REPLACEMENT OF ASBESTOS SHEET WITH GALVANISED SHEET AND CONNECTED ITEMS OF BLDG NO T 41 OF ENGR STATIC WORKSHOP EME KHADKI SPECIAL REPAIR TO ROOF AND FLOOR OF STORAGE SHED NO T 04 AT 204 PET PL ASC REPLACEMENT OF EXISTING BARBED WIRE ON SECURITY FEN

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) of any description, any thickness including cover fillets and frame work etc, complete all as specified and directed.

Material & Labour for snap grid ceiling with and including 19mm thick semi - perforated edge 60x60cm in ceiling board over GI and including grid prelude XL 24 mm grid main runner height 37mm and secondary runner height 30mm including 2.6mm/2.8mm GI wire suspenders of suitable length as per manufacturers instructions complete all as specified and directed .

Taking down chowkats and frame exc 1.5 Sqm and n.exc 4.0 sqm incl shutter with out taking off shutters from frame and removing from site complete all as specified and directed by Enginer in charge

Supply & fix Pressed steel frame for doors of size 125x 60mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed.

Material & Labour for PCC 1:3:6 type C-0 using 12.50mm graded stone aggregate as in filling of pressed steel chowkat complete all as specified and directed

Supply & fix 35mm thick flush shutters, solid core construction with block board core and plywood face panels , commercial type on both sides complete all as specified and directed.

Supply & fix 35mm thick (IInd Class hardwood) factory made gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars) , edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass , etc, sizes of members of shutters as specified in SSR Part I , Section 8 , Clause 8.20 (a) , supplied and fitted to chowkats complete all as specified and directed

Supply & fix in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed

Supply & fix Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed & fixed length of bolt 250 mm all as directed.

Supply & fix Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fix 150mm long complete all as specified and directed.

Supply & fix 150 mm size Mild steel pressed handles, oval type, stove enamelled black complete.

Supply & fix in repairs 100 mm mild steel butt hinges medium weight, cold rolled all as directed.

Supply & fix in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Material & Labour for preparation to new wooden surfaces of any description over and including 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

Material & Labour for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over and including a coat of red oxide primer complete all as specified and directed.

Supply & fix aluminium powder coated window sliding type (3 track) with and including frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia SS wire mesh average width of aparture 1.40mm fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade complete all as directed Note:- Making good of all wall surface with matching to existing surface internal and external includes in quoted rate complete all as specified and directed.

Material & Labour for 20mm thick Granite slab machine cut in jambs, cills, cooking platforms, counter tops and like laid over and including cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete including screed bed 15mm thick in CM 1:4 complete all as specified and directed.

Dismantling of Asbetos sheet(corrugated, semicorrugated) in roof covering etc, complete all as specified and directed.

Supply & fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, but length of bolts exc 5cm but n exc 10cm long of Diameter of shank 11 to 15mm complete all as specified and directed.

Supply & fix Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directe by the Enginer in charge.

Supply & fix Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified all directed by the Enginer in charge.

Material & Labour for Preparation of new or unteated old plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and pattern over and including a coat of primer over and including 1mm thick wall care putty finished even and smooth complete all as specified.

Dismantaling of mild steel work of any description complete all as specified & directed by Engineer in charge.

Demolition of stone slabs and tiles laided, beded and pointed in any mortar of any description or thickness in floors, aprons and walls etc complete all as specified and directed

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed

Material & Labour for machine cut Kota stone slab flooring 20 to 25mm thick in flooring but one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing moulding complete, over and including 15 mm thick screed bed or bedding in CM 1:6for laying floor finishes, complete all as specified and directed.

Material & Labour for Steel work in roof trusses ,trussed, purlins, crane gantries,rails and fastening and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces, cleat etc conforming to Fe 410W Gde E250 quality A complete all as specified and directed.

Supply & fix Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment GDE Fe 410W Gde E250 quality A complete all as specified and directed

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc and including removal of debris out side MD land complete all as specified and as directed.

Material & Labour for rendering to internal brick / concrete surfaces, 15 mm thick in Cement Mortar (1:6), surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour for 15 mm thick plastering in cement mortar 1:4 on external surfaces finished the surfaces ( upto 10 mtr height) complete all as specified and directed.

Material & Labour for preparing the new surfaces and applying two coats of Finishing walls with Premium Acrylic Smooth exterior emulsion paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) upto 4 storey complete all as specified and directed.

Material & Labour for providing water proofing plaster at the junction of wall & slab at chajja, lintel etc of average thick 20mm in CM (1:3) with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. Note : Rates shall deemed to be inclusive of cost of water proofing compound.

Material & Labour for 75mm thick, PCC (1:3:6), Type C-1, using 20mm graded stone aggregate as in Plinth protection etc surface finished even and fair without using extra cement including necessary form work if required, provision of vertical joints at 2 mtr centre to centre all as directed by Enginer in charge.

Demolition of brickwork or stone work/PCC block masonary built in cement mortar or cement lime mortar complete all as specified

Material & Labour for precast cement concrete 1:3:6, type C-1, (20mm graded stone aggregate ) masonary with solid blocks, exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

All as per item No 37 above but except block recovered from demolition complete all as specified and directed.

Material & Labour for preparation of new undecorated surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed

Material & Labour for preparation of old undecorated surface of wall and applying two coats of cement base paint complete all as specified and directed.

Material & Labour for preparation of old steel surfaces of any discription, over 10 cm in width or girth, not otherwise described and painting with two coat of synthetic enamel paint complete all as specified.

Supply & fix Mild steel for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E165 complete all as specified and directed

Material & Labour for cement concrete in foundation PCC 1:3:6 type C2 using 40mm graded stone agg for fencing post etc complete all as specified and directed

Supply & fix in repairs galvanised 2 strand barbed wire 2.24mm dia of wire and 2mm dia of barbed at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provn of galvanised MS wire staples or steel pins etc as specified.

Material & Labour for false ceiling of plain gypsum board 12mm thick and frame made out of MSGI BPS grade, angle 24mm x24mmx0.43mm, 'T' section 24mmx25mmx0.30mm and main runner 'T' section 24mmx38mmx0.35mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c, hanging with 2.50/3.00 mm dia Gl wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with painting two coats of oil bound distemper over one coat of primer and preparation of surface complete all as specified and directed by the Enginer in charge.

Supply & fix POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling juction complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position any thickness complete all as specified and directed

Material & Labour for Cement concrete 1:3:6 type C1, 75mm thick (20mm graded stone aggregate) as in floor and paving etc complete all as specified and directed

Material & Labour for Cement concrete 1:4:8 type D2 (40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Removing excavated material exc. 250 mtr but n.exc. 500mtr and depositing where directed complete all as specified and directed

Material & Labour for RCC 1:2:4 type B1 (Nominal mix) (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Material & Labour for RCC 1:2:4 type B1 (Nominal mix) (20 mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed

Supply & fix Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) qulity A complete all as specified and directed

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

Material & Labour for coloured Exterior Alleviation Brick wall Cladding tiles in vertical surface of size 215mmx55mm x 10 to 12mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement screed 10mm thick in CM 1:4 complete all as specified

Material & Labour for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete fixed over and including backing coat of 10mm thick in CM 1:4 complete all as specified and directed

Material & Labour for 80mm thick M-40 grade coloured glossy finished interlocking tiles/ blocks any shape and size , jointed & pointed in neat cement slurry with pigment to match the shade of tile etc complete all as specified and as directed.

Material & Labour for Pre-cast cement concrete type C1 1:3:6 block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4, complete all as specified

Material & Labour for Providing cement concrete 1:2:4 type B0 (12.5 mm graded stone aggregate) as in copings, filleting etc complete all as specified and directed

Supply & fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and spikes in gate fixing complete all as specified and directed Fe 410W Gde E250 quality A.

Material & Labour for sand/ stone dust filling under floors or in foundations including watering and consolidation complete all as specified and directed

Material & Labour for two coats of cement base paint on newly plastered surfaces of walls including preperation of new surfaces complete all as specified and directed

Supply & fix 1mm thick powder coated aluminium Panel (ACP) including necessary aluminium frame work fixed over steel and RCC frame work complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Material & Labour for point wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through and including non metallic rigid PVC conduit and accessories concealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes to provision of Modular switches to house switch/regulators etc including Modular Plate and Covers for one fan/light /bell point controlled by one switch/bell push complete all as specified and directed.

All as per item No 66 above but for one 3 pin 5 Amps socket on same board controlled with other switches on same board complete all as specified and directed

All as per item No 66 above but for one 3 pin 5 Amps socket on independent board complete all as specified and directed

All as per Item No 66 here-in- before but with 2.5 Sqmm PVC insulated multistranded copper conductor with 2.5 sqmm cable as earth continuity conductor for Power Socket on independent board on the existing Concealed conduit complete all as specified and directed.

All as per Item No 66 here-in- before but with 4 Sqmm PVC insulated multistranded copper conductor with 4 sqmm cable as earth continuity conductor for Power Socket/AC/Geysers on independent board on the existing Concealed conduit complete all as specified and directed.

Supply and fix modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fix modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix modular socket 16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix modular switch 1way 16A 1 module complete all as specified and directed.

Supply and fix Modular fan regulator complete all as specified and directed .

Supply and fix ceiling rose surface bakelite with three terminals complete all as specified and directed.

Supply & fix LED fitting for Bldg security, 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete. including conncting with 1.5 sq mm copper condector 3 core flexible cable from fitting connector to ceiling rose and fix on wall with clamps & nut bolts and necessary GI bracket made of 32 mm dia light grade GI pipe of 1 mtr lenth with necessary bending complete all as specified and directed .

Supply and fixing LED lights fitting 1x 20W, 220V,AC, decorative box type with driver, holder incl LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Taking down old unserviceable Tube light fitting of any type and Supply & fix wall/ceiling mounted LED tube light fitting , Energy efficient high quality invertor batten having Lithium ion battery of 3.7V, 19 WH for backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 20/22 watt having colour temperature 6500 K (4 feets long) , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement complete all as specified and directed by Engineer in charge. Make : Jaquar/Halonix/Philips . Note :- The rates are inclusive of cost of ceiling rose -01 nos and square box-02 nos including suitable size of clamps and screws etc.

Supply and fixing LED Light fitting mirror type with high output diffuser 2 feet , 1 X 10 watt 220 V AC decorative type with driver holder and LED lamp, Alluminium housing, including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down old unserviceable wall bracket light fitting of any type & Supply & fix wall mounted high quality indoor wall bracket light cylinderical/oval shape aesthetically designed fitting in wooden housing , glass and B22/E27 holder complete including inverter LED bulb B-22 cap with opal diffuser, IP-20 and inbuilt battery backup (LED INVERTER LIGHT 10W B22 CW IP) 10 watts including necessary eletric connection with PVC insulated multistranded copper cable of size 1.5 sqmm 3 core from ceiling rose to fitting terminal complete all as specified and directed.

Taking down unserviceable submain wiring and Material & Labour for submain wiring in and including PVC conduit with two runs of 6 sq mm and one runs of 6 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS 694) drawn through and including 25 mm dia PVC rigid conduit heavy grade ISI marked (IS 9537 Part III) includung accessories such as bends, supports etc all as specified and directed. Note: Two runs of 6 sq mm and one runs of 6 sqmm cable along with conduit shall be measured as one length complete all as specified and directed

Supply & fix MCB DB SPN 8 way of any size and capacity double door type horizontal with 200A busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and directed.

Supply & fix MCB SP of capacity 5A to 32A "B' curve complete all as specified and directed

Supply & fix MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve complete all as specified and directed

All as per item No 85 but TPN 63Amps.

Material & Labour for earthing with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5mtr below ground level, connected to and including G.I. wire of size 4 mm dia by means of bolts,nuts and check nuts and washers of galvanised steel, GI pipe 15 mm dia light grade pipe for protection of GI earth lead wire both to be provided to the extent of 7.5 metres as earthing lead and connecting to the eqpt/machinery etc. incl charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 including PCC chamber made up of PCC 1:3:6 type C1 20mm graded stone aggregate & RCC Chamer cover of size 540x540x100 mm made with 1:2:4 Type B1 using 6 mm round MS bar & 8 mm MS bar for handle , 20 mm dia medium grade G.I. watering Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement incl excavation and earth work in any type of soil and testing complete all as specified and directed.

Taking down old unserviceable Exhaust fan and depositing it to MES store and Supply and fix new Exhaust fan steel body AC single phase , 230 volts of size 380 mm sweep with blades and frame and louvers complete all as specified. Note : (i) To be Fixed in Toilet block (ii) The rates are inclusive of any civil work required to fix the exhaust fan.

Material & Labour for taking down existing ceiling fan, celing cable end, dismantling blades and removing fan and blades to store and painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc after complete repairing hanging ceiling fan on existing position complete all as specified and directed

Material & Labour for Fan hook , clamps holdfasts with all necessary materials for hanging fan complete all as specified and directed

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with 20 Amp DP MCB complete all as specified and directed

Taking down unservicable metal box and supply & fix sheet metal enclosures for double door distribution board factory made duly painted 4way TPN and neutral 440 volts with 200 amps rated bus bar , suitable for fixing MCB /Isolators complete all as specified and directed

Supply and fix Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB of capacity 32/40 Amps complete all as specified and directed (For three phase supply to the equipments)

Taking down old submain wiring and Material & Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into and including PVC Conduit concealed in wall of suitable size including 2.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing complete all as specified and directed by Engineer in charge.

All as per item no 94 but of Cable size 4 sqmm 1100 volt grade drawn into PVC Conduit complete all as specified and directed

Supply and fix in repairs Bell push, Modular type, 6 Amp flush type ,240volt AC complete all as specified and directed

Supply and fix in repair electric bell Ding Dong, AC 230 volts complete all as specified and directed.

Taking down old unserviceable fitting and Suipply & fix wall mounted extruded aluminium housing high quality indoor batten LED tube 22 watt colour temperature 6500 K (4 feets long) lumen 2000 to 3000, PF> 0.95, THD less 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement complete all as specified and directed by Engineer in charge. Make : Havells/wipro/Halonix .

Taking down old unserviceable Recess mounting fitting of any type from any height and Supply & fix high quality Energy efficient Recess/Surface mounting 2'x2' recessed inverter fitting, CRCA powder coated steel housing with high power brightness having BIS certification , fitting should be LM 80 certified with system efficacy greater than and equal to 100 lumens/watt, having Lithium ion battery of cap 3.7V, 19 WH for backup upto 2 hrs having operating voltage range 90volts to 300volts having colour temperature 5700K, PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, connecting with three core flexible copper wire from connector to ceiling rose as per site requirement complete all as specified and directed by Engineer in charge. Make : Jaquar/Halonix/Havells/Crompton . Note :-The rates are inclusive of civil work (minor plastering, painting, false ceiling repair etc) wherever required for fixing the fittings to the roofs/ceilings.

Taking down old unservicable ceiling fan depositing it to MES store and Supply and fixing ceiling fans complete with blades, down rods, electronic regulator/REMOTE and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed Make : Havells/Crompton/Bajaj/USHA .

Supplying, laying, jointing, commissioning and testing in repair XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to IS-7098 (Part-I-1988) of size 16 Sqmm 2 core laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, PVC sleeve etc complete all as directed by Engineer in charge . Make : Polycab/Havells / Gloster / Finolex Note : Earth work, bricks, riddled earth, GI pipe for protection of cable will be measured & paid under relevant items of schedule

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed.

All as per item No 102 but in hard/dense soil.

Removing excavated material soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed

Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.

Material & Labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as directed. Note - Punned thickness shall only be measured & paid .

Material & Labour for road cutting/foot path and making good with PCC 1:3:6 TYPE C-2 ( using 40 mm graded stone aggregate) of 150 mm width complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover LV, Type-I, flat, size 250mm x 150mm x 40mm for Under ground cable complete all as specified and directed.

Supply and laying GI tubes light grade, galvanized, 40 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable complete all as directed

Material & Labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 mtr deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level , connected to 32x6 mm GI strip as earthling lead by means of blots and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel, wire gauge. CI cover with frame , 40 MM dia GI pipe light grade for protection of wire/strip etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point complete all as specified and directed and testing on completion. (Earthing to be done for existing LT panel near gate location)

Supply & fix Junction box of size not less then 140x140x95mm, made of high quality thermo plastic polystyrene, weather proof, dust, jet water proof, chemical, acid corrosion, impact, insulated & shock proof IP 66 / 67 for outdoor Installation with internallly embedded gasket (PUR) including the box fitted with 40 Amps 3 pole bakelite terminals and MCB SP 2 Amps for post top lantern light control mounted on gate pillar including provision of cable entry and exit complete all as specified and directed by Engineer in Charge. Make :- Sintex /Indokop / Hensel

Supply & fix in repair LED post top lantern 40W aluminium housing, with IP 65/66 protection, clear acrylic diffuser, die cast aluminium spigot , spun aluminium powder coated top cover complete with accessoires with suitable size 40/50/60 mm outer dia GI pipe upto the length of 1 mtrs and plastering work wherever reqd complete all as specified and directed. Make :- Halonix cat no HLPT-04-40-CW or equivalent in Crompton/Wipro/Surya.

Supply and Fix in repair LED Flood light fitting of capacity 250 watts made up of pressure die cast aluminium housing with toughned glass and high power LED's and secondary lenses, having system efficacy greater than 110 lumen per watts with surge protection device included. The luminaries shall be totally enclosed dust and water proof with minimum IP -66 protection pre wired up to connector including 2.5 sq mm PVC insulated cable for making connection (upto 9 mtr length), complete all as specified and directed by Engineer in charge. Make :- Halonix/Crompton/Havells/Wipro.

Material & Labour for making fixing arrangments on existing nearby panel for connecting the new MCB SPN 32 Amps with Bus bar of the panel with necessary fabrication work to fix the breaker into the existing panel including necessary wiring connection all as specified and directed by Engineer in charge. Note :- The rates are inclusive of welding work and fabrication work to fix the MCB SPN 32 Amps to the near by existing panel.

Material & Labour for sub main wiring with two run of 1.5 sqmm FR PVC sheathed multi stranded copper conductor cable and one run of 1.5sqmm FR PVC sheathed multi stranded copper conductor cable as earth wire, from post top lantern fitting to looping box through inside PVC conduit pipe on gate pillar complete all as specified and directed by Engineer in Charge.

M/S SANDEEP CONSTRUCTION COMPANY (BID ID -3448036)

Sunrise Traders (BID ID -3448082)

SAMBHAJI D JARANDE (BID ID -3447559)

ShreHari Civil Enginneering and Contractors (BID ID -3448329)

M/S SUGAM CONSTRUCTION (BID ID -3447074)

A B S ENTERPRISES (BID ID -3448255)

S V CONSTRUCTION (BID ID -3448477)

M/S JAYCONSTRUCTION CO (BID ID -3448073)