Establishment of Moot Court and Interior Furnishing work At New Law College, Indore (M.P.)

Amount

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 22 mm and 37mm, at 900 mm centre to centre, one flange fixed to the ceiling with dash fastener 40/12 12.5 mm dia x 40mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x24x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 900 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12 mm Gypsum Board

Providing and fixing of false ceiling at all heights of 600mm x 600mm x 12mm mineral fibre ceiling tiles RH-90 laid on prelude XL exposed grid systems with 9 mm wideT-Section flanges colour white. The framework comprise of main runner spaced at 1200mm c/c securely fixed to the structural members by approved hangers at1200mm maximum centres. Hangers (GI wire) to be fixed by approved anchor bolt and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees (with double stiching) to be inter locked between main runners at 600mm centeres to from 1200 x600 mm modules. Cut cross tees longer than 600 mm to be supported independently 600mm x 600mm modules tob e formed by fittings 600mm long flush fitting cross teescentrally between the 1200 mm cross tees.Perimeter trim to be wall angle secured to walls at 450mm maximum centres. The job shall include all material,labour, wastages etc.completeMake saintgobain ,armstrong .Rate shall be inclusive of making and finishing cutouts for ac grill, smoke grill lighting fixture etc as directed, necessary scafloding etc as required 6.3.1 15 MM Thick

Providing & fixing of Roller Blind Zebra Design on Window of approved design / Colour ,Windotech,SG ,Vista or Approved Brand 05x2.40x1.60 = 19.20

Providing & fixing of partition / panelling on walls, column, beametc by using ISI plywood frame work using one or two face finsihed as per requienment of 40 x36mm section and 600 mm c/c grid work i/c extra memberat skirting level . Frame shall be treated 5.0% dilute termite (BISENTHRIN) , emulsion sprayed with & the frame work shall be fixed to wall with minimum 1.. mm fully threaded screw and PV rawl Plug . Frame work shall be fixed to wall in straight line and propoer plumnb. Screw used in wall in should properly fixed with M Seal compound and rawl plugs . The job shall include all matrial labour , wastage etc complete. 2.2.1 IS303-1989 GRADE PLYWOOD WORK Less :- Providing and fixing decorative laminate as per ISwith marine grade PVA glue ( fevicol ) applied @ 0 .45 kg per sq mtr to partition , paneling , roof beam or similar places as directed in design and pattern having pin groove . 2.10.2 1.5 mm thk textured finish

Providing Dice 400mm hieght made of 18mm ply grid of 600 x 600mm with top of 18mm duly fixed with screw and step on one side

Providing and fixing in position imported carpet of approved shade and brand 550 GSM PILE WT , GROSS WT 1800 GMS, Graphic loop tile having thickness 7mm-9mm with primary backing of polypropylene wooven sect and secondary action back, complete as per drawings, specifications and as per the direction of architect.Carpet and underlay to be installed with standard fevicol/Dunlop adhesives.The flooring to be installed as per manufacturer’s specifications and to be installed by its authorized agency or as approved, with eighteen months warranty from principals from any manufacturing defects.The installation to be in line and level including the cost of all materials, disposal of debris etc, complete to the satisfaction of architect.(Inclusive of profile)

Dias table 1200 x 600 x 750mm made of postform top 25mm thick with 18mm sides duly postform of approved colour/design

Dias chair Revolving High back made of approved colour Leatherite with fitting mechanism & five legs SS base

Readers / Typing table near the Dias made of 25mm thick top & 18mm side with side Runner of 900mm x 400mm x 750mm

Reader Chair Revolving Mid back of approved colour P.V seat / back foam

Podium for reading the case 1200 / 1150 mm Ht x 600 / 450mm Top made of 18mm MDF duly postform tops of approved colour/design

Providing Chairs SS base 3.4 grade with Leatherite finish of approved colour/design with P.V.Seat / back with P.U. handle

S.S letter ablem of 3 lions on the back of Dias wall 400mm x 350mm

Discussion table 5'x2' size top made of 25mm MDF Postform with 18mm thick postform sides & front of approved colour/design (Note:- The Bidder Shall Qoute his Own Rate for Item No. 1 to 14 of Item Rate Part)

Bidder Name

Amount

ABBOTTSONS IMPEX PVT LTD(GSTN-23AAECA7527R1Z9)