REPAIR IMPROVEMENT REPLACEMENT OF UNSERVICEABLE IRP ACCESSORIES BULK WATER METER CONTROL VALVES AVIATION LIGHT DIGITAL WATER LEVEL INDICATOR ETC AND REPAIR REPLACEMENT OF UNSERVICEABLE EXTERNAL PIPE LINES HYDRANT VALVE PANELS ETC AT VARIOUS LOCATION

Amount

Opening of Front loading type washing machine of capacity 50 kg and dismantling unit after disconnection of electrical /steamline and taking out of the shaft, pully with others spares for carryout inspection of all bearing, bush, coupling, pully and overhauling the same, rectification the defects including repacement of unserviceable spare parts and assembling the same for smooth running after apply approved grade of grease , gasket nut bolt washer etc. (NOTE : Spare required will be measured under separate item) complete all as specified and directed..

All as per item 1.00 here-in-before but for Hydro extractor top loading type of capacity 25 kg

All as per item 1.00 here-in-before but for Dry Tumbler front loading type of capacity 50 Kg

Supply only the following spares for washing machine/sluicing machine/drying tumbler/Hydro Extractor/Flat bed press including removing unserviceable old one complete all as specified and directed..

Solenoid coil AC 220/230 Volt AC 50 Hz 15 W (Make: BCH/FLOCON/ or equivalent as listed in list of make)

Solenoid break coil AC 220/230 volt, 50 Hz (Make: BCH, type SP50MC21 or equivalent as listed in list of make)

Ball bearing No. 6206 ZZ including taking out old one (Make - SKF/TATA or equivalent as listed in list of make).

Ball bearings No 6306ZZ with water seal cover, nut, bolt, jum nut, bearing socket. (Make: SKF/TATA or equivalent as listed in list of make).

Ball bearing No. 6209K with water seal cover nut, bolt, jum nut, bearing socket.

Door gasket set heat proof 25mm x 25mm size with fixing solution.

High tension stainless steel compressed spring 6" long 1" dia.

Cotton padding with nylon ribbon for binding of size 8 mtr x 1.8 Mtr including cutting/streching.

Cotton padding for Flat bed Press

V-Belt, size B-100 (Make - Fenner/Nirlon or equivalent as listed in list of make).

V-Belt, size B-73 (Make - Fenner/Nirlon or equivalent as listed in list of make).

V-Belt, size B-70 (Make - Fenner/Nirlon or equivalent as listed in list of make).

V-Belt of size A-54 /A-62

Timmer (0-15/0-60), 120/250V (Make - DIEHL Germany/L&T or equivalent as listed in list of make).

Over load relay 4-6 Amp/6-10 A type ML (Make: L&T or equivalent as listed in list of make) with copper wire/lug/socket for connection.

Power contactor type ML 1.5 (Make: L&T or equivalent as listed in list of make) with copper wire, lugs, socket for connection.

Push button ON/OFF (Make - L&T/Siemen/BCH or equivalent as listed in list of make).

P.U Tube (6mm x 8 mm) with flare nut of length 1.5 mtr for Flat bed Press

Stainless steel shaft (As per sample) with Key, key gud for Hydro/washing Machine

Power contractor NHD 25 A 4 pole coil voltage 415 V 50 HZ (Make : BCH/L&T or equivalent as listed in list of make)

Auxillary contract block for NHD 25

Ruber Hose mounting bush cone type for Hydro extractor machine ( Botton 13.5 cm x Top 11.5 cm x Height 9.5 cm Aprox)

S&F Safety relief valve Bronze 25mm Angle type 150-250 PSI (Make: Neeta or equivalent as listed in list of make) as per IBR including necessary fittings.

S&F Main contactor 415 V 50 Hz 40 Amps(Make: Siemens / L&T or equivalent as listed in list of make Type ML-3) complete all as specified and directed..

Disconnection the main electrical connection from LT pannel board of Boiler plant and removing old/unserviceable electrical wires of sizes and rewiring of LT pannel board complete with PVC 2.5 / 4 / 10 sqmm copper wire 1100 volts FRLS with suitable copper plugs, clips and cable conection complete all as specified and directed.

Supply and replace Rope Asbestos 8mm square for RXA -06 complete all as specified and directed..

Supply and replace solenoid coil 220 volt AC 50 Hz, 1.5 Watt taking out old one (Make : BCH/BB Pneumaties or equivalent as listed in list of make) complete all as specified and directed..

Supply and replace Magnetic coil 220 volt AC after taking out old one complete all as specified and directed..

Supply and replace packing Asbestos for photocell base for RXA -06 complete all as specified and directed..

Supply and replace oil seal (85-102-11) for Hydrolic Air Piston complete all as specified and directed..

S&F steam globe stop valve 50mm dia screw type with hand wheel including necessary fitting suitable for steam line after taking out old one complete all as specified and directed.. Make - Zoloto/Neeta or equivalent as listed in list of make

S&F steam globe stop valve 25mm dia with hand wheel including necessary fitting suitable for steam line after taking out old one complete all as specified and directed.. Make - Zoloto/Neeta or equivalent as listed in list of make

S&F steam globe stop valve 20mm dia screw type with hand wheel including necessary fitting suitable for steam line after taking out old one complete all as specified and directed.. (Make - Zoloto/NEETA or equivalent as listed in list of make).

Dismantling and taking down the existing electrical induction motor 3 Phase 415 volt of capacity 5 HP from base drive pully after disconnecting all electrical connection, striping out the motor complete for overhauling, servicing the motor winding by any hot compressed air and cleaning the winding with thinner and apply two coats of antimoisture heat resistance insulating vernish and drying up, cleaning the rotor and stator, replacement of defective parts such as bearing, terminal plate and reassembling the motor and refitting the same for smooth running of the machine (spares parts for repair will be supplied under separate item) complete all as specified and directed.

All as per item No. 17.00 here-in-before but capacity 3.00 HP.

All as per item No. 17.00 here-in-before but capacity upto 2.00 HP.

All as per item No. 17.00 here-in-before but capacity upto 1.00 HP.

Dismantaling the steam coil assemly of dryer Machine and supply & fixing of suitable steam coil assembly after taking out old one and testing complete all as specified and as directed. (Make - ICL or equivalent as listed in list of make).

S&F Globe type non return valve bronze 15mm BSPT bore with necessary fitting suitable for steam line after taking out old one complete all as specified and directed.. (Make - Zoloto /Neeta or equivalent as listed in list of make)

Supply and replace diffuser plate 132mm dia for RXA-06 after taking out old one complete all as specified and directed..

Dismantaling of mutiport valve for water softener plant and S&F newmulti port valve up flow type US 8 and testing complete all as specified and as directed. after taking out old one complete all as specified and directed.. ( Make : Initiative or equivalent as listed in list of make).

S&F metallic braded rubber hose of size 25 mm, length 1.2 mtr for inlet water line including fittings, clamp after taking out old one complete all as specified and directed.

S & F water Softmer unit type US-8 or equivalent for boiler RXA-06 Boiler Plant with necessary connection with necessary connection with the existing system complete all as specified and directed.

Dismantling of old exoist line of Boiler and modification of exoist line by providing new M.S. Steam pipe class 'C' tata 6 mtr of size 40 mm with necessary flanges , nut washer complete for smooth pairing of steam complete all as specified and directed.

S & F Brass Steam ball valve of size 65 mm dia including necessary bend, Elbow, nipple & socket complete all as specified and directed.

S & F Metallic braded Ruber Hose 20 mm dia of length 45 cm complete all as specified and directed.

S&F Sheet metal encloser SPN with two pin earth plug and socket complete with one SP MCB 20 Amp 240 V including dismentling old one complete all as specified and directed. Make : ABB/L&T/Legrand or equivalent as listed in list of make).

Supply and fixing limit switch 10 Amps, 500 VAC 0.8A, 250 VDC with 1 NO + 1 NC including taking out old one complete all as specified and directed. (Make : Essen or equivalent as listed in list of make)

Dismantling Steam Boiler for overhauling and taking out of all electrical connection and steam line, lifting up steam coil by chain pulley system with other spare parts for inspection and discalling of boiler coil innertube by cleaning agent and decorbonise the same for proper passing of steam and overhauling of waterpump, fuel pump and replace the unserviceable spares including steam Gasket/Asbestose rope/Grasse/engine oil and connection complete for smooth running complete all as specified and directed. (Note : Spares required will be measured under respective item here in below as supply only).

Supply only the following spares for Boiler machine RXA-06/Water Pump /Softener/ Fuel Pump including removing unserviceable old one complete all as specified and directed.

Gland washer for water pump.

Valve set assembly for water pump.

Teflon washer (set of three) for pump.

Oil seal for fuel pump

Oil ring for fuel pump/water pump.

Packing retainer for pump/Boiler

High pressure Metallic braded rubber hose 1/2" x 1 mtr long.

Pressure switch for steam boiler with necessary brass fittings/copper wire for connection as per existing Make. - Pressostat/Indfoss.

Pressure gauge 0-10/0-25/0-42(l) Pre Kg , 63mm dia 1/2 " BSP (Make: APEX/KI/ or equivalent as listed in list of make) with adopter.

Dial thermometer 0-400 deg celcius /0-600 deg celcius, 100 mm dial 1/2" BSP back connection. (Make: Appex or equivalent as listed in list of make).

Dial Thermometer 0-120 Deg.C. 63mm dia 1/2" BSP (Make: APPEX/or equivalent as listed in list of make) With stem.

Filter element for Y type strainer made of Brass net

Taking down motor 5 HP 415 volts after disconnecting all electrical connection nut, bolts from base plate and transportation to repair workshop and dismantling the motor stator, removing worn out copper winding, cleaning the stator and rewinding the same with super enamelled copper wire of existing size and specification and vernish the same with antimoisture heat resistance including varnishing and drying up slowly and including replacement of all types insulating tape, terminal plate, cable socket etc and reassembling the same, transporting to site for refixing in existing position for smooth running complete all as specified and directed.

All as per item No. 37.00 here-in-before but capacity 3.0 HP capacity motor complete

All as per item No. 37.00 here-in-before but capacity 2.00 HP.capacity motor complete

All as per item No. 37.00 here-in-before but capacity 1.00 HP.capacity motor complete

Supply and fixing moulded case circuit breaker FP 440 volts 50Hz 100 A with breaking capacity 25 KA ICU O/L & S/C protection including dismantling old one complete all as specified and directed. (Make - Legrand cat-420055/Hager Cat no HHA101U/C&S/Schneider or equivalent as listed in list of make)

All as per item No 48.00 here-in-before but 300 amps breaking capacity 36 KA ICU O/L & S/C protection including dismantling old onecomplete all as specified and directed. (Make - Legrand cat-420218 /Hager/ C&S/Schneider or equivalent as listed in list of make)

Dismantling/removing of ID/FD fan motor after disconnecting all electrical connection, nut /bolts etc from its base, stripping out the motor and blower for repair/overhauling including varnish, greasing after servicing the motor winding, cleaning the rotor stator and reassembling the same and refixing it for smooth running complete all as specified and directed..

S&F Solenoid valve 5/2 way, 220 V, AC 12/15 watt, pressure 2-10 Kg/Sqcm media - Air, 1/4" BSP connectin complete all as specified and directed. (Make: Airchamp or equivalent as listed in list of make).

S & F FRL combination type ARC-2000, PT - 1/2" max.pressure range 0.5 - 8.5 Kg f/cm square temperature range 5 - 60 degree celcius with brass nut for connection complete all as specified and directed. (Make: SMSN/Airchamp or equivalent as listed in list of make).

S&F panel indicator lamp LED type including taking out old one any type complete all as specified and directed.

S&F PVC insulated three core copper flexible wire of size 2.50 sqmm 1100 volts grade including taking out old one complete all as specified and directed.

S&F heating coil round type with porcelain bit cover of length 1.0 mtr 1500 watt 220 V with necessary connection, brass nut bolts complete all as specified and directed.

S&F roller bearing No. UC-213/208 with bearing bush, block nut, bolts washer complete after taking out old one complete all as specified and directed.

S&F timer motorised auto reverse with synchronous motor type ME-7991, 220 volt 50 Hz, 3 W speed including taking out old one complete all as specified and directed.

S&F MCB SP of capacity 6 - 32 amps 'C' series breaking capacity 10KA including necessary cable socket plug etc after taking out old one complete all as specified and directed. (Make - Legrand/ABB or equivalent as listed in list of make).

S&F MCB TPN of capacity 16 - 25 amps 'C' series breaking capacity 10KA including necessary cable socket lugs etc after taking out old one complete all as specified and directed. (Make - Legrand/ABB or equivalent as listed in list of make)

S&F MCB TPN of capacity 40 amps 'C' series breaking capacity 10KA including necessary cable socket lugs etc after taking out old one complete all as specified and directed. (Make - Legrand/ABB or equivalent as listed in list of make)

S&F PVC flexible pipe 25 mm dia for cable protection including necessary clamps, screw etc.complete all as specified and directed.

supply and replace GI pipe size 15mm dia Medium grade with all fittings complete all as specified and directed.

supply and replace GI pipe size 25mm dia Medium grade with all fittings complete all as specified and directed.

S & F Toggle switch 10/15 Amp ON/OFF/ON after taking out old one complete all as specified and directed.

M&L for repair to pipe joints/flange joints machinery body welding with necessary fittings/packing by bronze stick with gas /electric welding set including lathe job if any required to proper shape & finish complete all as specified and directed.

S&F single core copper flexible wire of size 2.5 sqmm including necessary cable socket, gland etc after taking out old one complete all as specified and directed.

Scrapping old paint and removal all rust with wire brush including welding wherever required and applying one coat of red oxide on bottom of boiler chimney and applying two coat of heat resistance aluminium paint (Ist grade) upto the top of the chimney including inside portion of plant room complete all as specified and directed..

Dismantling all connection of oil service tank and drain out used residue sludge oil, cleaning all dirty foreign materials and scraping old paint and removal all rust with wire brush and apply two coat of synthetic enamel paint over a coat of red oxide, primer and re-connection of all lines complete all as specified and directed..

Painting to the DG Set of 160/180/200/250 KVA capacities by applying Ist grade of synthetic enamelled spray paint of approved make, brand and colours including fuel tank foundation base and panel board and cleaning & removing of existing rust grease oil spot etc and preparation of surfaces complete all as specified and directed..

All as per item No. 71.00 here-in-before but 50/62.5/63/75/82.5/100/110 KVA capacities.

All as per item No. 71.00 here-in-before but 7.5/10/12/15/30/31.25/35/40 KVA capacities.

Dismantling PT pump assy from 75/82.5/100/110/160/180/200/250 KVA DG set any make engine for repair, cleaning, service/ overhauling of pump assy with necessary calibration including replacement of spares as required complete all as specified and directed.(Note:-spares which are required to replace shall be measured and paid separately).

Dismantling PT pump assy from 7.5/10/12/15/30/31.25/35/40/50/62.5 KVA DG set any make engine for repair, cleaning, service/ overhauling of pump assy with necessary calibration including replacement of spares as required complete all as specified and directed.(Note:-spares which are required to replace shall be measured and paid separately).

Supply only the following Parts for incorporated to the ireapir of PT pump assembly complete all as specified and directed.

Part No. 3239599 valve solenoid

Part No. KIT BM-68356 kit Gasket Governer set

Part No. 102974 hub spline coupling

Part No. AR-41043 Weight carrier

Part No. 3034243 pump Gear fuel

Part No. BM - 28848 drive Tachometer

Part No. 3170813 Screw, socket set.

Part No. 203850 Union Male

Part No. 100192 Shaft fuel pump Drive.

Part No. 104087 Shaft tacho meter Drive.

Part No. BM-75531 Drive Governer.

Part No. 146483 Screen filter

Part No. 68174 Key square.

Part No. 3879347 Governer barrel

Part No. S-1650 Bearing ball

Part No. 3010937 Seal 'O' ring.

Part No. 70723 Bushing Tacho meter drive.

Part No. 101981 Gear tacho meter Drive.

Part No. 3030970 Disc Valve.

Part No. 104747 Plunzer Fuel Control.

Part No. BM-30680 Shaft throttle

Supply only lubricating oil grade 20W40 (Make - HP/Servo/Castrol or equivalent as listed in list of make)

Supply only anti freeze radiator coolant (Make-HP/Servo/Castrol or equivalent as listed in list of make)

M&L for cleaning the fuel tank both internally and externally by removing all the dust / sediments etc including writing of tank capacity, Date of cleaning, and next due date for tank to be cleaning for various capacities of DG Set complete all as specified and directed.

Taking out self starter 12/24 volt from the DG Set, transportation to workshop opening/disconnecting all internal connection, cleaning the same taking out burnt armature, segrigation of serviceable parts for re-use, rewinding of armature with copper wire of existing size. Reassembling the same with replacement of of carbon brush 01 set, Beadex pinion 01 no, Half clutch assy 01 No, Field coil 01 No, solonoid switch 01 No commitator 01 nos and refixing the self starter on the engine at site and testing on completion complete all as specified and directed.

Taking down the unserviceable radiator for 75/82.5/100/110/160/180/200/250 KVA from engine, transportation to the workshop dismantling the radiator, repair the tank /storage portion incl necessary welding & making leak proof of the tank, cleaning the complete radiator with chemical agent and pumping set incl replacement of defective copper core and assembling the radiator including replacement of all old rusted MS nuts, bolts washers & gasket sets including refixing in to the existing position & on the engine and testing complete all as specified and directed.

Taking down the unserviceable radiator for 7.5/10/12/15/30/31.25/35/40/50/62.5 KVA from engine, transportation to the workshop dismantling the radiator, repair the tank /storage portion incl necessary welding & making leak proof of the tank, cleaning the complete radiator with chemical agent and pumping set incl replacement of defective copper core and assembling the radiator including replacement of all old rusted MS nuts, bolts washers & gasket sets including refixing in to the existing position & on the engine and testing complete all as specified and directed..

Taking out exhaust silencer box and pipe from the DG set further dismantling the same. Decarbonising and cleaning the silencer box including replacement of nut, bolts, washers clamp/bracket and refixing. Rewinding with asbestos rope and powder (NOTE :- Asbestos rope and powder will be measured and paid separetely under respective items) complete all as specified and directed.

Inspection finding out defects of Fully Automatic Electric panel of DG set and Taking out burnt interconnection wiring including u/s and serviceable components for reuse including Rewiring of panel using existing size of copper cable, ferrule, lugs, insulating material, nut bolt washer of various sizes refixing serviceable items testing complete all specified and directed. (NOTE :- Spares required will be measured under separate item here in after)

Supply only Contactor 3-Pole Type MNX 50 Coil 240V 50 Hz/288V 60 Hz (Cat No CS97075BOOO make: L&T or equivalent as listed in list of make) complete all specified and directed.

Supply only Contactor 4-Pole Type MCX 22/32 AC 1:100/160 A, Coil 240V 50 Hz complete all as specified and directed.(Cat No CS97017BOOO make: L&T or equivalent as listed in list of make)

Supply only Copper Lugs of any size complete all as specified and directed.

Inspection and finding out defects of 160/180/200/250 KVA Kirloskar/Crompton Greaves Electric Alternator including taking out burnt AVR,Glass Fuse and Diode and Supply and fixing Automatic Voltage Regulator Model. IEVR-2 Make KEL, Qnty.01, Diode as per existing size & capacity Qnty.06, Glass Fuse 2amps, Qnty.01 incuding wiring and and testing complete of DG Set complete all as specified and directed.

All as above item no 90.00 here-in-before but 30/40/50/63/75/82.5/100/110 KVA

Disconnecting negative and positive terminal from Self Starter of DG Set and lead acid power unit 25 plate, 180 AH, Heavy Duty, taking out and further trasportation to work shop and back for repair.Inspection finding out defects, carefully dismentaling the power unit taking out serviceable and unserviceable components, keeping aside serviceable items for reuse. Repair/replacement of Grid plate, Positive/Negative plates and Cell Connection, Microporus Separator, Positive/Negative pole with Electrolyte sealing ring complete refixing with servicable items sealing the top with compound and testing complete all as specified and directed.

All as per item no. 92.00 here in before but 60 AH to 100 AH KVA DG Set.

Taking out burnt rectifier assy from alternator of 160/180/200/250 KVA DG Set and supply and fixing rectfier assembly (set of three) including cleaning of existing winding of alternator and testing complete all as directed.

All as above item no 94.00 here-in-before but 75/82.5/100/110 KVA capacity

S&F EMS ( Energy Management System) Contoller suitable for 160 KVA to 250 KVA DG Set after taking out old one complete all as specified and directed.

S&F EMS ( Energy Management System) Contoller suitable for 75 KVA to 110 KVA DG Set after taking out old one complete all as specified and directed.

S&F EMS ( Energy Management System) Contoller suitable for 15 KVA to 63.5 KVA DG Set after taking out old one complete all as specified and directed.

Taking out of u/s carbon bush and carbon holder and alternator incl supply and fixing new carbon bush and holder cleaning & repairs to alternator for smooth functioning of slipring assembly of 160/180/200/250 KVA capacity complete all as specified and directed.

All as per item no. 99.00 here in before but 50/62.5/63/75/82.5/100/110 KVA DG Set.

Inspection of DG set 160/180/200/250 KVA finding out defects, draining of oil dismantling and taking out cylinder head, CR bearing, fule line, rocker, piston, ring, liner, radiator, Turbo, manifold, CR rod, cooling system, controls etc. Inspection segregating u/s component and serviceable components for re-use further repair /re-conditioning /cleaning/ machining lathe work, resurfacing, re-assembling and re-fixing the same with new and repaired component, setting, adjustment and filling of oil, commissioning and testing (NOTE :- Spares and lub oil will be measured under separate items here-in-after) complete all specified and directed.

All as per item no. 101.00 here in before but 50/62.5/63/75/82.5/100/110 KVA DG Set.

All as per item no. 101.00 here in before but 7.5/10/12/15/30/31.25/35/40 KVA DG Set.

Taking out cylinder head assy of 100/110/160/180/250 KVA DG Set transportation to Siliguri workshop for repair and back, further dismantling and taking out u/s valves, valve seat, guide, sleeve etc cleaning, machinery, lathe work, boring, resurfacing and fixing new parts testing (NOTE :- Spares required will be measured under separate items here-in-after) complete all specified and directed.

Dismantling of injector assembly of 75/82.5/100/110/160/180/200/250 KVA of any Make - DG Set for repair, cleaning and overhauling of the same with necessary calibration including replacement of necessary repair as required sent at Kolkata and back(NOTE :- spares required will be measured under separate item) complete all specified and directed.

Supply only Part No. 3880781 kit Injector repair for incorporated to the injector assy complete all as specified and directed.

Dismantling of injector assembly of 7.5/10/12/15/30/31.25/35/40/50/62.5 KVA of any Make - DG Set for repair, cleaning and overhauling of the same with necessary calibration including replacement of necessary repair as required sent at Kolkata and back complete all as specified and directed.(NOTE :- spares required will be measured under separate item)

Supply only Part No. 3880781 kit Injector repair for incorporated to the injector assy complete all as specified and directed.

Inspection of 200 KVA to 250 KVA any make DG Set at finding out defects, cleaning dismantling repair/reconditioning including, draining lube oil and refiling with new lub oil replacement of Oil Filter, Diesel Filter, Air Cleaner Filter, adjusting valve tappet clearence/timing, injector pressure test cleaning and repairing,tightining fasteners and making lubrication leak proof,repair/rewiring of broken/damaged control panel connection including measuring instruments, indicators,engine protection devices etc. reservicing of the complete DG set testing complete all specified and directed. (NOTE :- Spares/Lube Oil required will be measured under separate item here in after).

All as per item no. 109.00 here in before but 160 KVA to 180 KVA DG Set.

All as per item no. 109.00 here in before but 75 KVA to 110 KVA DG Set.

All as per item No. 109.00 here in before but 50 KVA to 63 KVA DG Set.

All as per item no. 109.00 here in before but 30 KVA to 45 KVA DG Set

All as per item no. 109.00 here in before but 15 KVA to 20 KVA DG Set.

Supply only the following Parts for incorporated to the items No. 109.00 to 114.00 and Make - Cummins or equivalent as listed in list of make) complete all as specified and directed.

Part No. 70855 Connector female.

Part No. 108692 Gasket Valve cover.

Part No. 114753 Gasket turbo to Exhaust manifold

Part No. 200817 Gasket Fuel pump & copr.

Part No. 3801096 Kit Turbo repair

Asbestos rope.

Asbestos powder.

Part No. AK-4030 MS hose flexible

Part No. 63495 hose plain

Part No. 43828 D clamp for hose.

Part No. AK-6065ST hose flexible

Part No. BM-30075 Conn. Fuel drain.

Part No. 104536 Seal ferrule

Part No. 503010 Element air cleaner.

Part No. 3020943 Gasket exhaust mainfold.

Part No. 194504Switch Pressure saftey control (LOP)

Part No. 194505 Switch temperature safety control.

Part No. 3166497 Pump Water

Part No. 9097 Gasket WP.

Part No. 500188 Hour meter cable Cable flexible Drive.

Part No. 500412 Temperature Guage

Part No. AK-6054 ST Hose turbo supply Flexible

Part No. 3030790 Hump hose.

Part No. 178627 Belt V Fan.

Part No. 64998-H Hose Plain CR.

Part No. 501151 Hour meter.

Part No. 3026556 Thrust washer bearing.

Part No. 106339 Oil Seal Assyy drive.

Part No. Kit 3238529 "B" Check Kit NT495

Part No.135675 Thermostate

Part No. 102229 Gasket Thermostat housing.

Part No. 128067 Spacer bearing.

Part No.3007241 Seal 'O' ring piston cooling .

Part No.Kit 3238528 'B' Check kit NT/NTA.743

Part No. AK-6045-ST By Pass Hose Flexible.

Part No. AK-6072SS hose flexible.

Part No. 123716 Crank case Element Breather.

Part No. Kit 3238523 "B" Check Kit N495

Part No. 194505 Water Control Safety (HWT).

Part No. AK16019 Hose.

Part No. 500109 Gauge Pressure.

Part No. 503473 Cable Flexible Drive.

Part No. 125658 Retainer 'O' ring.

Part No. 133190 Gasket.

WP kit.

Part No. 669121A Fan adjusting bolt.

Part No. 500108M Water Temp Gauge

Part No. 500109 Pressure Gauge

Part No. 64998G CR hose.

Part No. AK 160236 MS hose.

Part No. 504975 Starting switch.

Part No. 68138 Adoptor vent hose.

Part No. 505062 Hose coolant.

AK 10070 MS hose fuel tank.

Part No. AK 8065 MS hose injector return.

Part No. AK 10015 MS Hose fuel filter.

Part No. BM50745 Head Gasket set

Part No. BM98224 Cylinder Liner with 'O' ring set

KIT4105149 Piston and ring set.

Part No. 203660 Connecting rod bearing of various sizes.

Part No. 187420 Connecting rod bush.

Part N o. 150288 Valve inlet

Part No. 144911 Valve exhaust

Part No. 66890 Valve guide

Part No. 69965 Valve seat

Part No. 89012 Sleeve Injector.

Part No. 3099083 Gasket oil chamber

B Check Kit for 250 KVA DG Greaves Cotton DG Set

Part No. 3012538 Injector cup

B Check Kit for 82.5 KVA DG Set Greaves Cotton

Supply and fixing Battery terminal cable , copper conductor multi strand, unsheathed, single core 25sqmm, 1.5 mtr long each for negative and positive terminal fixed/solder with battery terminal clamp and copper lugs each side of cable sitable for 180 AH Battery (Set of 2 nos.) complete all as specified and directed.

Taking out turbocharger from the DG set 75/82.5/100/110/160/180/200/250 KVA, transportation to work shop for repair, including dismantling the same cleaning and carrying out inspection of each components/spares segrigation of serviceable spares for reuse including Decarbonising machine, cutting, grinding polishing etc and re-assembling the Turbocharger with replacement of spare parts and refixing on existing position complete all as specified and directed (NOTE :- Spares required will be measured and paid separately under respective items).

Fabrication,Supply and Installation of glow sign board size 2.5' x 2.0' made out of ACP (Aluminium composite panel) sheet of 4mm thick vinal sticker, reflecting sticker sheet (deep navy blue), letter of size not less than15cm with bracket around the ACP panel Sheet of Stainless Steel pipe size 15mm dia and 2 Nos vertical post made of Stainless steel of dia not less than 50mm and length not less than 2.5 mtr from bottom glow sin board, including excavation for post holes in soft/loose soil, PCC type B-2 (1:2:4) for post holes including taking down u/s one complete all as specified and directed. . Matters with size and logo of each sign board will be decided by Accepting Officer at the time execution.

Fabrication, Supply and Installation of 3D LED sign boards fabricated out of 3mm thick blue coloured acrylic sheet and base 4mm ACP sheet (out door, with IP-65) for gates of MES Installation with timer (on each board) of L & T equivalent . ACP sheet fitted on double frame fabricated out of 32mm X 32mm MS Square pipe, having 3” depth. All five sides of frame covered with ACP Sheet and back side covered with 26 guage GI sheet. Acrylic letters fabricated out of 3mm thick acrylic A Grade/imported sheet, having minimum 2” depth. Text matter alphabets raised 2 ½” . LED modules of Resang/ powered by Samsung or equivalent make with IP-65 grade to eliminate the letter to the satisfaction of Engineer In-charge. Power supplies/drivers must be IP-65 of Brylite/Hi sign/ Neon Pro make or equivalent including taking down u/s one.Matters with size and logo of each sign board will be decided by Accepting Officer at the time execution complete all as specified and directed.

Fabrication, supply, installation and commissioning of required supporting MS structure, wherever needed, using MS angle, sheet, C channel with complete nut bolts and required materials and scaffolding complete aii as specified and directed.

M&L for 80mm bore steel water tubing medium grade galvanised with new fitting erected in trenches for 3D LED sign boards complete including taking down u/s one all as specified and as directed.

S & F in replacement LED post top lantern 25 Watt , 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete with all accessories including taking down u/s one as specified and as directed. (Make:havells/philips/CG/HPL or equivalent as listed in list of make)..

S & F in replacement MCCB, 4P, 415 Volt AC, 320 Amp, 36 KVA breaking capacity, thermal magnetic O/L & S/C protection , Ics=100% Icu complete including taking down u/s one all as specified and directed.

S & F in replacement MCCB, 4P, 415 Volt AC, 400 Amp, 36 KVA breaking capacity, thermal magnetic O/L & S/C protection , Ics=100% Icu complete including taking down u/s one all as specified and directed.

Supply and fix in replacement junction box made out of polycarbonate with IP 55/IP 65 protection of suitable size including - 04 Nos cable terminal, 02 Nos polycarbonate cable gland , 01 Nos DIN rail and 01 No. MCB SP, 10 KA 6 Amps including taking down u/s one complete all as specified and directed.

S & F in replacement LED post top lantern 40 Watt , 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete with all accessories including taking down u/s one complete all as specified and directed..make:havells/philips/CG/HPL.

S&F in replacement Led bollard light fittings, IP-65 protection, 10W with complete fittings. (For landscap lighting) complete all as specified and directed.

S & F in replacement MCB Four pole, 415 volts, 40-63 Amps, breaking capacity 10KA complete including taking down u/s one complete all as specified and directed. (Make:Legrand/ABB/C&S/schneider or equivalent as listed in list of make).

S & F in replacement MCB 'C' series Double pole 6 to 32 Amps, breaking capacity 10KA, complete including taking down u/s one complete all as specified and directed. (Make:Legrand/ABB/C&S/schneider or equivalent as listed in list of make).

S & F in replacement MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA. complete including taking down u/s one complete all as specified and directed. (Make:Legrand/ABB/C&S/schneider or equivalent as listed in list of make).

S & F LED in replacement SPOT light with spike 15 watt cool day/Warm White colour Long life with 30000 burning hours with CRI >80. W in 4000K.type complete including taking down u/s one complete all as specified and directed.

S & F in replacement flexible wire copper conductor 2 core copper size 1.5 sqmm.complete including taking down u/s one complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for cable trenches and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

Material and labour for sand cushioning for protection of underground cable, consolidated and compacted with clean dry sand complete all as specified and directed.

Material and labour well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and as directed.

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

Taking out Old un-serviceable / faulty cable of any size from trench / pole complete all as specified and directed.

M & L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 16 Sqmm 2 core laid in trench/pole/on wall completer all as specified and as directed. (Make:polycab/finolex/KEI or equivalent as listed in list of make)..

M & L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 6 Sqmm 2 core laid in trench/pole/on wall completer all as specified and as directed. (Make:polycab/finolex/KEI or equivalent as listed in list of make).

M & L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 16 Sqmm 4 core laid in trench/pole/on wall completer all as specified and as directed. (Make:polycab/finolex/KEI or equivalent as listed in list of make).

S & F in replacement 1100 Volts grade heavy duty cable PVC insulated copper stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection twin core 2.5 Sqmm cable flate or Circular industrial cable weather proof complete all as specified and as diercted. (Make:polycab/finolex/plaza or equivalent as listed in list of make).

Materials and labour for Earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below normal ground level with top edge of the plate not less than 1.50 mtr below normal ground level connected to galvanised lead lead wire 4.0 mm dia by means of bolts, nuts and washers and check nuts of galvanised iron or steel GI earth strip protected by 40 mm medium grade galvanised iron pipe including of 20 mm dia medium grade GI water tubing sheet metal 4mm wire mash funnel, charcoal or coke and common salt in paint and testing on completion as shown on electrical plate No.5 ofm SSR Part-I. including taking out unserviceable one, all as specified and as directed.

Supply & Fix in replacement LED Aviation light Die-cast aluminum housing with Red polycarbonate dome for better illumination. Integral driver IP-65 complete icluding taking down u/s one complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 44,700.55 (refer Tender Srl Page No 44). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S R. K. INDUSTRIES

SARKAR ENGINEERING CO.

M/S K M CONSTRUCTION

M/S KAR CONSTRUCTION

M/S UTTAM ENTERPRISES

M/S BENGAL ENGINEERING ENTERPRISES

MESSERS BEE GEE CONSTRUCTION