SPL REPAIRS TO ROAD AND ROAD FURNITURE AT MIL STN DIPATOLI UNDER GE DIPATOLI

Amount

M&L for premixed bituminous macadam with 4% of binder content by weight of total mix using paving bitumen VG-30 grade spread with self propelling mechanical paver machine rolled and compacted to required gradient and camber using 8 to 10 tonne power roller (consolidated thickness 75 mm or less) to make good the cut edges of roads etc complete all as directed.

M & L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broom and finally fanning the cleared surface with air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with paving bitumen primer VG-10 grade at the rate of 5 Kg per 10 Sqm complete all as directed.

M&L Bituminous premixed semi dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder content (VG-30) by weight of total mix prepared in hot mix plant and spread with mechanical paver machine and rolled to required camber and gradient complete all as directed.

Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick painting centre line, arrow, dashes, letters etc not exc 10 cm wide on roads pavement with hot applied thermoplastic roads marking paint of approved colour confirming to BS 3262-1989 with special applicator machine as per manufacturers instruction complete all as directed.

S&F road stud reflective type of metal body alloy with PAMA strip lens reflector with MS stud of suitable size fixed with adhesive as per manufacturer’s instructions complete all as directed. Make: Model No DA-972 of Dark Eye or equivalent of 3M/Sun Eyez/ M/s Texla Plastic & Metal Pvt Ltd / M/s Automat Road Safety Pvt Ltd.

S&F Solar road stud made of aluminium alloy , 100% water proof with high efficiency mono crystalling solar panel 2.4 V/ 0.30 watt , one Ni-Mh or Ni-Cd rechargable battery (1.2v/1600MA), six super bright LEDs with 10000 to 18000 mcd, bearing weight of 10 tonnes (appx) fixed as per manufacturer's instructions complete all as directed. Make : Model DHRUV of Dark Eye or equivalent of 3M/ Sun Eyez/ M/s Texla Plastic & Metal Pvt Ltd/ M/s Automat Road Safety Pvt Ltd.

Supply and fixing for crystalline Silicon Solar delineator of size 160mm long x 92mm dia with battery capacity 1.2V 1500mAH Ni-MH/Ni-cd rechargeable and charging time 4hrs @ sun light with working time 12hrs @ night time fixed with MS pipe (Medium grade) powder coated 400mm long and embedded 200mm below ground level including excavation and PCC M-15 (Nominal Mix) using 20mm graded stone aggregate in foundation of size 300mmx300mmx300mm and making good surface with coping even and smooth and painted with synthetic enamel paint, colour complete all as directed. Make : Dark Eye or equivalent of 3M/ Sun Eyez/ M/s Texla Plastic & Metal Pvt Ltd/ M/s Automat Road Safety Pvt Ltd.

Supply and fix ABS plastic body speed breaker for road safety spike barrier typically fixed using steel spike or teeth that are concealed beneath to road surface with robust material to withstand weight and impact and activated the spikes or teeth of the barrier rise from the ground, effectively creating an impenetrable barrier for any vehicle attempting to pass over it complete all as per manufacture instructions with all safety features complete all as directed. Make : Dark Eye or equivalent of 3M/ Sun Eyez/ M/s Texla Plastic & Metal Pvt Ltd/ M/s Automat Road Safety Pvt Ltd.

M&L preparation of new or previously untreated surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in hard/dense soil complete all as directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams; and similar work; vertical or to batter to rough finished flat surfaces of concrete complete all as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. to rough finished flat surfaces of concrete complete all as directed.

Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as directed.

Supply & fix mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as directed.

M&L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as directed.

Material and Labour for providing pre-cast cement concrete as in cover slabs for manholes and similar items with plain faces in cement concrete 1:2:4 ,type B-1, using 20 mm graded crushed stone aggregate and setting in cement mortar 1:6 including necessary form work complete all as directed.

Material and Labour for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 complete all as directed.

Material and Labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement complete all as directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed.

M&L Preparation of steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Surface excavation n.exc 30Cm deep and averaging 15 Cm deep and getting out in soft loose soil complete all as directed.

S&F 60 mm thick Machine pressed precast concrete colored interlocking paver block any shape and size confirming to IS 15658-2006 , M-35 Grade with grey cement and no pigment complete all as directed.

M&L 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base of floor complete all as directed.

Supply and laying of sand cushioning including spreading, levelling and ramming in layers n.exc. 25 mm thick in each layer complete all as directed.

Demolition of reinforced cement concrete of any description and n any position not otherwise described complete all as directed.

Modernage Constructions Pvt. Ltd. (BID ID -3224544)

M/S SURYA BUILDERS (BID ID -3228745)

M/s Deepak kumar sinha (BID ID -3234717)

M/S Hind Constructions (BID ID -3229363)