Construction of developmental work at Kantabanji MMY Bangamunda MY Sindhekela MY Muribahal MY

Dismantling brick or stone masonary in lime or cement mortar under 3mt height including stacking the useful materials for re-use & removing the debris with in 50mt lead etc complte.

Dismantling & removing R.C.C column,beams,slabs, staircase, landing , lintels including stacking the useful materials for reuse & removing the debris with in 50 mt lead.

Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries T & P & all other machineries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Supplying and filling in foundation and plinth with good river sand well watered and rammed in layers not exceeding 23 cm in each layer including all leads and lifts, cost of all materials, labour,cess, sundries, T&P required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Providing and lying plain cement concrete of proportion (1:3:6) in foundation and plinths using approved quality cement , 40 mm. size black hard hand broken granite stone metal and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machineries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Cost, conveyance and labour for spreading stone screened dust and consolidation with PRR including watering, cost and conveyance of stone screen dust etc complete as per specification and direction of Engineer

Earth work in excavation of foundation trenches in hard soil of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries T & P & all other machineries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

R.C.C. work of M 20 (equivalent to nominal mix of proportion (1:1.5:3) having a minimum compressive strength (in work test) of 200 Kg/cm2 in 15 cm. Cubes at 28 days after mixing and test conducted in accordance with IS 456 & 516 using 6mm to 20 mm (1/4” to 3/4") size (18mm not to exceed 25 percent) hard black broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or colour washing providing grooves or beads where necessary cost and conveyance royalties and taxes of all materials and labour required for the work etc. complete with all T & P in all respect but excluding cost of M.S. rods or Tor steel and binding wires of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc. of the M.S. Rod and binding wires and tying the grills and placing in proper position in all floors. Column footing, Base.

Grade beam/Tie beam/Plinth band

Column & Beam (up to 5m. )

Column & Beam (above 5m. )

Lintel (G. F.)

Lintel (F. F.)

Stair case (G.F.)

Stair case (F.F.)

Roof slab (G.F.)

Roof slab (F.F.)

Providing fixing and placing of Tor steel (HYSD FE-500 Make- (SAIL/ JINDAL/ RINL/ SHYAM/ TISCON) for RCC work in all floors of required diameter of approved quality with straightening bent up or coiled rods" Tor rods" cutting, bending, cracking, hooking, welding or jointing(if required) the "Tor steels rods" & binding wire and tying the grills hoisting laying and placing in proper position as required for RCC works for providing if an hooks including cost, conveyance and taxes of Tor steel and binding wire of 18 to 20 gauge and labour with T & P required for the work etc. complete in all respect in all floors (weight of the binding wire will not be considered for payment) complete.

Flyash Brick masonary in Foundation and plinth in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.

Flyash Brick masonary in super structure (up to 3mt height ground floor) in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.

Flyash Brick masonary in super structure above 3mt height 1st floor in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge. Super structure above 3mtr.

Providing and painting 6 mm thick Cement Plaster (1:4) in ground floor (up to 3mt height) over RCC work with curing etc as directed by the Engineer-in-charge.

Providing and painting 6 mm thick Cement Plaster (1:4) in ground floor (above 3mt height) over RCC work with curing etc as directed by the Engineer-in-charge.

Providing and plastering 12 mm thick Cement Plaster (1:6) in ground floor (up to 3mt height) over brick work with curing etc as directed by the Engineer-in-charge.Upto 3 mt height.

Providing and plastering 12 mm thick Cement Plaster (1:6) in ground floor (Above 3mt height) over brick work with curing etc as directed by the Engineer-in-charge.Upto 3 mt height.

Providing and painting 16 mm thick Cement Plaster (1:6) in ground floor (up to 3mt height)over brick/stone work with curing etc as directed by the Engineer-in-charge. Upto 3 mt height.

Providing and painting 16 mm thick Cement Plaster (1:6) in ground floor (above 3mt height)over brick/stone work with curing etc as directed by the Engineer-in-charge. Upto 3 mt height.

Providing and lying plain cement concrete of proportion (1:2:4) using approved quality cement , 20 mm.down graded size black hard crusher broken granite stone chips and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machineries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Painting two coats with distemper over one coat of primer of approved make and finished smooth and even surface including including cost of scaffolding staging charges with cost of all materials, taxes, laboorer T&P etc complete.Up to 3 mt height.

Painting two coats with distemper over one coat of primer of approved make and finished smooth and even surface including including cost of scaffolding staging charges with cost of all materials, taxes, laboorer T&P etc complete. above 3 mt height.

Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Upto 3 mt height. (Ground floor).

Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Upto 3 mt height. (Ground floor).

Supplying, fitting ,fixing of M.S.Grill with shutter in doors/ windows/ventilator /gate etc including all cost of materials, labourer,T & P ,taxes etc complete as directed by the Engineer-in-charge .

Polishing/Painting 2 coats with approved synthetic enamel paint on steel/wood work to give an even shade including cost of all materials,labourer,sundries,T & P etc complete as directed by the Engineer-in-charge

Filling in foundation with muroom well watered & rammed including cost,conveyance,royality & taxes etc. complete to work site.

Filling in foundation &plinth with excavated materials including watering & ramming as directed by the Engineer-in charge .(2/3rd rate of respective item )

Supplying, fitting & fixing of pre-cast concrete ventilators of size 0.38mt. X 0.25mt. including all cost etc complete.

Supplying, fitting & fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC. Ground floor

Supplying, fitting & fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC. First floor

Supplying, fitting & fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC. First floor

Supplying and laying mat finish ceramic floor tiles of approved shade in floors of toilets using premium quality 300mm X 300mm size and 8mm thick tiles having average bending strength 300-350Kg/Sqcm . set in cement mortar of proportion (1:1) and cement slurry to proper line and level including cutting to required size and shape and fixing at corners splays etc. and the joints are to be properly finished with white cement with colouring pigments including washing and cleaning with oxalic acid etc. complete Ground floor

Supplying and laying mat finish ceramic floor tiles of approved shade in floors of toilets using premium quality 300mm X 300mm size and 8mm thick tiles having average bending strength 300-350Kg/Sqcm . set in cement mortar of proportion (1:1) and cement slurry to proper line and level including cutting to required size and shape and fixing at corners splays etc. and the joints are to be properly finished with white cement with colouring pigments including washing and cleaning with oxalic acid etc. complete First floor

Supplying and laying mat finish ceramic wall tiles of approved shade in wall of toilets using premium quality 300mm X 300mm size and 8mm thick tiles having average bending strength 300-350Kg/Sqcm . set in cement mortar of proportion (1:1) and cement slurry to proper line and level including cutting to required size and shape and fixing at corners splays etc. and the joints are to be properly finished with white cement with colouring pigments including washing and cleaning with oxalic acid etc. complete Ground floor.

Supplying and laying mat finish ceramic wall tiles of approved shade in wall of toilets using premium quality 300mm X 300mm size and 8mm thick tiles having average bending strength 300-350Kg/Sqcm . set in cement mortar of proportion (1:1) and cement slurry to proper line and level including cutting to required size and shape and fixing at corners splays etc. and the joints are to be properly finished with white cement with colouring pigments including washing and cleaning with oxalic acid etc. complete First floor.

Providing and fixing of Kodappa tiles size above 0.40sqm (10mm thick) in all cost conveyance etc. complete.

Providing, Fitting & Fixing of Stainless steel of 304 grade in hand railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes connected with stainless steel pipes of diameter 15 mm (2 mm thick) in 3 rows as per approved design and specification including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete for all floors as per specification & direction of the Engineer-in-charge.

Providing, fitting and fixing of MARBLE SLAB (minimum 16mm thick dunguri varity, 0.4sqm to 1.00 sqm) of required size of approved quality & shade laid over 25 mm thick cement mortar of prop. (1:1) to proper slope & level jointed with neat cement slurry with approved colour pigment to match the colour of slab over floor, landing and trade, 3 no.s of cutting, acid washing and polishing, watering, curing, cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete and as per specification & direction of Engineer-in-charge. Note :- Sample of Marble Slabs shall be approved before procurement and use.

Providing, fitting and fixing of MARBLE SLAB (minimum 16mm thick dunguri varity, 0.4sqm to 1.00 sqm) of required size of approved quality & shade laid over 25 mm thick cement mortar of prop. (1:1) to proper slope & level jointed with neat cement slurry with approved colour pigment to match the colour of slab over floor, landing and trade, 3 no.s of cutting, acid washing and polishing, watering, curing, cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete and as per specification & direction of Engineer-in-charge. Note :- Sample of Marble Slabs shall be approved before procurement and use.

Providing average 20mm thick grading plaster with cement mortare (1:4) over top of roof terrace including scraping and cleaning, close chipping if required, the roof surface, laying plastering and finishing smooth to required level and slope including rounding the corners at walls as per the direction of Engineer-in-charge including cost of all materials with taxes, royalties and transportation, sundries, T&P, watering and curing by ponding water over terrace slab up to required period etc. complete for First floors.

Providing average 20mm thick grading plaster with cement mortare (1:4) over top of roof terrace including scraping and cleaning, close chipping if required, the roof surface, laying plastering and finishing smooth to required level and slope including rounding the corners at walls as per the direction of Engineer-in-charge including cost of all materials with taxes, royalties and transportation, sundries, T&P, watering and curing by ponding water over terrace slab up to required period etc. complete for First floors.

Supplying and fixing in position M.S Shutters made out of M.s angle.M.S flat and M.S sheet as per design with one coat of anti-corrosive primer painting

Supplying and fitting fixing of un-plasticised Poly Vinylchloride (UPVC) Ventilator/ with top hung fix -60 series duly manufactured using upvc reinforced profiles of 60 mm x 55mm x 2.5 mm for outer frame .75 mm x 60mm x 2.25 mm for casement window sash profile capable of mounting single glazing system .structurally reinforced with horizontal dip galvanised up to 50 microns of minimum thickness of 1.5 mm pre fabricated nd weided through fusion welding the door sash shall b fitted with 6 mm thick clear toughened glass of SAINT GOBAIN make duly fitted with EPDM weathering seal resistant accessories likeclipping locking system made of alluminiu

32mm thick flush door shutter made out of 32mm BWR block board and covering with 1mm thick sunmica to both side pasted with adhesive including fixing of fixtures like Godrej make Mortice Lock having model No. 9168.Godrej make Door closure having model no. 8340,100mm Aluminium heavy hinges including cost conveyance,taxes of all materials etc.complete as directed by by the Engineer-in-charge.

Dressed seasoned sal wood work framed and fixed W &P in frames of doors & windows chowkaths per 1 cum.

Finishing wall surface of walls with Acylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete.

Finishing wall surface of walls with Acylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete.

Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 60mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern(Post G. S.T)

Cost, supplying ,fitting &fixing of bathroom fibre door of approved make including fibre choukatha all GI fittings all cost ,conveyance taxes etc. complete.

Supply and lying of 20 mm dia non-metalic flexible polythene conduit over existing roof surface including cost of all labour , meterial T & P . Etc. complete or as per the direction of E.I.C.

Supply and fixing of box type G.I fan hook on existing roof surface.

Supplying all material, labour, taxes, T&P for fitting and fixing of CPVC pipes of 100% lead free and confirming to ASTM F 442 specified to CPVC complete. 25 mm dia

20 mm dia

15 mm dia

Supplying all material, labour, taxes, T&P for cutting of grooves in pucca floor and walls for taking GI/CPVC pipes anf fitting and making good to the damages etc complete. For 15mm to 50mm PVC pipe to pass in 250mm thick wall

Supplying all material, labour, taxes, T&P for fitting and fixing of following different water supply fittings conferming to UPVC pipes 100% lead free etc complete. 25mm dia CPVC gate valve

Supplying all material, labour, taxes, T&P for fitting and fixing of white glazed vitreous china porcelain of Orissa pattern water closet 580 X 410 X290 mm of approved make etc complete. Orissa pan open rim 580mm X 410mm

Supplying all material, labour, taxes, T&P for fitting and fixing of white glazed vitreous china ware porcelain wash hand basin complete with all parts and internal fittings of approved make etc complete.

Supplying all material, labour, taxes, T&P for fitting and fixing of 10 ltr capacity PVC low level cistern complete with all parts and internal fittings of approved make etc complete.

Supplying all material, labour, taxes, T&P for fitting and fixing of white glazed vitreous china ware porcelain wash hand basin complete with all parts and internal fittings of approved make etc complete.

Supplying all material, labour, taxes, T&P for fitting and fixing of different water supply NP or CP on brass or GM fixtures of ISI approved make of following sizes and specification etc complete. 15mm dia CP Bib cock with wall flange short body

15mm dia CP Bib cock with wall flange long body

15mm dia CP angle stop cock with wall flange

15mm dia CP pillar cock

CP Soap dish

CP towel rod with bracket

CP towel ring with bracket

15mm dia concealed stop cock

150mm size shower with arm

Supplying all material, labour, taxes, T&P for fitting and fixing of stainless steel or CP fixtures of following size and specification leak proof threaded joints tightened etc complete. 125mm grating

15mm CP expansion piece

Supplying all material, labour, taxes, T&P for fitting and fixing of UPVC SWR pipes and fittings of approved make confirming to IS 13592 both below and the ground level and walls of following size and specification etc complete. 110mm nominal dia

Supplying all material, labour, taxes, T&P for fitting and fixing of UPVC SWR pipes and fittings of approved make and specification etc complete. 110mm dia P- trap

110mm dia single junction with door

110mm dia double junction with door

110mm dia Door bend

110mm dia plain bend

110mm dia terminal guard

110mm dia pipe clamp

110mm dia elbow

75mm dia double junction with door

75mm dia single junction with door

75mm dia elbow

75mm dia Door bend

Supplying all material, labour, taxes, T&P for fitting and fixing of 600mm X 450mm size bevelled edge plate glass mirror of superior glass minimum 5.5 mm thick of approved make mounted with wood or fibre as per specification etc complete.

Supplying all material, labour, taxes, T&P for laying 110mm dia unplasticized UPVC SWR type-A pipes in trenches including jointing with approved sovent cement etc complete.

Supplying all material, labour, taxes, T&P for laying 75mm dia unplasticized UPVC SWR type-A pipes in trenches including jointing with approved sovent cement etc complete.

Supplying all material, labour, taxes, T&P for supplying 1 HP S/S pumpset etc complete

C. Electrification:- Supply and lying of 20 mm dia non-metalic flexible polythene conduit over existing roof surface including cost of all labour , meterial T & P . Etc. complete or as per the direction of E.I.C.

Supply and fixing of box type G.I fan hook on existing roof surface.

Recssed wiring to light , ceiling fan, 5 A convenient wall plug point with 1 sq. mm. PVC insulated 650 volt grade standed copper conductor wire duly colour coded for phase i.e Red, yellow & Blue depending upon phase, neutral (Black) & earth continuity conductor and lop earth to fitting & fixing ( Green) laid through rigid PVC conduit pipe of 2 mm wall thickness cocealed/ surface in the wall/ column/ceiling of the building including supply of all required materials such as flush type switches, flush type plug sockets, sheet metal switch boxes with Bakelite cover, PVC conduit, Properly colour coded wires, junction boxes, point, wiring ternination equipment such as three pin ceiling rose, angle/batten holder etc. as the case may be complete eith making good the damaged caused as required as per direction of Engineer-in Charge (locking , arrangement to switch board are to be supplied as per requirement by E.I.C.) Light point (short)

Light point (Medium)

Light point (Long)

Ceiling fan point

6 AMP plug point on same board

Calling Bell Point

Exhausted Fan Point

Recssed wiring to 15 AMP plug point with 2×4 Sq. mm. FR PVC. Insulated single core multistrand copper conductor of ISI marked with 20 mm dia PVC conduit along with 1×1.5 Sq.mm. FR PVCV insulated single core multistrand copper conductor for loop earthing as required.

Recessed wiring to sub-main with following number & size of PVC insulated 1100 volt grade standard copper conductor wire duly wiring of circuits & sub-main with following number & size of PVC insulated 1100 volt grade standard copper conductor duly coloured coated for phase i.e Red, yellow & Blue depending upon phase, neutral (Black) & earth continuity conductor and lop earth to fitting & fixing ( Green) laid through rigid PVC conduit pipe of 2 mm wall thickness concealed in ceiling / column/ walls of building including supply of all required materials such as properly colour coded wires, rigid PVC conduit, junction box & pull box etc. complete with making good the damages caused as required and as per direction of Engineer-in-Charge. 2 numbers single core 2.5 sq. mm. copper wire for phase & neutral and 1 num single core 1 sq. mm copper wire for earth continuity conductor.

2 numbers single core 4 sq. mm. copper wire for phase & neutral and 1 number single core 1.5 sq. mm copper wire for earth continuity conductor.

2 numbers single core 6 sq. mm. copper wire for phase & neutral and 1 number single core 1.5 sq. mm copper wire for earth continuity conductor.

Supply and fixing of 8 WAY BDB ( 2 × 40 + 2 × 10 + 3× 6, 1× 63 TP) Steel sheet MCB Distribution board of 415 volt on surface/reces, complete with all accessories and necessary connection.

Providing and fixing of standard copper plate earthing including supply and fixing of 8 nos. copper wire laying in 40 mm dia heavy duty G.I pipe both are 6 ft. or 2 meter hight from the bottom upper end of copper wire to connect the earth lead/ continuity which to be connected bottom and upper end to the small welded funnel complete with maonary works for earth pipe and supply and fixing of C.I hinged top cover including supply and fixing 8 mm copper wire as per requirement run from earth electrode to existing main distribution box with exacavation of earth pit of size 6.00" × 3.00" × 3.00". the earth pit shall have an alternative layer of 50 mm charcoal and 25mm. salt at 50 mm. radies around earth electrod upto the depth of 230mm from the bottom and rest shall be filled with good soil. Both of the earth wire joint by copper unit bolt including all accessories labour cost, T&P etc. complete or as per the direction of EIC.

Bangomunda MY :- Removing old cement plaster from wall including racking out joints 12mm deep & removing the debris with in 50mt lead.

Dismantling brick or stone masonary in lime or cement mortar above 3mt height including stacking the useful materials for re-use & removing the debris with in 50mt lead etc complte.

Removing old grading plaster from roof slab, cleaning the surface, lowering & removing the debris with in 50 mt lead.

Dismantling G.C.I or A.C sheet roofing after carefully removing nut & bolt including stacking of materials for re-use & removing the debris with in 50 mt lead.

Dismantling removing cement concrete flooring 7.5 cm to 10 cm thick including stacking the useful materials for reuse and removing the debris withen 50 mt lwad. Per 1sqm (data for 9.30 sqm)

Scaraping old paint with scrapers,sand papering and washing with soap water or soda including scaffolding charges up to 5M height etc.

Dismantling brick or stone masonary in lime or cement mortar under 3mt height including stacking the useful materials for re-use & removing the debris with in 50mt lead etc complte.

Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries T & P & all other machineries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Supplying and filling in foundation and plinth with good river sand well watered and rammed in layers not exceeding 23 cm in each layer including all leads and lifts, cost of all materials, labour,cess, sundries, T&P required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Providing and lying plain cement concrete of proportion (1:3:6) in foundation and plinths using approved quality cement , 40 mm. size black hard hand broken granite stone metal and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machineries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Earth work in excavation of foundation trenches in hard soil of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries T & P & all other machineries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

R.C.C. work of M 20 (equivalent to nominal mix of proportion (1:1.5:3) having a minimum compressive strength (in work test) of 200 Kg/cm2 in 15 cm. Cubes at 28 days after mixing and test conducted in accordance with IS 456 & 516 using 6mm to 20 mm (1/4” to 3/4") size (18mm not to exceed 25 percent) hard black broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or colour washing providing grooves or beads where necessary cost and conveyance royalties and taxes of all materials and labour required for the work etc. complete with all T & P in all respect but excluding cost of M.S. rods or Tor steel and binding wires of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc. of the M.S. Rod and binding wires and tying the grills and placing in proper position in all floors. Column footing, Base.

Grade beam/Tie beam/Plinth band

Column & Beam (up to 5m. )

Lintel (G. F.)

Roof slab (G.F.)

Providing fixing and placing of Tor steel (HYSD FE-500 Make- (SAIL/ JINDAL/ RINL/ SHYAM/ TISCON) for RCC work in all floors of required diameter of approved quality with straightening bent up or coiled rods" Tor rods" cutting, bending, cracking, hooking, welding or jointing(if required) the "Tor steels rods" & binding wire and tying the grills hoisting laying and placing in proper position as required for RCC works for providing if an hooks including cost, conveyance and taxes of Tor steel and binding wire of 18 to 20 gauge and labour with T & P required for the work etc. complete in all respect in all floors (weight of the binding wire will not be considered for payment) complete.

Flyash Brick masonary in Foundation and plinth in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.

Flyash Brick masonary in super structure (up to 3mt height ground floor) in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.

Flyash Brick masonary in super structure above 3mt height 1st floor in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge. Super structure above 3mtr.

Providing and painting 6 mm thick Cement Plaster (1:4) in ground floor (up to 3mt height) over RCC work with curing etc as directed by the Engineer-in-charge.

Providing and plastering 12 mm thick Cement Plaster (1:6) in ground floor (up to 3mt height) over brick work with curing etc as directed by the Engineer-in-charge.Upto 3 mt height.

Providing and plastering 12 mm thick Cement Plaster (1:6) in ground floor (Above 3mt height) over brick work with curing etc as directed by the Engineer-in-charge.Upto 3 mt height.

Providing and painting 16 mm thick Cement Plaster (1:6) in ground floor (up to 3mt height)over brick/stone work with curing etc as directed by the Engineer-in-charge. Upto 3 mt height.

Providing and lying plain cement concrete of proportion (1:2:4) using approved quality cement , 20 mm.down graded size black hard crusher broken granite stone chips and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machineries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Painting two coats with distemper over one coat of primer of approved make and finished smooth and even surface including including cost of scaffolding staging charges with cost of all materials, taxes, laboorer T&P etc complete.Up to 3 mt height.

Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Upto 3 mt height. (Ground floor).

Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Upto 3 mt height. (Ground floor).

4cm thick grading concrete (1:2:4) on roof slab with 12mm & down graded size HG chips including all cost, conveyance, royalty & taxes etc. comp. to work site for old work as per the specification approved by the department & direction of E.I.C (data per 1sqm)

2.5 cm thick A.S flooring with C.C (1:2:4) including punning & using 12mm size HG chips with all cost conveyance royalty and taxes etc comp.

Supplying, fitting ,fixing of M.S.Grill with shutter in doors/ windows/ventilator /gate etc including all cost of materials, labourer,T & P ,taxes etc complete as directed by the Engineer-in-charge .

Polishing/Painting 2 coats with approved synthetic enamel paint on steel/wood work to give an even shade including cost of all materials,labourer,sundries,T & P etc complete as directed by the Engineer-in-charge

Filling in foundation &plinth with excavated materials including watering & ramming as directed by the Engineer-in charge .

Manufacturing supplying M.S Angular truss, including fabrication and & fixing in position including all cost etc as per direction of Engineer-in-charge. complete.

Supplying & fitting fixing of precotated Galvanized iron profile sheet semi gloss of total coated thickness 0.50 mm in roof drilling holes in wind ties including fixing of ridges vallyes,wind ties with all cost of J/L Hooks etc.complete as per direction Engineer- In- Charge.

Supplying and fixing in position M.S Shutters made out of M.s angle.M.S flat and M.S sheet as per design with one coat of anti-corrosive primer painting

Providing Antitermite treatment chemical emulsion IMIDACLOPRID 30.5 SC including all cost etc complete.

Supplying, fitting & fixing of pre-cast concrete ventilators of size 0.38mt. X 0.25mt. including all cost etc complete.

Supplying, fitting & fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC. Ground floor

Supply and lying of 20 mm dia non-metalic flexible polythene conduit over existing roof surface including cost of all labour , meterial T & P . Etc. complete or as per the direction of E.I.C.

Supply and fixing of box type G.I fan hook on existing roof surface.

Providing average 20mm thick grading plaster with cement mortare (1:4) over top of roof terrace including scraping and cleaning, close chipping if required, the roof surface, laying plastering and finishing smooth to required level and slope including rounding the corners at walls as per the direction of Engineer-in-charge including cost of all materials with taxes, royalties and transportation, sundries, T&P, watering and curing by ponding water over terrace slab up to required period etc. complete for First floors.

Supplying and fixing in position M.S Shutters made out of M.s angle.M.S flat and M.S sheet as per design with one coat of anti-corrosive primer painting

Sindhekela MY :- Removing old cement plaster from wall including racking out joints 12mm deep & removing the debris with in 50mt lead.

Dismantling brick or stone masonary in lime or cement mortar under 3mt height including stacking the useful materials for re-use & removing the debris with in 50mt lead etc complte.

Dismantling brick or stone masonary in lime or cement mortar above 3mt height including stacking the useful materials for re-use & removing the debris with in 50mt lead etc complte.

Removing old grading plaster from roof slab, cleaning the surface, lowering & removing the debris with in 50 mt lead.

Dismantling G.C.I or A.C sheet roofing after carefully removing nut & bolt including stacking of materials for re-use & removing the debris with in 50 mt lead.

Dismantling removing cement concrete flooring 7.5 cm to 10 cm thick including stacking the useful materials for reuse and removing the debris withen 50 mt lwad. Per 1sqm (data for 9.30 sqm)

Scaraping old paint with scrapers,sand papering and washing with soap water or soda including scaffolding charges up to 5M height etc.

Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries T & P & all other machineries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Earth work in excavation of foundation trenches in hard soil of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries T & P & all other machineries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Supplying and filling in foundation and plinth with good river sand well watered and rammed in layers not exceeding 23 cm in each layer including all leads and lifts, cost of all materials, labour,cess, sundries, T&P required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Providing and lying plain cement concrete of proportion (1:3:6) in foundation and plinths using approved quality cement , 40 mm. size black hard hand broken granite stone metal and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machineries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge.

R.C.C. work of M 20 (equivalent to nominal mix of proportion (1:1.5:3) having a minimum compressive strength (in work test) of 200 Kg/cm2 in 15 cm. Cubes at 28 days after mixing and test conducted in accordance with IS 456 & 516 using 6mm to 20 mm (1/4” to 3/4") size (18mm not to exceed 25 percent) hard black broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or colour washing providing grooves or beads where necessary cost and conveyance royalties and taxes of all materials and labour required for the work etc. complete with all T & P in all respect but excluding cost of M.S. rods or Tor steel and binding wires of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc. of the M.S. Rod and binding wires and tying the grills and placing in proper position in all floors. Column footing, Base.

Grade beam/Tie beam/Plinth band

Column & Beam (up to 5m. )

Providing fixing and placing of Tor steel (HYSD FE-500 Make- (SAIL/ JINDAL/ RINL/ SHYAM/ TISCON) for RCC work in all floors of required diameter of approved quality with straightening bent up or coiled rods" Tor rods" cutting, bending, cracking, hooking, welding or jointing(if required) the "Tor steels rods" & binding wire and tying the grills hoisting laying and placing in proper position as required for RCC works for providing if an hooks including cost, conveyance and taxes of Tor steel and binding wire of 18 to 20 gauge and labour with T & P required for the work etc. complete in all respect in all floors (weight of the binding wire will not be considered for payment) complete.

Flyash Brick masonary in Foundation and plinth in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.

Flyash Brick masonary in super structure (up to 3mt height ground floor) in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.

Flyash Brick masonary in super structure above 3mt height 1st floor in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge. Super structure above 3mtr.

Providing and painting 6 mm thick Cement Plaster (1:4) in ground floor (up to 3mt height) over RCC work with curing etc as directed by the Engineer-in-charge.

Providing and plastering 12 mm thick Cement Plaster (1:6) in ground floor (up to 3mt height) over brick work with curing etc as directed by the Engineer-in-charge.Upto 3 mt height.

Providing and plastering 12 mm thick Cement Plaster (1:6) in ground floor (Above 3mt height) over brick work with curing etc as directed by the Engineer-in-charge.Upto 3 mt height.

Providing and painting 16 mm thick Cement Plaster (1:6) in ground floor (up to 3mt height)over brick/stone work with curing etc as directed by the Engineer-in-charge. Upto 3 mt height.

Providing and lying plain cement concrete of proportion (1:2:4) using approved quality cement , 20 mm.down graded size black hard crusher broken granite stone chips and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machineries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Painting two coats with distemper over one coat of primer of approved make and finished smooth and even surface including including cost of scaffolding staging charges with cost of all materials, taxes, laboorer T&P etc complete.Up to 3 mt height.

Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Upto 3 mt height. (Ground floor).

Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Upto 3 mt height. (Ground floor).

Supplying, fitting ,fixing of M.S.Grill with shutter in doors/ windows/ventilator /gate etc including all cost of materials, labourer,T & P ,taxes etc complete as directed by the Engineer-in-charge .

Polishing/Painting 2 coats with approved synthetic enamel paint on steel/wood work to give an even shade including cost of all materials,labourer,sundries,T & P etc complete as directed by the Engineer-in-charge

Filling in foundation &plinth with excavated materials including watering & ramming as directed by the Engineer-in charge .(2/3rd rate of respective item )

2.5 cm thick A.S flooring with C.C (1:2:4) including punning & using 12mm size HG chips with all cost conveyance royalty and taxes etc comp.

Manufacturing supplying M.S Angular truss, including fabrication and & fixing in position including all cost etc as per direction of Engineer-in-charge. complete.

Supplying & fitting fixing of precotated Galvanized iron profile sheet semi gloss of total coated thickness 0.50 mm in roof drilling holes in wind ties including fixing of ridges vallyes,wind ties with all cost of J/L Hooks etc.complete as per direction Engineer- In- Charge.

Supplying and fixing in position M.S Shutters made out of M.s angle.M.S flat and M.S sheet as per design with one coat of anti-corrosive primer painting

Providing Antitermite treatment chemical emulsion IMIDACLOPRID 30.5 SC including all cost etc complete.

Muribahal MY :- Removing old cement plaster from wall including racking out joints 12mm deep & removing the debris with in 50mt lead.

Dismantling brick or stone masonary in lime or cement mortar under 3mt height including stacking the useful materials for re-use & removing the debris with in 50mt lead etc complte.

Dismantling removing cement concrete flooring 7.5 cm to 10 cm thick including stacking the useful materials for reuse and removing the debris withen 50 mt lwad. Per 1sqm (data for 9.30 sqm)

Scaraping old paint with scrapers,sand papering and washing with soap water or soda including scaffolding charges up to 5M height etc.

Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries T & P & all other machineries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Supplying and filling in foundation and plinth with good river sand well watered and rammed in layers not exceeding 23 cm in each layer including all leads and lifts, cost of all materials, labour,cess, sundries, T&P required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Providing and lying plain cement concrete of proportion (1:3:6) in foundation and plinths using approved quality cement , 40 mm. size black hard hand broken granite stone metal and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machineries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries T & P & all other machineries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

R.C.C. work of M 20 (equivalent to nominal mix of proportion (1:1.5:3) having a minimum compressive strength (in work test) of 200 Kg/cm2 in 15 cm. Cubes at 28 days after mixing and test conducted in accordance with IS 456 & 516 using 6mm to 20 mm (1/4” to 3/4") size (18mm not to exceed 25 percent) hard black broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or colour washing providing grooves or beads where necessary cost and conveyance royalties and taxes of all materials and labour required for the work etc. complete with all T & P in all respect but excluding cost of M.S. rods or Tor steel and binding wires of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc. of the M.S. Rod and binding wires and tying the grills and placing in proper position in all floors. Column footing, Base.

Grade beam/Tie beam/Plinth band

Column & Beam (up to 5m. )

Lintel (G. F.)

Chajja projection (G.F)

Stair case (G.F.)

Roof slab (G.F.)

Providing fixing and placing of Tor steel (HYSD FE-500 Make- (SAIL/ JINDAL/ RINL/ SHYAM/ TISCON) for RCC work in all floors of required diameter of approved quality with straightening bent up or coiled rods" Tor rods" cutting, bending, cracking, hooking, welding or jointing(if required) the "Tor steels rods" & binding wire and tying the grills hoisting laying and placing in proper position as required for RCC works for providing if an hooks including cost, conveyance and taxes of Tor steel and binding wire of 18 to 20 gauge and labour with T & P required for the work etc. complete in all respect in all floors (weight of the binding wire will not be considered for payment) complete.

Flyash Brick masonary in Foundation and plinth in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.

Flyash Brick masonary in super structure (up to 3mt height ground floor) in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.

Providing and painting 6 mm thick Cement Plaster (1:4) in ground floor (up to 3mt height) over RCC work with curing etc as directed by the Engineer-in-charge.

Providing and plastering 12 mm thick Cement Plaster (1:4) in ground floor (up to 3mt height) over brick work with curing etc as directed by the Engineer-in-charge.Upto 3 mt height.

Providing and plastering 12 mm thick Cement Plaster (1:6) in ground floor (up to 3mt height) over brick work with curing etc as directed by the Engineer-in-charge.Upto 3 mt height.

Providing and painting 16 mm thick Cement Plaster (1:6) in ground floor (up to 3mt height)over brick/stone work with curing etc as directed by the Engineer-in-charge. Upto 3 mt height.

Providing and lying plain cement concrete of proportion (1:2:4) using approved quality cement , 20 mm.down graded size black hard crusher broken granite stone chips and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machineries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Painting two coats with distemper over one coat of primer of approved make and finished smooth and even surface including including cost of scaffolding staging charges with cost of all materials, taxes, laboorer T&P etc complete.Up to 3 mt height.

Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Upto 3 mt height. (Ground floor).

Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Upto 3 mt height. (Ground floor).

2.5 cm thick A.S flooring with C.C (1:2:4) including punning & using 12mm size HG chips with all cost conveyance royalty and taxes etc comp.

Cost, conveyance and labour for spreading stone screened dust and consolidation with PRR including watering, cost and conveyance of stone screen dust etc complete as per specification and direction of Engineer

Supplying, fitting ,fixing of M.S.Grill with shutter in doors/ windows/ventilator /gate etc including all cost of materials, labourer,T & P ,taxes etc complete as directed by the Engineer-in-charge .

Polishing/Painting 2 coats with approved synthetic enamel paint on steel/wood work to give an even shade including cost of all materials,labourer,sundries,T & P etc complete as directed by the Engineer-in-charge

Filling in foundation with muroom well watered & rammed including cost,conveyance,royality & taxes etc. complete to work site.

Filling in foundation &plinth with excavated materials including watering & ramming as directed by the Engineer-in charge .

Manufacturing supplying (50mm X 100mm X 50mm) 5mm C chhanel purlin,runner and Fender to plinth band (Angular) including fabrication and & fixing in position including all cost etc as per direction of Engineer-in-charge. complete.

Supplying, fitting & fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC. Ground floor

Supplying and laying mat finish ceramic floor tiles of approved shade in floors of toilets using premium quality 300mm X 300mm size and 8mm thick tiles having average bending strength 300-350Kg/Sqcm . set in cement mortar of proportion (1:1) and cement slurry to proper line and level including cutting to required size and shape and fixing at corners splays etc. and the joints are to be properly finished with white cement with colouring pigments including washing and cleaning with oxalic acid etc. complete Ground floor

Supplying and laying mat finish ceramic wall tiles of approved shade in wall of toilets using premium quality 300mm X 300mm size and 8mm thick tiles having average bending strength 300-350Kg/Sqcm . set in cement mortar of proportion (1:1) and cement slurry to proper line and level including cutting to required size and shape and fixing at corners splays etc. and the joints are to be properly finished with white cement with colouring pigments including washing and cleaning with oxalic acid etc. complete Ground floor.

Supply and lying of 20 mm dia non-metalic flexible polythene conduit over existing roof surface including cost of all labour , meterial T & P . Etc. complete or as per the direction of E.I.C.

Supply and fixing of box type G.I fan hook on existing roof surface.

Providing, Fitting & Fixing of Stainless steel of 304 grade in hand railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes connected with stainless steel pipes of diameter 15 mm (2 mm thick) in 3 rows as per approved design and specification including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete for all floors as per specification & direction of the Engineer-in-charge.

Providing, fitting and fixing of MARBLE SLAB (minimum 16mm thick dunguri varity, 0.4sqm to 1.00 sqm) of required size of approved quality & shade laid over 25 mm thick cement mortar of prop. (1:1) to proper slope & level jointed with neat cement slurry with approved colour pigment to match the colour of slab over floor, landing and trade, 3 no.s of cutting, acid washing and polishing, watering, curing, cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete and as per specification & direction of Engineer-in-charge. Note :- Sample of Marble Slabs shall be approved before procurement and use.

Providing average 20mm thick grading plaster with cement mortare (1:4) over top of roof terrace including scraping and cleaning, close chipping if required, the roof surface, laying plastering and finishing smooth to required level and slope including rounding the corners at walls as per the direction of Engineer-in-charge including cost of all materials with taxes, royalties and transportation, sundries, T&P, watering and curing by ponding water over terrace slab up to required period etc. complete for First floors.

Cost, supplying ,fitting &fixing of bathroom fibre door of approved make including fibre choukatha all GI fittings all cost ,conveyance taxes etc. complete.

Finishing wall surface of walls with Acylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete.

Cost, Supplying, Fitting and fixing of Indian Type Pan 32" size including cost fitting materials etc. complete.

Labour for drilling a perfectly vertical borehole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories ,tools and plants and consumables etc.for lowering of 125 mm dia P.V.C./G.I. pipes for housing ,fitted with socket and with or without well screen as per the necessity for soft ,medium ,hard and boulder formation (G.I./PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of tube well ).(a) Drilling of 125 mm dia bore ( 0 mtr to 30 mtr.)

(b) Drilling of 100 mm dia bore ( 31 mtr to 60 mtr.)

(c) Drilling of 100 mm dia bore ( 61 mtr to 75 mtr.)

Lowering of 125 mm dia PVC casing pipe ( 0 mtr. To 30 mtr.)Lowering the following size GI/PVC pipes with or without slotted pipes as per the necesity from ground level upto 30 mtrs depth and fitted 7 fixed up in perfectly vertical position including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials ,tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.

Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and lobour as per the direction of engineer-in- charge.

Cost, supplying, laying, jointing, fitting & fixing of following size PVC/GI pipes including cost of required PHD fitting materials all cost, labour etc complete. (a) 125mm dia PVC pipeline

(b) 100mm dia PVC pipeline

(c) 38mm dia PVC pipeline

(d) 25mm dia PVC pipeline

(e) 12mm dia PVC pipeline

Cost, supplying, laying, jointing, fitting & fixing of different sizes fitting materials including all cost, labour etc complete. (a) 12mm dia Stop Cock

(b) 25mm dia Bib Cock

Cost, Supplying, Fitting and lowering of 1.50/1.00 H.P submersible pump set with cable,clamp and all fitting materials etc complete of approved brand.

Cost, Supplying,Fitting and installation of 1000 ltr capacity Sintex water tank complete including cost of fitting materials.

Cost, Supplying, Fitting and fixing of Indian Type Pan 32" size including cost fitting materials etc. complete.

Cost, Supplying,Fitting and fixing of Gent's Urinal including cost fitting materials etc. complete.

Cost, Supplying,Fitting and fixing of Ladies Urinal including cost fitting materials etc. complete.

Cost, supplying, laying, jointing, fitting & fixing of 100m dia PVC Bend Pipes including cost of required PHD fitting materials all cost, labour etc complete.

Recssed wiring to light , ceiling fan, 5 A convenient wall plug point with 1 sq. mm. PVC insulated 650 volt grade standed copper conductor wire duly colour coded for phase i.e Red, yellow & Blue depending upon phase, neutral (Black) & earth continuity conductor and lop earth to fitting & fixing ( Green) laid through rigid PVC conduit pipe of 2 mm wall thickness cocealed/ surface in the wall/ column/ceiling of the building including supply of all required materials such as flush type switches, flush type plug sockets, sheet metal switch boxes with Bakelite cover, PVC conduit, Properly colour coded wires, junction boxes, point, wiring ternination equipment such as three pin ceiling rose, angle/batten holder etc. as the case may be complete eith making good the damaged caused as required as per direction of Engineer-in Charge (locking , arrangement to switch board are to be supplied as per requirement by E.I.C.) Light point (short)

Light point (Medium)

Ceiling fan point

6 AMP plug point on same board

Recssed wiring to 15 AMP plug point with 2×4 Sq. mm. FR PVC. Insulated single core multistrand copper conductor of ISI marked with 20 mm dia PVC conduit along with 1×1.5 Sq.mm. FR PVCV insulated single core multistrand copper conductor for loop earthing as required.

Recessed wiring to sub-main with following number & size of PVC insulated 1100 volt grade standard copper conductor wire duly wiring of circuits & sub-main with following number & size of PVC insulated 1100 volt grade standard copper conductor duly coloured coated for phase i.e Red, yellow & Blue depending upon phase, neutral (Black) & earth continuity conductor and lop earth to fitting & fixing ( Green) laid through rigid PVC conduit pipe of 2 mm wall thickness concealed in ceiling / column/ walls of building including supply of all required materials such as properly colour coded wires, rigid PVC conduit, junction box & pull box etc. complete with making good the damages caused as required and as per direction of Engineer-in-Charge. 2 numbers single core 2.5 sq. mm. copper wire for phase & neutral and 1 num single core 1 sq. mm copper wire for earth continuity conductor.

2 numbers single core 4 sq. mm. copper wire for phase & neutral and 1 number single core 1.5 sq. mm copper wire for earth continuity conductor.

2 numbers single core 6 sq. mm. copper wire for phase & neutral and 1 number single core 1.5 sq. mm copper wire for earth continuity conductor.

Supply and fixing of 8 WAY BDB ( 2 × 40 + 2 × 10 + 3× 6, 1× 63 TP) Steel sheet MCB Distribution board of 415 volt on surface/reces, complete with all accessories and necessary connection.

Providing and fixing of standard copper plate earthing including supply and fixing of 8 nos. copper wire laying in 40 mm dia heavy duty G.I pipe both are 6 ft. or 2 meter hight from the bottom upper end of copper wire to connect the earth lead/ continuity which to be connected bottom and upper end to the small welded funnel complete with maonary works for earth pipe and supply and fixing of C.I hinged top cover including supply and fixing 8 mm copper wire as per requirement run from earth electrode to existing main distribution box with exacavation of earth pit of size 6.00" × 3.00" × 3.00". the earth pit shall have an alternative layer of 50 mm charcoal and 25mm. salt at 50 mm. radies around earth electrod upto the depth of 230mm from the bottom and rest shall be filled with good soil. Both of the earth wire joint by copper unit bolt including all accessories labour cost, T&P etc. complete or as per the direction of EIC.

Please Enable Macros to View BoQ information