Construction of 33/11 kV, 1.6 MVA substation along with assoicated 33 kV, 11 kV and LT line including 2x100 kVA and 63 kVA, 11/0.43 kV Distribution Transformer near Losami junction between Chizami and Lanye under Phek

Amount

A. Supply of Materials for Construction of 33 KV Lines

GI Steel Tubular Pole SP-45

GI MS Channel 100x50x6mm for top Cross Arm - 2.2 M Long weighing 20.24 kg each

GI M.S Angle 50x50x6x5000 mm each weighing 22.5 Kg (for DP Bracing - 5 nos and SP cross arm bracket 2.5m each - 5 nos) (Galvanised)

33 kV Polymer Disc insulator (70KN)- (DP -30 + 2 Spare)

H/W fittings for Disc insulator (E&S) 70 KN, Tension type

33 KV Polymer Pin insulator alonwith GI Pin (DP-15nos, SP- 15 nos + 2Spare)

ACSR Mink

Tension clamp for ACSR Mink

3 inch C.I earthing pipe each of 3.0 meters conforming to relevant ISS

GI wire 6 SWG for earthing

HT Stay set with Guy Insulator

UPG clamp for Wolf//Raccoon/Hare/Mink conductor

Danger Plate

GI Nuts & Bolts with washer ( Assorted including through bolt)

GI Stay Wire 7/10 SWG

Pole Double Clamp of G.I flat 50x6 mm

HT Guy Insulator (Porcelain)

Aluminium Tap

B. Supply of Materials for Contruction of 1.6 MVA, 33/11 kV SS

Transformers

33/11KV, 1.6 MVA (CU Wound) step down Power Transformer

33/0.4 kVA, 25 kVA Station DT

Structure for 33 kV and 11 kV bay

GI Steel Tubular Pole SP 76 (33KV bay- 4 nos, 11KV bay 6 nos and lighting -2 nos)

GI MS Channel 100x50x6mm for top Cross Arm - 2.2 M Long weighing 20.24 kg each (Galvanised)

GI M.S Angle 50x50x6x5000 mm each weighing 22.5 Kg (Galvanised)

Pole Double Clamp of G.I flat 50x6 mm

GI Nuts & Bolts with washer ( Assorted sizes including through bolt)

Conductor for Bus Bar

ACSR MINK 6/3.66 mm + 1/3.66mm.

33KV Equipments

33KV, 400A, 3-ph, Gang switch (Rocking Type Air Break Isolator) along with support insulators operating mechanism, Base Channel down Pipe, terminal connectors and other accessories complete as per IS : 9921 (Pt. I to IV) or its latest amendment and TS Vol II - for (i) Power Trf and (ii) 33/0.4KV Station Trf

33 KV Drop Out fuse of rated current 100 A/ 200 A/400A, complete with fuse carrier assembly, fuse base & tube and mounting arrangement as per IS:9385 (Part-I to III) as amended from time to time and tech spec Vol-II. (i) Power Trf and (ii) 33/0.4KV Station Trf

Supply of 33kv, single pole, single phase,outdoor type with ratio 400-200A/1-1A, 15 VA burden, class accuracy 0.5 Line CT for metering , The CTs will be complete with bimetallic terminal for connecting ACSR wires, wheather proof - Suitable for Pole Mounting

Supply of outdoor, single pole Potential transformer with voltage ratio(33/√3 kV)/(110V/√3), output 100 VA burden with class accuracy 0.5. The PT should be complete with bimetallic connectors for connecting it to overhead conductor , whether proof second - suitable for pole mounting

11KV Equipment

11KV, 400A, 3-ph, Gang switch (Rocking Type Air Break Isolator) along with support insulators operating mechanism, Base Channel down Pipe, terminal connectors and other accessories complete as per IS : 9921 (Pt. I to IV) or its latest amendment and TS Vol II

11 KV Drop Out fuse of rated current 100 A/ 200A/400A, complete with fuse carrier assembly, fuse base & tube and mounting arrangement as per IS:9385 (Part-I to III) as amended from time to time and tech spec Vol-II.

Supply of 11kv, single pole, single phase,outdoor type with ratio 200-100/1A, 15 VA burden, class accuracy 0.5 Line CT for metering, The CTs will be complete with bimetallic terminal for connecting ACSR wires, whether proof secondary terminal - suitable for Pole Mounting

Supply of outdoor, single pole Potential transformer with voltage ratio(11/√3 kV)/ (110V/√3), output 100 VA burden with class accuracy 0.5. The PT should be complete with bimetallic connectors for connecting it to overhead conductor- suitable for pole mounting.

Lightning Arrestors

Supply of 30kV, 10 kA single pole, class2,station type, heavy duty, Lightning Arrestor complete with suitable bimetallic connectors for ACSR wire connections, parallel groove clamps, weather proof secondary terminals, with-out counter, including all accessories

Supply of 9kV, 10 kA single pole, class 2, station type, heavy duty, Lightning Arrestor complete with suitable bimetallic connectors for ACSR wire connections, parallel groove clamps, weather proof secondary terminals, with-out counter, including all acce

Bus Bar

Insulators & Accessories

33KV Polymer Disc Insulator 70 KN (14 nos of 33 KV bay/bus structure and 6 nos for 33KV incomer/outgoing feeder )

11KV Polymer Disc Insulator 70 KN(15 nos of 11 KV bay/bus structure and 6 nos for 11KV feeders )

33KV Polymer Pin Insulator with GI Pin for 33KV bay

11Kv Pin Insulator with GI Pin for 11KV Bay

H/W fittings for Disc insulator (E&S) 70 KN, Tension type

Tension clamp suiable for ACSR Wolf/ Mink/Weasel etc

UPG clamp for Wolf//Raccoon/Hare/Mink conductor

Metering

AC 3 Phase 4 wires, 1 Amp, CT-PT operated fully static, AMR compatibility with companion standard DLMS protocol, HT tri-vector energy meter of Class-0.5S Accuracy suitable for operation from 110 volt ph -ph or 63.5 V Ph-N with necessary meter cover and box for HT Metering - 1No for 33KV Incomer, 1 Nos for 11KV Outgoing feeders

AC 3 Phase 4 wires, 5 Amp, LT CT operated fully static, AMR compatibility DLMS complaint LT tri-vector energy meter of Class-0.5S Accuracy suitable for operation at LT level with meer cover and box for Metering of Distribution Transformers

LTCT 3 Phase (consisting of 4 nos Cast Resin CT, control cables) enclosed in a metal casing for mounting on pole with input/output lead for lug connections or Buttterfly type for mountable on the LT bushing of the DT Terminals for DT Metering

Earthing and Lightning Protection

Supply of 3.0 mtr 40mm dia GI Pipe Earthing

Supply of Copper Plate Earthing for Transformer Neutral (600x600x3.15)

Supply of Earthing Strip

75X6mm GI Strip

50X10mm GI Strip

50X6mm GI Strip

25X3mm GI Strip

50X6mm Copper Strip

Supply of CT & PT Jnc Box (12 way)

Lightining spike

Down conductor for Lightining spike (25x3mm GI Strip)

LT Distribution Items for Switchyard Lighting & Aux

LT XLPE 3.5 Core Aluminium Conductor 70 Sqmm Power Cable

Copper Tubular Terminal ends/Lugs heavy duty (for DTs only) - 70 Sqmm

Kit Kat for LT Feeder - 100A

C. Supply of Materials for Contruction of 11 KV Lines

GI Steel Tubular Pole SP-35

GI MS Channel 100x50x6mm for top Cross Arm - 2.2 M Long weighing 20.24 kg each

GI Angle 50X50X6x2500mm each weighing 11.25Kg (for guard bracket- 5 Nos and for SP Cross Arm Brackets -5 nos)

GI M.S Angle 50X50X6X5000 mm each weighing 22.5Kg for DP Bracing

11 kV Polymer Disc insulator 70 KN (DP-36Nos + 4 Spare)

H/W fittings for Disc insulator (E&S) 70 KN, Tension type

11 KV polymer pin insulator (DP- 18 No and SP- 15 Nos + 4 Spare)

ASCR "Weasel" conductor

Tension clamp for ACSR Weasel

3 inch C.I earthing pipe each of 3.0 meters conforming to relevant ISS

G. I. wire , 8 SWG for guarding (5.71 Kg per Span)

G. I. wire , 6 SWG for earthing

HT stay set with 11 KV guy insulator

PG clamp, for ACSR Weasel

11kV Danger plate

GI nuts and bolts with GI washer (Assorted)

Barbed wire

G.I Stay wire , 7/10 SWG

Pole clamp of GI flat 50x6 mm size

Sundries

D. Supply of Materials for Contruction of 11/0.4KV, 100 KVA Distribution Transformer

GI Steel tubular pole SP-35

100 KVA, 11/0,4 KV Transformer (CU Wound) floor mounted

GI Channel 100x50x6 mm for X arm, switch D.O. etc. (2.2 Mtrs length weighing 20.24 Kg each))

M.S. Angle 50x50x6 mm for DT LT Bus Bar (2.2 mtr weighing 10 Kg each)

Lightning arrestor, (9KV, 10KA, 1Ph).

11 KV GO air break switch complete 3-ph (heavy duty)

11 KV D.O. fuse with operating rod (heavy duty)

GI Wire 6 SWG (5 mm dia) weighing 19.2 Kg per 100 metre Coil - for Earthing

3 inch C.I Earthing pipe each of 3.0 Metres conforming to relevant ISS.

ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.

11 KV polymer pin insulator complete with GI Pin

11 kV Polymer Disc insulator 70 KN (DP-42Nos, SP-84Nos)

H/W fittings for Disc insulator (E&S) 70 KN, Tension type

Tension clamp for ACSR Weasel

PG Clamp for Weasel

LT XLPE Single Core Aluminium Conductor Power Cable

i). 120 Sqmm (AL) ( DT Terminal to LT Bus)

ii) 95 Sqmm (AL) (for Bus to line 2 CKt)

iii). 70 Sqmm (AL) (for Neutral)

Copper Tubular Terminal ends/Lugs heavy duty (for DTs only)

ii) 120 Sqmm

ii) 95 Sqmm

iii) 70 Sqmm

GI M. S. nuts and bolts with MS washer(Assorted)

Danger plate 11KV - various language

Pole double clamp of G.I flat 50x6 mm

Kit Kat for LT Feeder

i). 140 Amp (for DT protection)

ii) 70 Amp (Feeder protection)

Stay set 19 mm dia 1.6 mts. Length with stay rod, bow,plate

GI Stay Wire7/10 SWG weighing 43.4 Kg per 100 metres Coil (for 11 KV, 33 KV Lines, DTs and S/S)

E. Supply of Materials for Contruction of 11/0.4KV, 63 KVA Distribution Transformer

GI Steel tubular pole SP-35

63 KVA, 11/0,4 KV Transformer (CU Wound) floor mounted

GI Channel 100x50x6 mm for X arm, switch D.O. etc. (2.2 Mtrs length weighing 20.24 Kg each))

M.S. Angle 50x50x6 mm for DT LT Bus Bar (2.2 mtr weighing 10 Kg each)

Lightning arrestor, (9KV, 10KA, 1Ph).

11 KV GO air break switch complete 3-ph (heavy duty)

11 KV D.O. fuse with operating rod (heavy duty)

GI Wire 6 SWG (5 mm dia) weighing 19.2 Kg per 100 metre Coil - for Earthing

3 inch C.I Earthing pipe each of 3.0 Metres conforming to relevant ISS.

ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.

11 KV polymer pin insulator complete with GI Pin

11 kV Polymer Disc insulator 70 KN (DP-42Nos, SP-84Nos)

H/W fittings for Disc insulator (E&S) 70 KN, Tension type

Tension clamp for ACSR Weasel

PG Clamp for Weasel

LT XLPE Single Core Aluminium Conductor Power Cable

i). 95 Sqmm (AL) ( DT Terminal to LT Bus)

ii) 70 Sqmm (AL) (for Bus to line 2 CKt)

iii). 25 Sqmm (AL) (for Neutral)

Copper Tubular Terminal ends/Lugs heavy duty (for DTs only)

ii) 95 Sqmm

ii) 70 Sqmm

iii) 25 Sqmm

GI M. S. nuts and bolts with MS washer(Assorted)

Danger plate 11KV - various language

Pole double clamp of G.I flat 50x6 mm

Kit Kat for LT Feeder

i). 85 Amp (for DT protection)

ii) 63 Amp (Feeder protection)

Stay set 19 mm dia 1.6 mts. Length with stay rod, bow,plate

GI Stay Wire7/10 SWG weighing 43.4 Kg per 100 metres Coil (for 11 KV, 33 KV Lines, DTs and S/S)

F. Supply of Materials for Contruction of LT Lines

GI Steel tubular pole SP-11

GI LT Angle cross arm (40x40x5x1500 mm) wiighing 5.25 Kg each

Pole clamp of G.I flat 50x6 mm

LT Pin Insulator (Porcelain) with G.I Pin

Shackel Insulator (Porcelain)

GI Shackle Straps (D Clamp) with bolts

AAC ANT conductor

GI Nuts & Bolts assorted with washer

LT Stay Set (Galvanised)

LT Guy insulator (porcelain)

GI 7/12 SWG Stay wire for LT stay set

Description of Work / Item(s)

Amount

A. Erection, Installation & Comissioning of Materials for Construction of 33 KV Lines

GI Steel Tubular Pole SP-45

GI MS Channel 100x50x6mm for top Cross Arm - 2.2 M Long weighing 20.24 kg each

GI M.S Angle 50x50x6x5000 mm each weighing 22.5 Kg (for DP Bracing - 5 nos and SP cross arm bracket 2.5m each - 5 nos) (Galvanised)

33 kV Polymer Disc insulator (70KN)- (DP -30 + 2 Spare)

H/W fittings for Disc insulator (E&S) 70 KN, Tension type

33 KV Polymer Pin insulator alonwith GI Pin (DP-15nos, SP- 15 nos + 2Spare)

ACSR Mink

Tension clamp for ACSR Mink

3 inch C.I earthing pipe each of 3.0 meters conforming to relevant ISS

GI wire 6 SWG for earthing

HT Stay set with Guy Insulator

UPG clamp for Wolf//Raccoon/Hare/Mink conductor

Danger Plate

GI Nuts & Bolts with washer ( Assorted including through bolt)

GI Stay Wire 7/10 SWG

Pole Double Clamp of G.I flat 50x6 mm

HT Guy Insulator (Porcelain)

Aluminium Tap

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx3 ft per pole - 0.25Cum)

Job excavation and Grouting of Stay Set with PCC 1:3:6

B. Erection, Installation & Comissioning Materials for Contruction of 1.6 MVA, 33/11 kV SS

Transformer

Erection, testing & commissioning of 33/11KV, 1.6 MVA (CU Wound) step down Power Transformer, meters & metering box, earthing, providing HT & LT interconnections from DP to Power Transformer ,all accessories complete including loading, unloading, providing civil works viz., Foundation & Fencing (excluding the cost of foundation and fencing materials) and including fixing of danger plates

Erection, testing & commissioning of 33/0.4 KVA, 25 KVA Station DT, Distribution Cubicle for 250 kVA DTRs, meters & metering box, earthing, providing HT & LT interconnections from DP to DT & Dist Box ,all accessories complete including loading, unloading, providing civil works viz., Foundation & Fencing (excluding the cost of foundation and fencing materials) and including fixing of danger plates.3Ph 50Hz 33/0.4 KVA, 25 KVA

33KV Equipments

33KV, 400A, 3-ph, Gang switch (Rocking Type Air Break Isolator) along with support insulators operating mechanism, Base Channel down Pipe, terminal connectors and other accessories complete as per IS : 9921 (Pt. I to IV) or its latest amendment and TS Vol II - for (i) Power Trf and (ii) 33/0.4KV Station Trf

33 KV Drop Out fuse of rated current 100 A/ 200 A/400A, complete with fuse carrier assembly, fuse base & tube and mounting arrangement as per IS:9385 (Part-I to III) as amended from time to time and tech spec Vol-II. (i) Power Trf and (ii) 33/0.4KV Station Trf

Supply of 33kv, single pole, single phase,outdoor type with ratio 400-200A/1-1A, 15 VA burden, class accuracy 0.5 Line CT for metering , The CTs will be complete with bimetallic terminal for connecting ACSR wires, wheather proof - Suitable for Pole Mounting

Supply of outdoor, single pole Potential transformer with voltage ratio(33/√3 kV)/(110V/√3), output 100 VA burden with class accuracy 0.5. The PT should be complete with bimetallic connectors for connecting it to overhead conductor , whether proof second - suitable for pole mounting

11KV Equipment

11KV, 400A, 3-ph, Gang switch (Rocking Type Air Break Isolator) along with support insulators operating mechanism, Base Channel down Pipe, terminal connectors and other accessories complete as per IS : 9921 (Pt. I to IV) or its latest amendment and TS Vol II

11 KV Drop Out fuse of rated current 100 A/ 200A/400A, complete with fuse carrier assembly, fuse base & tube and mounting arrangement as per IS:9385 (Part-I to III) as amended from time to time and tech spec Vol-II.

Supply of 11kv, single pole, single phase,outdoor type with ratio 200-100/1A, 15 VA burden, class accuracy 0.5 Line CT for metering, The CTs will be complete with bimetallic terminal for connecting ACSR wires, whether proof secondary terminal - suitable for Pole Mounting

Supply of outdoor, single pole Potential transformer with voltage ratio(11/√3 kV)/ (110V/√3), output 100 VA burden with class accuracy 0.5. The PT should be complete with bimetallic connectors for connecting it to overhead conductor- suitable for pole mounting.

Surge Arrestors

Supply of 30kV, 10 kA single pole, class2,station type, heavy duty, Lightning Arrestor complete with suitable bimetallic connectors for ACSR wire connections, parallel groove clamps, weather proof secondary terminals, with-out counter, including all accessories

Supply of 9kV, 10 kA single pole, class 2, station type, heavy duty, Lightning Arrestor complete with suitable bimetallic connectors for ACSR wire connections, parallel groove clamps, weather proof secondary terminals, with-out counter, including all acce

Metering

AC 3 Phase 4 wires, 1 Amp, CT-PT operated fully static, AMR compatibility with companion standard DLMS protocol, HT tri-vector energy meter of Class-0.5S Accuracy suitable for operation from 110 volt ph -ph or 63.5 V Ph-N with necessary meter cover and box for HT Metering - 1No for 33KV Incomer, 1 Nos for 11KV Outgoing feeders

AC 3 Phase 4 wires, 5 Amp, LT CT operated fully static, AMR compatibility DLMS complaint LT tri-vector energy meter of Class-0.5S Accuracy suitable for operation at LT level with meer cover and box for Metering of Distribution Transformers

LTCT 3 Phase (consisting of 4 nos Cast Resin CT, control cables) enclosed in a metal casing for mounting on pole with input/output lead for lug connections or Buttterfly type for mountable on the LT bushing of the DT Terminals for DT Metering

Earthmat and Lightning Protection

Supply of 3.0 mtr 40mm dia GI Pipe Earthing

Supply of Copper Plate Earthing for Transformer Neutral (600x600x3.15)

Supply of Earthing Strip

75X6mm GI Strip

50X10mm GI Strip

50X6mm GI Strip

25X3mm GI Strip

50X6mm Copper Strip

Supply of CT & PT Jnc Box (12 way)

Lightining spike

Down conductor for Lightining spike (25x3mm GI Strip)

LT Distribution Items for Switchyard Lighting & Aux

LT XLPE 3.5 Core Aluminium Conductor 70 Sqmm Power Cable

Copper Tubular Terminal ends/Lugs heavy duty (for DTs only) - 70 Sqmm

Kit Kat for LT Feeder - 100A

JOB/CIVIL WORKS

Erection of structure for incomer & outgoing bays 4 GI SP 76 Steel Tubular poles for 33 KV & 4 GI SP 76 Steel Tubular Poles for 11 KV complete with GI cross arms channel & angles for equipments supports - Gang switches, DO fuse assbly, cables terminations, stay, station transformers.

Bus Bar Arrangements for 33KV and 11KV complete with ASCR Mink Conductors, Insulators, Jumpers, terminal etc.

Concreting & curing for foundation of columns(Poles), Equipment structure (Poles & Channel), Tranformer Pads etc, incl Erection of of all materials labour and T & P

Drainage System

C. Erection, Installation & Comissioning of Materials for Contruction of 11 KV Lines

GI Steel Tubular Pole SP-35

GI MS Channel 100x50x6mm for top Cross Arm - 2.2 M Long weighing 20.24 kg each

GI Angle 50X50X6x2500mm each weighing 11.25Kg (for guard bracket- 5 Nos and for SP Cross Arm Brackets -5 nos)

GI M.S Angle 50X50X6X5000 mm each weighing 22.5Kg for DP Bracing

11 kV Polymer Disc insulator 70 KN (DP-36Nos + 4 Spare)

H/W fittings for Disc insulator (E&S) 70 KN, Tension type

11 KV polymer pin insulator (DP- 18 No and SP- 15 Nos + 4 Spare)

ASCR "Weasel" conductor

Tension clamp for ACSR Weasel

3 inch C.I earthing pipe each of 3.0 meters conforming to relevant ISS

G. I. wire , 8 SWG for guarding (5.71 Kg per Span)

G. I. wire , 6 SWG for earthing

HT stay set with 11 KV guy insulator

PG clamp, for ACSR Weasel

11kV Danger plate

GI nuts and bolts with GI washer (Assorted)

Barbed wire

G.I Stay wire , 7/10 SWG

Pole clamp of GI flat 50x6 mm size

Sundries

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx3 ft per pole - 0.51Cum)

Job excavation and Grouting of Stay Set with PCC 1:3:6

D. Erection, Installation & Comissioning of Materials for Contruction of 11/0.4KV, 100 KVA Distribution Transformer

GI Steel tubular pole SP-35

100 KVA, 11/0,4 KV Transformer (CU Wound) floor mounted

GI Channel 100x50x6 mm for X arm, switch D.O. etc. (2.2 Mtrs length weighing 20.24 Kg each))

M.S. Angle 50x50x6 mm for DT LT Bus Bar (2.2 mtr weighing 10 Kg each)

Lightning arrestor, (9KV, 10KA, 1Ph).

11 KV GO air break switch complete 3-ph (heavy duty)

11 KV D.O. fuse with operating rod (heavy duty)

GI Wire 6 SWG (5 mm dia) weighing 19.2 Kg per 100 metre Coil - for Earthing

3 inch C.I Earthing pipe each of 3.0 Metres conforming to relevant ISS.

ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.

11 KV polymer pin insulator complete with GI Pin

11 kV Polymer Disc insulator 70 KN (DP-42Nos, SP-84Nos)

H/W fittings for Disc insulator (E&S) 70 KN, Tension type

Tension clamp for ACSR Weasel

PG Clamp for Weasel

LT XLPE Single Core Aluminium Conductor Power Cable

i). 120 Sqmm (AL) ( DT Terminal to LT Bus)

ii) 95 Sqmm (AL) (for Bus to line 2 CKt)

iii). 70 Sqmm (AL) (for Neutral)

Copper Tubular Terminal ends/Lugs heavy duty (for DTs only)

ii) 120 Sqmm

ii) 95 Sqmm

iii) 70 Sqmm

GI M. S. nuts and bolts with MS washer(Assorted)

Danger plate 11KV - various language

Pole double clamp of G.I flat 50x6 mm

Kit Kat for LT Feeder

i). 140 Amp (for DT protection)

ii) 70 Amp (Feeder protection)

Stay set 19 mm dia 1.6 mts. Length with stay rod, bow,plate

GI Stay Wire7/10 SWG weighing 43.4 Kg per 100 metres Coil (for 11 KV, 33 KV Lines, DTs and S/S)

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx3 ft per pole - 0.51Cum)

Job excavation and Grouting of Stay Set with PCC 1:3:6

E. Erection, Installation & Comissioning of Materials for Contruction of 11/0.4KV, 63 KVA Distribution Transformer

GI Steel tubular pole SP-35

63 KVA, 11/0,4 KV Transformer (CU Wound) floor mounted

GI Channel 100x50x6 mm for X arm, switch D.O. etc. (2.2 Mtrs length weighing 20.24 Kg each))

M.S. Angle 50x50x6 mm for DT LT Bus Bar (2.2 mtr weighing 10 Kg each)

Lightning arrestor, (9KV, 10KA, 1Ph).

11 KV GO air break switch complete 3-ph (heavy duty)

11 KV D.O. fuse with operating rod (heavy duty)

GI Wire 6 SWG (5 mm dia) weighing 19.2 Kg per 100 metre Coil - for Earthing

3 inch C.I Earthing pipe each of 3.0 Metres conforming to relevant ISS.

ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.

11 KV polymer pin insulator complete with GI Pin

11 kV Polymer Disc insulator 70 KN (DP-42Nos, SP-84Nos)

H/W fittings for Disc insulator (E&S) 70 KN, Tension type

Tension clamp for ACSR Weasel

PG Clamp for Weasel

LT XLPE Single Core Aluminium Conductor Power Cable

i). 95 Sqmm (AL) ( DT Terminal to LT Bus)

ii) 70 Sqmm (AL) (for Bus to line 2 CKt)

iii). 25 Sqmm (AL) (for Neutral)

Copper Tubular Terminal ends/Lugs heavy duty (for DTs only)

ii) 95 Sqmm

ii) 70 Sqmm

iii) 25 Sqmm

GI M. S. nuts and bolts with MS washer(Assorted)

Danger plate 11KV - various language

Pole double clamp of G.I flat 50x6 mm

Kit Kat for LT Feeder

i). 85 Amp (for DT protection)

ii) 63 Amp (Feeder protection)

Stay set 19 mm dia 1.6 mts. Length with stay rod, bow,plate

GI Stay Wire7/10 SWG weighing 43.4 Kg per 100 metres Coil (for 11 KV, 33 KV Lines, DTs and S/S)

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx3 ft per pole - 0.51Cum)

Job excavation and Grouting of Stay Set with PCC 1:3:6

F. Erection, Installation & Comissioning of Materials for Contruction of LT Lines

GI Steel tubular pole SP-11

GI LT Angle cross arm (40x40x5x1500 mm) wiighing 5.25 Kg each

Pole clamp of G.I flat 50x6 mm

LT Pin Insulator (Porcelain) with G.I Pin

Shackel Insulator (Porcelain)

GI Shackle Straps (D Clamp) with bolts

AAC ANT conductor

GI Nuts & Bolts assorted with washer

LT Stay Set (Galvanised)

LT Guy insulator (porcelain)

GI 7/12 SWG Stay wire for LT stay set

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx3 ft per pole - 0.51Cum)

Job excavation and Grouting of Stay Set with PCC 1:3:6

Description of Work / Item(s)

Amount

Taxes Applicable on Supply and Erection, Dismatling, Installation, Civil works & Commissioning of Materials

Total GST on Supply of Materials (BoQ1)

Total GST on Erection, Installation, Civil works & Commissioning (BoQ2)

Total Labour Cess on Erection, Installation, Civil works & Commissioning (BoQ2)

Description of Work / Item(s)

Amount

TOTAL SCHEDULE NO. 1

Ex-works supply of materials (BoQ1)

TOTAL SCHEDULE NO. 2

Erection, Installation & Commissioning (BoQ2)

TOTAL SCHEDULE NO. 3

Taxes (GST & Labour Cess) (BoQ3)

techno power enterprises private limited (BID ID -3028)

RAUSHEENA UDYOG LIMITED (BID ID -3032)

techno power enterprises private limited (BID ID -3028)

RAUSHEENA UDYOG LIMITED (BID ID -3032)

techno power enterprises private limited (BID ID -3028)

RAUSHEENA UDYOG LIMITED (BID ID -3032)

techno power enterprises private limited (BID ID -3028)

RAUSHEENA UDYOG LIMITED (BID ID -3032)