Repair/replacement of street/security lights, UG Cable under AOR of GE (East) Ferozepur Cantt

Amount

Disconnecting and taking down fluorescent street light of any size and type checking/find out defective parts cleaning the prefix cover,repair/replacement of spare parts including necessary wiring etc for making the fittings serviceable condition and refixing in original position, testing etc complete.(Note : (i) Spare parts will be measured and paid separately)

Supply only starter holder for any type of street light fitting 1 x40/ 4x14w) including electric connection complete all as specified and directed.

Supply only Bippin holders in repair suitable for 1 x (28/14 w) street light fitting including electric connection complete all as specified and directed ISI mark.

Supply only chock/ballast 40 watt electronic for repair of street light fitting including electric connection etc complete all as specified and directed.

Supply only stater suitable for tube light fittings 1x40 watt

Supply only Tube rod 36/40 watt ISI mark

Supply only electronic choke suitable for 1x14w (single choke)street light fitting of make bajaj/Havells or other equivalant made as approved by GE.

Supply only T5 lamp suitable for existing street light fitings of capacity 4 x 14 watt with complete all as specified and directed.

Supply only CFL 85 Watt ISI mark for street light fittings complete all as specified and directed.

Disconnecting and taking down repairable HPSV/HPMV/MH lamp type street light fitting of any type and capacity and make from existing 9 mtr/11 mtr pole for checking to find out the defects cleaning the bowl and prefix cover, repair/replacement of spare parts including necessary wiring etc for making the fitting in serviceable condition and refixing in original position, testing etc complete all as specified and directed. Note : Spare parts will be measured and paid separtely.

Supply only porcelin brass holder for 70W street light fitting

Supply only porcelin brass holder for 150/250 W street light fitting

Supply only metal hallide lamp of cap 250 W ISI mark

Supply only HPSV lamp of cap 70 W ISI mark

Supply only HPSV lamp of cap 150 W ISI mark

Supply only HPSV lamp of cap 250 W ISI mark

Supply only ignitor suitable for HPSV/MH lamp fitting of cap 70/150/250 Watt ISI mark.

Supply only copper wound ballast chock of 70 Watt, 240 Volts ISI mark

Supply only copper wound ballast chock of 150 Watt, 240 Volts ISI mark

Supply only copper wound ballast chock of 250 Watt, 240 Volts ISI mark

Disconnecting and taking down repairable LED type street light fitting of any type and capacity and make from existing 9 mtr/11 mtr pole for checking to find out the defects cleaning the glass and prefix cover, repair/replacement of spare parts including necessary wiring etc for making the fitting in serviceable condition and refixing in original position, testing etc complete all as specified and directed. Note : Spare parts will be measured and paid separtely.

Supply only LED driver 240Volt 50Hz for 15 to 25watt LED fittings Make-crompton or other equivalant amke as approved by GE

Supply only LED driver 240Volt 50Hz for 40 to 48 watt LED fittings Make-crompton or other equivalant amke as approved by GE

Supply only LED driver 240Volt 50Hz for 60 to 90 watt LED fittings Make-crompton or other equivalant amke as approved by GE

Supply only LED surge arrester 240Volt 50Hz for 15 to 75watt LED fittings Make-crompton or other equivalant amke as approved by GE

Supply only LED surge arrester 240Volt 50Hz for 75 to 150watt LED fittings Make-crompton or other equivalant amke as approved by GE

Supply only LED bulb complete set 240Volt 50Hz for 15 to 25watt LED fittings Make-crompton or other equivalant amke as approved by GE

Supply only LED bulb complete set 240Volt 50Hz for 40 to 48 watt LED fittings Make-crompton or other equivalant amke as approved by GE

Supply only LED bulb complete set 240Volt 50Hz for 60 to 90 watt LED fittings Make-crompton or other equivalant amke as approved by GE

Supply and lay 1100 grade heavy duty UG cable with PVC insulated with stranded aluminium conductor 2 core 10 sqmm with an inner sheathed of PVC tape armoured with galvanised steel wire

S & F cable PVC insulated and sheathed in service connection (WPTC)with strandard aluminum conductor flat off size 2 core 10 Sq mm including 4mm GI wire and porcelene insulated apart of 01 mtr each ISI mark. complete all as specified and directed.

S&F cable PVC insulated sheathed twin core stranderd Aluminium conductor of size 2.5 Sq mm for connection of security /Street lights ISI mark complete all as specified and directed.

S&F service cable PVC insulated sheathed twin core solid aluminium conductor of size 6 Sq mm for connection of security /Street lights ISI mark complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for laying of cable foundations of poles/styas etc. and getting out in soft/loose soil complete all as specified and directed

Removal of surplus excavated material n exc. 50 m and depositing where directed at a n. exc 1.5 m above the starting point.turning filling in, including spreading,leveling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Returning filling in including spreading , levelling watering and well ramming in layers each n.exc. 25 cm thick each layer, complete all as specified and performing bottom surface to required gradient complete all as specified and directed.

M & L dry and clean fine sand for cable cushioning for cable protection complete all as specified and directed.Note : Punned down thickness shall be measured.

Supply and laying well burnt old size sub class 'B' bricks laid in trenches for cable protection.

S&F in replacement of Factory made sheet metal encloser SPN single door type made out of CRCA sheet IP 43 protection 2 way 240 v dust and vermin proof duly concealed in wall incl making good disturbed surfaces Havells / HPL/Indo asian as approved by GE, complete all as specified and directed.

S&F MCB single pole neutral 240 volts, 40 Amps, 10 KA complete all as specified and directed.

S&F MCB single pole neutral 240 volts, 63 Amps, 10 KA complete all as specified and directed.

S&F MCB single pole neutral 240 volts, 100 Amps, 10 KA complete all as specified and directed.

Supply and errecting prestressed concete poles 7.5 mtrs long of cross section 102mm X 152 mm at top and 102mm X 281mm at bottom class 10 complying with requirements of IS-1678-1978 including paints of poles with two coats of synthetic enamel paint complete all as specified and directed.

.M&L for plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in foundation of PCC pole/struts as specified incl necessary form work. complete all as specified and directed.

.M& L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation of stay assemble etc incl necessary form work complete all as specified and directed.

.M &L for plain cement concerete 1:2:4 type B-1 using 20 mm graded stone aggregate for coping around poles, incl necessary form work finishing even and smooth without using extrea cement complete all as specified and directed.

Supply and fixing in replacement of LED Street light 48 Watt 5700K made up of pressure die cast housing with toughned glass and individual high power LED with secondary optics, with IP 66 protection and impact resistance of IK07 and 10KV external SPD.Make- Havells cat part No-ENDURACITYLINERNEXGENSL48WLED757SASYBOPC or other equivalent make HPL/Crompton as approved by GE

Supply & fixing of LED Street light 60 Watt made up of pressure die cast housing with toughned glass Aesthetically designed roadway luminiare with excellent thermal management IP 66 protection Make- Crompton cat part No-LSTP-60-CDL or other equivalent of Havells/Bajaj as approved by GE

S& F LED flood light Jeta Neo 70 (70W, 6000K) energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65, suitable for highlighting architectural facade and general purpose lighting.Make- Havells cat part No-Jetaneofl70Wled757ltG or other equivallent of Crompton Greaves/HPL as approved by GE

S&F acrelic cover suitable for HPSV/MV light fittings of 70/150/250 watt complete all as specified and directed.

Supply & fixing street light pole cable junction box IP-65 with metnic knockouts for cable entry and the box made out of thermal plastic material suitable for 16/25 UG sqmm cable including clamps bolts, nuts duly painted and MCB SP 6Amp etc complete all as specified & directed

S&F GI Bracket for street light fitting bend to shape made out of GI pipe light grade '25/40mm bore upto 1.2 mtr long etc complete with MS clamps duly painted with two coats of aluminum paint with nuts/bolts/washers for fixing arrangement to pole /wall complete all as specified and directed.

Supply and fixing in replacement automatic street light switch for automatic swithcing of street light/high mast light (timer switch) based on lux level of natural light. The sensor alongwith suitable power contractor as per IEC - 60947-4-4 , MCB and support terminal and enclosed in pole/wall mounted factory made PVC enclosure made out of rust , shock, termite proof and FR grade confirming to IP 54 of capacity 5 KW, Single phase , 240 V of make Make- Kaktiya Energy system (model - swadeep 02EC5 KW1P or other quivalent model of /bajaj/Havells as approved by GE)

Supply and laying 40 MM bore GI pipe "light grade " for cable protection including taking out old/broken/rusty GI pipe with MS clamps complete all as specified and directed

M/S Sandhu Const.Co.

M/s S B Construction Company

M/S Manmohan Singh Contractor

GS and Co

A N CONSTRUCTION CO

M/S Pee Kay Builders

M/s Vishant Construction Co