8848/E8

Amount

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed.

M&L rendering 10mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & fair without using extra cement complete all as specified and directed

M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling/ chajja, etc. finishing Plastered Surfaces Even and fair without using Extra Cement. complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar on fair faces of brick work or concrete surface of wall in two layer, first layer 10 mm thick in cement morter (1:4) and top layer 5 mm thick in cement morter (1:4) using water proofing compound and finishing the surface even and fair without using extra cement complete all as specified and as directed. . (NOTE:-WPC shall be measured and paid separately)

Supply only liquid water proofing compound (ISI marked) complete all as specified and directed.

M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of White Wash (any colour/ tint) complete all as specified and as directed.

M&L Preparing old decorated Plaster Surfaces of Ceiling and applying One Coat of White Wash, complete all as specified and as directed.

M&L Preparing new Surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed.

M&L preparing new Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of oil bound (any colour /tint) complete all as specified and as directed.

M&L Preparing old decorated Plaster Surfaces of Ceiling surface and applying One Coat of oil bound (any colour /tint) complete all as specified and as directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer over 1.5 mm thick wall care putty (Birla/Asian) on wall surfaces including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer over 1.5 mm thick wall care putty (Birla/Asian) on ceiling surfaces including rubbing with emmery paper to make ceiling surface smooth and even complete all as specified and directed.

M&L complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer complete all as specified and as directed.

M&L Preparing old decorated plastered surfaces of Walls and applying One Coat of Cement Base Paint upto height of four storied building complete all as specified and as directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of primer upto height of four storied buildingcomplete all as specified and as directed.

M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed.

M&L Preparing old decorated plastered surfaces of Walls and applying One Coats of Exterior Emulsion Paint Weather Coat (any colour /tint) (as per Manufacturer’s instructions), complete all as specified and as directed.

M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Writing letters or figures ( any nos) in white colou over black colour background box of size 30 Cm x 30 Cm ( Block, Roman, Italic or Indian) n.exc 30 Cm height complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cables/foundation of poles and getting out in soft /loose soil complete all as specified and directed by Engr-in-Charge.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.

Supply and laying in trenches, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.

Supply and laying in trenches except bricks obtained from taking out old unserviceable XLPE cable, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge. Note:- old serviceable bricks shall be obtained from taking down item.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25cm complete all as specified and directed by the Engr-in-Charge.

Removing excavated materiasl not exc 50 mtr and depositing where directed at a level next 1.5mtr above the starting point complete all as specified and direced by the Engr-in-Charge

Taking out old U/S LT UG cable of any size and any description including GI pipe of any dia and bricks for cable protection where ever appeared and all as directed by Engineer-in-Charge. Note:- (i) Serviceable bricks obtained shall be stacked properly for re-use. (ii) Excavation and earth work shall be measured and paid separately.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 50 Sqmm 4 core in trench/duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

All as per item No. 29.00 mentioned here-in-before but 35 Sqmm 4 core

All as per item No. 29.00 mentioned here-in-before but 25 Sqmm 4 core

All as per item No. 29.00 mentioned here-in-before but 16 Sqm 4 core

S&F Straight through joint kit heat shrinkable 10 to 50 sqmm 4 core for LT 1100 Volts grade complete with jointing materials and accessories suitable for 3.5/4 core XLPE armoured conductor cable of following sizes including testing of cable after joints all as specified and directed.

All as per item No. 33.00 mentioned here-in-before but 70 sqmm to 95 sqmm 3.5 core

All as per item No. 33.00 mentioned here-in-before but 120 sqmm to 300sqmm 3.5 core

M & L for 25mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation base of poles and other similar locations including demoltion of old PCC/broken PCC complete all as specified and as directed by the Engr-in-Charge.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate with and including all necessary form work including demoltion of old PCC/broken PCC complete all as specified and as directed by the Engr-in-Charge.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping of pole/struts and other similar location etc with and including all necessary form workand plastering including demoltion of old PCC/broken PCC complete all as specified and as directed by the Engr-in-Charge.

Supply and fix PVC cable terminal boxes, outdoor type of size 250mm x200mm x105mm with MCB SP 6 to 32 Amps including all necessary fittings and connection including taking down old unserviceable one complete all as directed by Enginner-in-Charge.

M&L for preparation of old painted surface of steel tubular LT poles 9m/11m long and applying two coats of synthetic enamel paint with black and white or yellow strips 30cm wide each upto 1.5m height from top of PCC foundation block and on remaining surface of steel pole applying one coat of aluminium paint after preparation of old steel surfaces including marking of numbering of poles with synthetic enamel paint white in colour in 80mm high letters over 150mm x 230mm yellow base and applying one coat of cement base paint on PCC pedestal complete all as specified and directed

Material and Labour for repair of LT panels / LT feeder pillar boxes by carrying out checking thoroughly all electrical connection, lugs busbar, voltmeter, ammeter, cable glands, insulator on busbar, and tightening all connections properly with proper size of new nut, bolt, washer as per the site requirement and insulation of busbar with colour code insulation tapes including welding on damage panel and preparation of surfaces internal and external of panels / feeder pillar boxes by cleaning with dry cloth / removal dust particles by using air blower and scratching the old painted surfaces as directed and painting with two coats of synthetic enamel paint over a coat of red oxide primer and rewriting existing letters / numbers as directed and repair the existing PCC basement of the feeder piller box / LT panel as per site requirement or directed including applying one coat of cement base point after preparation of surfaces and testing complete as per direction of Engineer - in - Charge. Note :- Cost of PCC, painting, Nut, bolt, washer etc are deemed to be included in quoted rates".

Supply and drawn into the steel tubular pole, by drilling holes just above the junction box and another holes near street light brackets including inserting PVC insulated stranded copper electric cable of size 2.5 sqmm 2 core & all necessary connetions with junction box and street light fittings, complete all as specified and as directed.

Materials and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed.

Disconnecting and taking out underground cable, including carry out megger testing of dismantle LT cable of length not more than 5mtr and locating the fault and cutting the faulty damaged portion of cable connection with providing new heat shrinkable straight through jointing kit of cable size 25 to 50 Sqmm, 3.5/4 Core, including excavation, returning filling and all connectted materials complete all as specified and directed. Note :- Necessary excavation, sand cushioning, cable cover as bricks etc beyond 5 Mtr should be measured and paid separately.

Supply and fix MCCB 4 pole 100A, 16KA, 415V thermal and magnetic fixed type including making all fixing arrangment, cutting welding of existing panel board as per siter requirement and painting the disturbed part of panel as per the existing colour of the panel and electric connection complete all as directed including taking down old one

Supply and fix MCCB 4 pole 63A, 16KA, 415V thermal and magnetic fixed type including making all fixing arrangment, cutting welding of existing panel board as per siter requirement and painting the disturbed part of panel as per the existing colour of the panel and electric connection complete all as directed including taking down old one

S&F MCCB 4 pole 250A, 36KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour of the panel and electric connection including taking down old one. complete all as specified and directed.

S&F MCCB 4 pole 200A, 36KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour of the panel and electric connection including taking down old one. complete all as specified and directed.

S&F MCCB 4 pole 160A, 36KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe panel and electric connection including taking down old one complete all as specified and directed.

Taking out unserviceable steel poles of any type and any sizes from the site of work complete all as specified and directed.

M & L steel tubular sewaged pole 9 mtr long completed with MS base plate, finial taper plug nut bolts, screws as specified type 410 SP-31 as per relevant IS specifiecation including two coats of aluminimum paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. Note : Earth work/excavation PCC shall be measured and paid seperately.

Materials and Labour Cutting /boreing of existing road / path , hardstandingetc for taking out cable and water pipe to protection with iron cover plate for passing cable,water pipe and making good the disturbed road top surfaces with following cement concrete all type, using of suitable depth and finished with speed breaker complete all as uder directed by Engineer-in-Charge.

Supply and Laying Steel Water Tubing 50mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed.

BHASKAR SUPPLY AGENCY (BID ID -3444728)

R T BUILDERS (BID ID -3444590)