(Nigam Nidhi)Construction of Nala at Shikha Nagar 02 Chouhan Crane Ward No.17 Zone 05 File No.57/26X3/6.2nd Call.

Demolishing stone masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50meters lead as per direction of Engineer-in-charge:

Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed.

Loading and unloading of stone boulder / stone aggregates / sand/ kanker/ moorum. (Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : With 40mm nominal size graded stone aggregate. PCC Grade M 7.5

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses, fillets, columns, pillars, piers, abutments, posts and struts etc.above plinth level and up to floor two level excluding cost of centering, shuttering and reinforcement etc. Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses, fillets, columns, pillars, piers, abutments, posts and struts etc.above plinth level and up to floor two level excluding cost of centering, shuttering and reinforcement etc. Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS :13920; IS 456 & SP : 34) etc. complete.

Steel work in built up M.S. tubular section (round, square or rectangular Hollow tube etc.) trusses/frame work etc./ railing work etc. including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes.

Providing and Laying non-pressure (NP3) RCC socket & spigot pipes with rubber gasket joint including testing of joints 500 MM

Providing and Laying non-pressure (NP3) RCC socket & spigot pipes with rubber gasket joint including testing of joints 300 MM