REPAIR / MAINT TO FLOORING, TILING, JOINERY, PLUMBING, SANITARY FITING, CGI SHEET, PVC WATER TANKS, ROOFING, CEILING, PANELLING ETC AND PERIODICAL SERVICES TO CERTAIN OTM AND MD ACCN AT RUPA AND GACHHAM AREA OF AGE B/R-II UNDER GE 859 EWS

Amount

Taking down of cement or cement lime plaster/tile work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L rendering 15 mm thick cement plasteron external surface in CM 1:6 on brick & concrete surfaces and finished even and smooth (without using extra cement) all as specified and directed.

Material and labour for 10mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even & smooth W/O using extra cement all as specified and directed.

Material and labour for 5mm thick rendering in cement mortor(1:4) on concrete surfaces of ceiling, finished even and smooth W/O using extra cement.

M&L Preparing new plastered surfaces and applying Two coats of cement base paint over one coat of white wash surfaces of walls all as specified and directed.

M&L Preparing newly plastered surfaces of walls and applying three coats of white wash.

M&L Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD), over a coat of 3mm thick wall care putty all as specified including preperation of surfaces all as specified and directed.

Preparing newly plastered surfaces of ceilings and applying three coats of white wash all as specified and directed.

M&L Preparation of old white washed surface of wall and applying one coat of whitewash complete all as specified and directed.

M&LPreparation of old white wash surfaces of ceiling and applying one coat of whitewash on ceiling complete all as specified and directed.

Material and labour for preparation of old distempered surface of walls and applying one coat of oil bound distemper all as specified and directed.

Material and labour for washing rubbing down and scrapping of distempered and painted surfaces applying two coat of oil bound distemper

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on steel all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old treatment on external surfaces of walls and applying one coat of cement base paint (colour and tint as approved) on walls etc complete all as specified and directed.

Preparation of old treated surface and applying one of varnishing finishing coat with synthetic varnish etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint old painted surface prepring including washing and cleaning etc on steel surfaces of any description.

M & L for obliterating old writing of any description, n exc 0.1 sqm, with paint to match existing work

M & L for writing stops, commas, short lines, dashes, hyphen, brackets etc complete all as specified and directed.

M & L for preparation of new external plasterd surface of wall and ceiling apply of white putty, make the surface smooth by rubbing with emary paper and applying two coats of weather proof paint over a coat of water thinkable cement primer complete all as specified and directed ( Make : Appex of Asian Paint or equivalent of J & N/ Berger/Narolac/Birla)

M & L for preparation of old plasterd surface of wall and ceiling apply make the surface smooth by rubbing with emary paper and applying one coats of weather proof paint complete all as specified and directed ( Make : Appex of Asian Paint or equivalent of J & N/ Berger/Narolac)

M&L for 3mm thick one coat of wall care putty on wall all as specified and directed.

Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.

Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.

Supply and Fix 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

Supply and Fixing sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)

Supply and Fixing 3 mm thick figured glass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)

Supply & Fix in repair vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified. (Make: Hindware /Parryware /Cera /Commander)

S&F in rep PVC (SWR) WC connector 110mm dia.

S&F in repair Vitreous China Squatting pan 'Orissa pattern' size 580 x440 mm white with integral foot rest.

S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, and brackets etc complete. (Make: Hindware /Parryware /Cera /Commander)

S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers

Fix in repair sinks made of stainless steel with drainage board 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to drarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x160mm.

Supply and Fix in repairs plate rack made of stainless steel 0.50mm thick,over all size 762mm(H)x787mm(W)x254mm(D) complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets complete all as specified and directed(Make: Hindware/Parry)

Dismantling of floor, hearth or wall tiling including cement mortar bedding

M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding .18 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).

M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles .

M & L for 450 x 350 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).

Glazed ceramic coloured tilles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloure cement to match

M&L 2nd class hard wood in scantling clean swan timber fixed as directed.

Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets

S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces.

S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces.

M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm.

M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Dismantling of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings.

S&F in rep PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls

S&F in rep PVC (SWR) pipes single socketed 75mm dia in any length with rubber ring joints fixed to walls

S&F in rep PVC (SWR) bends any radius, bend 110mm dia with access door

S&F in rep PVC (SWR) junction single, (single T) equal or unequal with access door 110mm dia.

S&F in rep PVC (SWR) bends any radius, with access door 75mm dia.

Taking up or down 15 mm bore steel tubing and connections including cleaning for re-fixing or removal to store all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store all as specified and directed.

S&F in repair 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal)

S&F in repair 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal)

S & F in repairs fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

Supply and fix in repair chromium plated brass Bib cock suitable for 15mm bore GI tubing complete all as specified and directed by Eng-in-charge.

S&F 15 mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for bath showers and kitchen sink, complete all as specified and as directed.

S & F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.

S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.

Supply and fix in repair of 15mm bore brass chromium plated basin mixer unit with all fittings required complete all as specified and directed by Eng-in-charge.

S & F in repair overhead shower rose with Rubit cleaning system with shower arm and flange suitable for 15mm bore GI tubing complete all as specified and directed by Eng-in-charge.

S&F sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket guar and railing 60cm long, fixed in repair.

S&F health faucet of bass chromium plated with 1.5 mtr tube including holder complete all as specified and directed by Eng-in-charge.

S & F in repair chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads, screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified (Make : Jindal/Leader/Scico)

S & F in repair chromium plated 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified

Supply and Fix in repair toilet paper holder supar of brass chromium plated fitted to wall with CP/ brass screws of complete all as specified and directed”

S&F in repair Grating doom 125mm dia with and without wast hole PTMT (Minimum weight 40 grms)

S&F in repair Grating doom 100mm dia with and without wast hole PTMT (Minimum weight 40 grms)

S&F in repair 32mm PVC wast pipe for kitchen sink ,WHB

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m graded stone aggregate as in landings, staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work flat rough finished not exceeding 200mm thick complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level)

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth using extra cement all as specified

M&L for 75mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement

S &F in repair Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S & F in repsair Door closer Aluminium (Die cast ) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete

Supply and fix 30 mm thick 2nd class hardwood plain framed paneled shutters (any numbers of panels) with panel of timber flat on both sides (feather edged) complete including fitted to chowkats

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc

Material and labour for preparation of new or previously untreated surface of wood and wood based materials over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer

S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.

S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed

S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised

S & F 100mm size extruded aluminium alloy handles, fabricated type anodised

S&F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed

S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece

S&F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.

S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed”

Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 10mm thick rendering in cement mortar (1:4) on brick or concrete surfaces of ceiling finished even and smooth without using extra cement.

M& L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specifird and directed.

S & F in Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats

Demolition of precast block walling built in cement mortor

M&L PCC 1:3:6 type C1 as in block masonry with solid blocks exc 10 cm in width and set in CM 1:4.

M&L rendering 15 mm thick on block masonry in CM 1:6 with complete all as specified and directed.

Material and Labour for dismantling of existing water closet after disconnecting the flush pipe, demolition of entire floor up to bottom of sunken portion, removing of debries, cleaning the top of RCC slab in sunken portion including pheripheral surfaces and plastered with 10mm thick cement & sand mortor (1:3) using WPC finished even and smooth w/o using extra cement cured properly and allowed to dry and applying two or more coats of epoxy resin/polymer modified cementatious coating like brush bond of Fosroc or equivalent both on floor and wall surfaces applied all as per manufactureres instructions and plastering the treated surfaces(after testing for water tightness) 15mm thick with CM 1:3 with WPC including providing 20mm dia GI spout with 300mm projection beyond outer face of wall complete all as specified and directed.

Material and labour for Prelaminated particle board 18 to 19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and directed.

Dismantling timber scantling framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section and any positioncomplete all as specified and directed.

M&L for providing 4mm thick 'E' Board in ceiling with galvanized iron snap frame of T Section 24X38x0.70 MM wall/ceiling angle 25x25x0.35 mm thick and hanging with 4mm GI wire all fixed arrangements will be done as per manufacturer instructions incl two coats of oil bound distemper over one coat of white wash with complete all as specified and directed.

M/S Karkies Construction & Co.

M/S DKT CONSTRUCTION

M/S ASHOK CONSTRUCTION

D.P. Traders

M/S POLAR AGENCIES

M/S SUNRISE CONSTRUCTION AND CO

M/S DK TRADERS