SPECIAL REPAIR TO BLDG NO ET 50 OF ASC CENTRE AND COLLEGE UNDER GE (CENTRAL) BANGALORE

Amount

Dismantling Asbestos cement (corrugated, semi corrugated etc,) sheets in roof covering complete all as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified directed

Dismantling batten of tiles shingles etc of any size including tiling fillets, spaced exc 15 cm complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over section in fixed any position, unframed work complete all as specified and directed.

Dismantling unframed fillets,rails,posts,rafters,purlins,etc under 40Sqcm in section complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15cm thickness (below or above GL) as in plinth protection/path/Hard standing/floor etc. complete removal of debris outside MD land complete all as specified directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land complete all as specified and directed

Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provide for ( reinforcement cut as required to facilitate demolition) complete all as directed.

Demolition of brick work or PCC solid block or stone/boulder masonry built in cement mortar complete all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but not exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description not exc 1.0 Sqm each complete all as specified and directed.

Taking down shutters of any sescription exc 1.0 sqm and n.exc 2.0 sqm each complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating (AZ 150) GI based corrugated steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating (AZ 150) GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Second class hardwood boarding 20mm thick supplied and fixed with nails in any situation (except flooring and skirting) planed one side with butt joints complete all as specified and directed.

Fixing only second class hardwood boarding 20mm thick complete all as specified and directed.

Second class hard wood in Scantling clean sawn and fixed complete all as specified and directed.

Second class hardwood clean sawn as in plain fillets, square, rectangular, in section secured with nails or brads of sectional area exc 13 but n.exc.25 Sqcm complete all as directed.

Second class hardwood clean sawn battens of sectional area exc 5 but n.exc.15 Sqcm spaced at 30cm centres complete all as directed.

Cement concrete 1:2:4, type B0 (12.50mm graded stone aggregate) for 25mm thick floor as in sub base for floor tiles complete all as directed.

Nonskid Coloured Ceramic tiles 10 mm thick area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1:6 complete all as specified and directed.

Nonskid Coloured Ceramic tiles 10mm thick area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm in vertical surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 Complete all as specified and directed.

Non skid coloured ceramic tiles 10mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white/light shade cement to match the tiles including 15 mm thick screed bed in CM 1:6 Complete all as specified and directed.

Glazed ceramic coloured tiles (300x200mm) x 5.50mm thick on vertical surfaces such as dados and risers to step etc, set and jointed in neat cement slurry and pointed in white/light shade cement to match the tiles including 10mm thick rendering in CM 1:4 Complete all as specified and directed.

75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor Complete all as specified and directed.

PCC 1:3:6 type C2 75 mm thick (using 40mm graded aggregate) as in Plinth protection finished the concrete surface even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and directed.

Rendering in 15 mm thick in cement mortar 1:4, on fair faces of brick work, finished even and smooth without using extra cement complete all as specified complete all as specified and directed.

Complete removal of existing treatment and preparation of surface of wall ,washing,rubbing down and stopping of distempered and painted surface ,applying one coat of wall care putty for smooth finished of the surface and applying two coat of oil bound distemper over a coat of chalk whiting primer all as specified and complete all as directed.

Preparation of new surface of wall and applying two coat of distemper oil bound over a coat of chalk whiting priming coat over one coat of wall care putty for smooth finished of the surface complete all as directed.

Preparation of old decorated surfaces of walls by complete removal of existing treatment and two coats of Acrylic paint, one coat of primer complete all as directed.

Preparation of Newly plastered surface and applying two coats of Acrylic paint over one coat of primer on Walls complete all as directed.

Box type steel windows/ ventilators double side shutters (windows side hung type, ventilators top hung) pressed steel frames made out CRC sheet of 80x60x1.25mm double rebated, shutters box type made out of CRC sheet of 40x20x1.0mm, windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, aluminium die cast handles for glass shutters iron flat type handles for mesh shutters, telescopic stays etc including 12mm square guard bars/ grill welded with steel frame (100c/c horizontically) complete all as specified and directed. Note :- (i) Payment under this item will be make combined for steel frames, steel shutters and guard board/ grill, however unit rate quoted shall deemed to include cost of beading fittings such as handles hinges telescopic stays locking arrangements and fixing of glass and wire mesh etc. (ii) Supply only 4mm thick sheet galss and stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/ Guard bars, Handle, hinges and locking arrangements shall not be accounted for payment purpose. Note: All windows/ vent design as per CECZ TD drg No 539).

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as directed.

Second class hard wood glazed and skeleton shutters, 30mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24- (a), supplied and fitted to chowkats complete all as specified and directed.

30 mm flush door shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as directed.

Second class hard wood 30 mm thick glazed and skelton shutters for window,divided in squares open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing gauge etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a) supplied and fitted to frames complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surface in CM 1:4 surface finished even and smooth surface without using extra cement including WPC (WPC measured and paid seprately). complete all as specified and directed.

Applying oil bound bitumen primer @ 1.50 Kg/Sqm and providing 3 mm thick APP modified water proofing membrane weighing 3.0 kg/sqm reinforced with non woven polyester matt weighing not less than 150 gm /sqm having softening point not less than 140 centigrate, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg /Sqm top of membrane surface shall then be finished with solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm complete all as specified and directed. (WPC measured and paid seprately)

Preparation of New Wood surface and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as directed.

Preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as directed.

Preparation of Old painted surface of Steel of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as directed.

Preparing new surface of steel material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as directed.

Hacking out old broken glass (any thicknes, size, quality or desctiption) from metal frame including punching or drillilng out old glazing pins/spring clips and providing and fixing new ones complete all as directed.

4mm thick sheet glass ordinary quality and glazing with oil putty in square/rectangular n.exc 0.50 sqm in each panes complete all as directed.

4mm figured glass pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as directed.

S&F stainless steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40 mm fixed with wooden beeds complete all as directed.

Butt hinges 100mm mild steel cold rolled, medium weight complete all as directed.

Butt hinges 75mm mild steel cold rolled, medium weight complete all as directed.

Small fittings such as brackets of any type latch and hinges blocks shaped door and window stops and the like incl all necessary labour articles not ec 200 Cucm each in 2nd class hard wood complete all as directed.

125 mm long aluminium anodized handles cast type complete all as directed.

100 mm long aluminium anodized handles cast type complete all as directed.

S&F in repairs 100 mm long aluminium anodized handles cast type complete all as directed.

200mm long aluminium, anodized barrel tower bolts of extruded section complete all as directed.

125mm long aluminium, anodized barrel tower bolts of extruded section complete all as directed.

100mm long aluminium, anodized barrel tower bolts of extruded section complete all as directed.

S&F in repair 100 mm long Aluminium, anodized barrel tower bolts of extruded section complete all as directed.

300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

Hasp & staple size 100mm aluminium anodised, safety type, including bolt to hinge plate and fixed with screw complete all as directed.

S&F in repair 20mm dia aluminium anodised decorative type curtain rods complete all as directed.

S&F in repair decorative type curtain rod brackets complete all as directed.

S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring) complete all as directed.

Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick all as specified and directed.

Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S&F in repair 500 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

20mm outer dia CPVC Pipe (ISI Marked) fixed complete to wall, celing or floors including taking up or down 15mm bore steel tubing complete all as specified and directed.

Supply & fixing in repair vitreous china wash basin white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including supply and fixing of waste fittings, brass etc complete all as specified and directed.

Pillar Cock chromium plated fancy type cast copper alloy complete all as specified and directed. Make : Prayag Cat No-7202 or equivalent in specified make.

S&F in repairs vitreous China wash down water closet (Orrissa pattern , white (excluding flushig cistern and flush pipe) and connection to drain or out going pipe and flushing pipe complete all as specified and directed.

S & F in repairs vitreous china wash down water closet (Padestal Pattern) Coloured (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 600mm long etc complete all as specified and directed.

S&F in repairs 15mm bib cock with wall flange chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron/cpvc pipe or for union complete all as specified and directed. Make : Prayag Cat No-7306 or equivalent in specified make.

S&F in repairs Stop cock/Angle stop cock, 15 mm bore, cast copper alloy chromium plated fancy type with long shank and cup concealed type complete all as directed. Make : Prayag Cat 7226 or Equivalent in specifed make.

S&F in repairs Brass chromium plated tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges complete all as specified and directed.

S&F in repairs Shower rose 95 mm dia with or without swivel joints, connecting to steel pipe or union complete all as specified. Make : Make : Cera F7020302

S&F in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified and directed.

PVC (SWR) bends 110mm dia any radius complete all as specified and directed.

PVC (SWR) bends 75 mm dia any radius complete all as specified and directed.

Providing brick work in CM 1:6 , 23 cm thick and 15cm high along external walls to fill the gap including plastering 15mm thick in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Precast cement concrete block masonry with solid blocks, type C1 1:3:6 (using 20mm graded crushed hard granite stone aggregate) exc 10cm width & setting in C.M 1:6 complete all as directed.

Mild steel TMT bars 10mm dia and over , cut to length bent to shape required,including cranking, spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia complete all as directed.

Providing Precast reinforced cement concrete , Tyep B1 1:2:4 set in CM 1:4 as in cover slabs for manholes/chamber complete all as directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote Oil complete all as specified and directed.

Old/New Tiles or slate battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with Creosite Oil complete all as specified and directed.

Health faucet brass, chromium plated with connecting pipe 1 Meter long with stand complete all as specified and directed. Make : Make: Cera Cat No: F8030103

S&F in repair CP Soap dish fixed to wall with chromium plated brass screws complete all as specified and directed. Make : Make : Cera Ormond Cat No : F5003106)

4 mm thick of size 600x600mm HSPC (High pressure steam cured) pre-primetered self embossed, textured designer board E-Board Classic( White colour) to be fixed and including Aluminium based powder coated snap grid/ section size 600x600mm with main runner38x24x0.9mm thick, cross tee 28.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 4 mm dia GI barhangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purline from the roof with alignment clip including providing provision for light fixtures of any size complete all as specified.

Supply only integral water proofing compound complete all as specified and directed

Taking down copper / aluminum point wiring (light, fan, socket or power) complete, including fixture and fitings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc and making good disturbed surfaces of walls, floors, etc to match with the existing surface complete all as specified and directed by Engr-in-Charge.

Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor FRLS 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC casing caping conforming to IS-9537 with all accessories fixed on wall, including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with steel screw for mounting switches, sockets, regulator etc including FRLS 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as specified for :-

(a) One light point controlled by one switch

(b) One Ceiling fan point controlled by one switch

(c) One 5 Amps switch socket combination on independent board

(d) One 5 Amps switch socket combination on same board with other switches.

All same as per item No 98 here-in-before but with FRLS 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and directed.

Sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable FRLS conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including PVC casing caping fixed on wall with all accessories such as Tees, Elbows, junction box etc as required alongwith one run of FRLS 6.0 Sqcm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed.

Switch piano, 5 Amps 240 volts flush type AC (ISI marked) complete all as specified and directed.

Switch socket combination 2 in 1, 5 Amps flush type 240 volts AC, ISI marked, suitable for inserting 2 pin 5 Amps/3 Pin 5 Amps plug top complete all as specified and directed.

Switch socket combination 15 Amps 240 volts AC (ISI marked) 2-in-1 flush type 6 pin suitable for inserting 3 pin 5 Amps / 3 pin 15 Amps plug top Complete all as specified and directed.

Ceiling rose surface type bakelite 65x50mm, 240 Volts AC, 3 terminal PVC Polycorbonate isolated body complete all as specified and directed.

Taking down Ceiling fan any make,size,sealing cable end,dismantelling blades and removing fan and blades and deposited to store and refixing after painting white in colour completion of work all as specified and directed .

Stepped type electronic fan regulator flush type,up to 300 watts, 50C/S, 230 V. AC complete all as specified and directed.

Surface and wall mounted LED battern tube light fitting 20 watts extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver 230 volts all pre wired fixed on walls with all fixing accessories such as 2 Nos of PVC square/ round boxes screws etc and connecting up with three core flexible copper conductor cable of size 24/0 20 sqmm complete all as specified and directed. Make : CG Cat Part No CCS-100-20-65-HL2-DP-NWH or eqivalent in Havells/Bajaj/Philips

Energy saving enviomental friendly long life,with high power LED bldg security light 25 watts pressure die-cast Aluminium,heat resistant glass with IP-65 protection,better option for uniform ditribution of light,all accessories including bracket made out of GI pipe 32mm bore medium grade of length upto 1.5mtr, bend to shape and all prewired including 2 Nos MS fixing clamp bolt, nuts complete and making necessary connection by using with 3 core flexible copper conductor PVC insulated cable wire 4/0.20 mm size and testing on installation complete all as directed. Make : CG Cat Part No : LSTS-25-CDL-M or equivalent in Havells/Bajaj/Philips

Sheet metal enclosure double door type MCB DB TPN 4- way, 430 volts AC factory made,IP-43 Protection,Isolated neutral bar suitable for housing MCB SPN and SP along with 200 Amps copper,insulated bus bar assembly, complete concealed in wall,all as specified and directed.

Sheet metal enclosure double door type MCB DB SPN 8- way, 240 volts AC factory made,IP-43 Protection,Isolated neutral bar, suitable for housing MCB SPN and SP along with 200 Amps copper bus bar complete conceiled in wall,all as specified and directed.

MCB TPN 63 Amps, 10 KA Rupturing capacity,ISI/CE Marked as per IS/IEC 60898,operating voltage 440V AC 3 phase 50c/s complete all as specified and directed.

MCB SPN 32 Amps, 10 KA Rupturing capacity,ISI/CE Marked as per IS/IEC 60898,operating voltage 240V AC 50c/s.complete all as specified and directed.

MCB SP 6-32 Amps, 10 KA Rupturing capacity,ISI/CE Marked as per IS/IEC 60898,operating voltage 240V AC 50c/s complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long including protection pipe 25mm bore medium grade and watering pipe by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including testing and dismantling of old earthing complete all as directed.

GI Pipe light grade 40mm dia laid in trenches dust/pole/wall/floor for cable ptotection complete all as directed.

M&L for fixing 09 Nos 5 Amps socket in a single board fixed on wall, including fabricated MS terminal boxes of 1.2mm thick, laminated sheet top cover 3 mm thick with steel screw for mounting sockets all internal wiring complete all as specified and directed. Note :- DB to socket board wiring shall be measured and paid separately.

PRACHANIVA CONSTRUCTIONS

HRML CONSTRUCTIONS

PRAGATHI BUILDERS