complete all as specified and directed.

All as per item No 131 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board. complete all as specified and directed.

All as per item No 131 here in before but point wiring with 4 sqmm FRLS multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor for controlled by two pin and earth plug and socket complete with one single pole MCB 20 amp 240V complete all as specified and directed.

S&F Single pole mcb with a two pin and earth plug and socket complete with one single pole MCB 20 amp 240V

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type complete all as specified and directed.

S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link Vertical TPN 4 way suitable for MCCBas incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar including 125 A MCCB as incomer 16 KA complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces complete all as specified and directed.

S&F MCB single pole 5 to 32 Amps 10 KA 240 volts "C" series complete all as specified and directed.

S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete all as specified and directed.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sq mm as earth continuity conductor connected to commen earth and earth dolly complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 95 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge

Supply, Fixing , Commissioning and testing of CPRI approved outdoor cubical type LT Feeder Piller box suitable for 415 V, 3 Phase , 4 wire 50 Hz , AC Supply system fabricated from MS sheet totally encloused ,dust, weather & vermin proof , 3.00 mm thick for outer shell and 2 mm thick for inner shell having MS section not less than 50x50x6 mm thick having TPN aluminium busbar of capacity 315 Amps mounted on porcelain insulator duly drilled hole for cable connection including front and rear side opening with locking arrangement, with MCCB 4P 160 Amp, 36 KA, 415 Volts 50 Hz with adjustable thermal and adjustable magnetic setting and provn for incoming and outgoing cables with glands including control wiring with minimum 2.5 sqmm PVC insulated copper conductor for measuring of voltage, amp with indicators RYB ,painting with two coat of smoke grey synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. Note:- Feeder pillar box shall be mounted on brickwork in CM 1:4 not less than 30 cm above ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate.

Supply and fix wall mounted Busbar chambers 415 V, 3 phase, 4 wire 50 Hz AC supply system fabricated from stainless steel with 3 mm thick for outer cell TPN aluminium busbar of cap 100 Amp 4 pole 8 way connected with proper Nut and bolt complete all as specfied and directed by Engineer -in-charge.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick bakelite laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for one light point / bell point / fan point controlled by one switch 5 Amp.complete all as specified and directed.

All as per item No 145 above but One socket out let 5Amp controlled by one switch on same board.

All as per item No 145 above but One socket out let 5 Amp controlled by one switch on independent board.

All as per item No 145 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board. complete all as specified and directed.

S&F switch piano flush type 5 Amps single pole one way complete all as specified and directed.

S&F socket outlet 5 pin, 5 Amp flush type complete all as specified and directed.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) compatible conventional fan regulator complete all as specified and directed..

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and directed.

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings including 7 Watt LED bulb complete all as specified and directed.

Supply & fixing heavy duty Metal body Exhaust fan 300 mm sweep single phase AC 230/240V complete with louvers. complete all as specified and directed.

S&F building security light luminaries eenergy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20 mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly earth dolly for modular One light point / fan point / bell point controlled by one switch 5 Amp complete all as specified and directed by Engr-In-Charge ( Note : Modular box with cover shall be measured & paid for seperately under respective items )

All as per item No 159 above but One socket out let 5 Amp controlled by one switch on independent board.

All as per item No 159 above here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.

S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and directed.

S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.

S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 6 module complete all as specified and directed.

All as per Item No-166 above but 3 module complete all as specified.

Supply and fixing warm LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. .

Supply and fix Automatic change over switch 100 Amp of rated Voltage 415 Volt , 50 Hz , 3 Phase for constant supply of Mains and generator complete all as specfied and directed.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections.complete all as specified and directed.

M&L for Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground preferably in vertical position (Earth pit not less than 2.25 mtr below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 25×4 mm by means of bolts, nuts, check nuts and washers of galvanised iron including pit of PCC (1:2:4) type B-1, pre cast RCC cover slab of size 550x550x75mm, XPM reinforced not less than 1.60Kg/Sqm with suitable built in handle made from 12mm dia MS round bar, excavation and earth work in any type of soil, 20mm bore medium grade galvanised iron water tubing fixed with cast iron funnel and wire mesh at one end, 15mm bore light grade galvanised iron protection pipe for earth lead wire upto 5m length, charcol, common salt complete all as shown in electric plate No 3 of SSR 2009 Part I connected to equipment, complete all as specified and testing on completion all as directed. Note : Value of earth resistance shall be less than 4 Ohm , if desired result is not achieved then entire earthing will be redone by contractor. complete all as specified and directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm bore for watering complete , all excavation and earth work & connecting the earthing to an earthing test point /Panel as specified and testing on completion complete all as directed.

Supply and fixing of aluminium strip 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed.

M/S KALSI ENGINEERS AND CONTRACTORS (BID ID -3139188)

ASHWANI KUMAR KHAJURIA AND SONS (BID ID -3138500)

Mohd Rafiq and Co (BID ID -3138994)

M/S PARAMJEET SINGH (BID ID -3131546)

MAMTA ENTERPRISES (BID ID -3138977)