REPAIRS TO MD/OTM ACCN INCLUDING PLASTERING WORK, FLOORING, DOORS AND WINDOWS, CUPBOARD, PLUMBING WORK, ROOF TREATMENT, ROOF SHEET, STEEL WORK AND PERIODICAL SERVICES TO MD/OTM ACCN IN (AATS) UNDER GE (E) AGRA

Amount

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 Mtr mean radius built in cement mortar 1:6 etc. complete all as specified and directed.

All as per serial item No. 3.00 above, but Except Brick. (Note:-Old brick obtained from demolition and shall be reused after cleaning) Complete all as specified and directed.

Rendering 15 mm thick on other than fair face of brick work in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note : water proofing compound shall be measured separately.

Supply only Integral water proofing compound etc. complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkaliresistant primer and including one coat of 1mm tk Birla/JK wall care putty complete all as specified and directed.

M&L Preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer (self primer)complete all as specified and directed.

M&L for complete removal of existing finishes on old plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing finishes on old plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying two coats of oil bound Distemper over a coat of alkali resistant primer and including one coat of 1mm tk Birla/JK wall care putty complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall and applying one coats of oil bound Distemper complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall and applying one coats of cement base paint complete all as specified and as directed.

Dismantling asbestos cement (corrugated semi corrugated etc) sheets in roof covering complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

M&L Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Dismantling of mild steel cast iron work of any description in any position complete all as specified and directed.

S&F framed work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming Fe 410 gde E250 fixed complete all as specified and as directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down Shutters of any description n, exceeding 1.0 Sqm each complete all as specified and directed.

Taking down Shutters of any description exceeding 1.0 Sqm and n exc 2 Sqm each complete all as specified and directed.

S&F Pressed steel frames size 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 35mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class II (Hollock) kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F steel windows with side hung shutters incl Box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters incl Box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 50mm x 47mm made out of 5mm colour (wood grain) PVC sheet reinforced with MS square tube , supplying and fixing in opening kitchen abinet complete all as specified and shown in drawings complete all as specified and directed.

Factory made Solid PVC door shutter 30 mm thick (style) consisting of solid panel wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading inside stiles and rails and decorative PVC beading of 10mm x 10 mm (90 ) frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded decorative colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification etc. complete all as specified and directed

S&F 100 mm long Butt hinges, heavy weight, cold rolled mild steel complete all as specified and as directed.

S& F 150 mm Aluminium handles, cast type, anodised fixed complete all as specified and directed.

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.etc. complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 100 mm long butt hinges, medium weight, coled rolled mild steel and fixed etc. complete all as specified and directed.

S&F 75 mm long butt hinges, medium weight, coled rolled mild steel and fixed etc. complete all as specified and directed.

S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 200mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 125 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 150mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed.

S&F 125mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed.

S& F Floor door stopper of 140 mm aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor including cover plate and rubber piece complete all as specified

S&F in repair 25mm dia PVC coated metallic fancy type of approved finish curtain rod including brackets and fancy type end knobs rings etc complete all as specified .

M&L for external teak wood lipping 6mm tk &10 to 20mm wide fixed with nails on block boards etc as in cupboard shelve kitchen cupboard etc complete all as specified and directed.

M&L in repair for 18/19mm tk Particle board, grade 2 quality. Interior grade, commercial type fixed with nails to timber frame work as in cupboard shelves, kitchen ,cupboards as etc complete all as specified and directed

M&L in repair for Pre-laminated particle board,18/19mm tk interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails/screws to timber frame work as in cupboard/shelves complete all as specified and directed.

S&F in repair 40mm dia cupboard knobs fixed with nut screws each and washers of mild steel, brass polished complete all as specified and directed.

S&F in repaire100 mm long butt hinges, medium weight, coled rolled mild steel and fixed etc. complete all as specified and directed.

S&F in repaire 75 mm long butt hinges, medium weight, coled rolled mild steel and fixed etc. complete all as specified and directed.

S&F in repaire 200mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F in repaire 125 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F in repair 150mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed.

S&F in repaire 125mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed.

S&F in repair Floor door stopper of 140 mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including cover plate and rubber piece complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 12.5mm graded stone aggregate) in bed plates, fixing of hold fast, kerbs and for press steel door frame like including necessary formwork complete all as specified and directed.

Preparation of new painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide etc. complete all as specified and directed.

Preparation of new painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer etc. complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level) built in cement mortar. etc. complete all as specified and directed.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing and plinth protection etc. complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store.etc. complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store etc. complete all as specified and directed.

Supply & fixing 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking down existing pipe complete all as specified & directed.

All as per serial item No. 65 above, but 20mm bore complete all as specified and directed.

S&F 16mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 including all plain fitting and fixed complete to walls, ceilings, floors or laid in floors complete all as specified and directed.

Supply and Fixing 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 including all plain fittings and fixed complete to walls or laid in floors complete all as specified and directed.

Supply & fixing in repairs three layered rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including dismantling existing water tanks complete all as specified & directed.

S&F in repairs 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I including dismantling of existing tank and removing to store/ issued under schedule of credit complete all as specified and directed

S&F in repair 20 mm dia PTMT ball valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 20 mm dia Gun -metal, globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply & fixing in repair 15mm bore bib taps cast copper alloy chromium plated with long shank, crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, fixed in repairs complete all as specified & directed.

S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply & fixing PVC connections of 450mm long of PRYAG Make suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fix in repairs Vitreous China Squatting pan “ORISSA PATTERN” size- 580x440mm white with integral foot rest complete including provn of lime concrete bedding complete all as specified and directed

Supply & fixing in repairs PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supplied and fixed in repair vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, waste coupling complete all as specified & directed.

Supply & fix in repairs pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

S & F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) including fixing to steel pipe or union complete all as specified and directed

S & F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed .

S&F in repair 110 mm bore PVC (SWR) pipe, waste, rain water pipe and vent pipes single socketed in any length with rubber ring joints fixed to walls, floor etc. as per site requirement making good disturbed portion to match the existing complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) branch piece single (single Y) equal or unequal with access door complete all as specified and directed .

S& F in repair 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 mm PVC (SWR) junction single (T single) equal or unequal with acess door. complete all as specified and directed

S&F in repair PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors, wall complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) bends any radius with acess door complete all as specified and directed .

S&F in repair 75 mm PVC (SWR) branch piece single (single Y) equal or unequal with access door complete all as specified and directed.

S&F 75 mm PVC (SWR) junction single (T single) equal or unequal with access door complete all as specified and directed .

S & F in repair 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Dismantling/ demolition of polymeric water proofing membrane single layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of material and debris away from the site etc complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting and including water proofing compound @ 2% by weight of cement complete all as specified and directed.

Material and labour for applying 15 mm thick plaster in CM 1:4 including water proofing compound @ 2% by weight of cement finished even and smooth complete all as specified and directed.

M & L for Provn of polymeric water proofing roof treatment to non assessable RCC roof described as under and all as specified :- (a) Preparing RCC roof surface and applying one coat of bitumen primer @ Rs. 0.30 Kg /Sqm (b) Applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm (c) Laying of water proofing teratment with 3mm thick APP modified polymeric water proofing membrane with non woven polyster mat of weight 160gms/sqm as centre core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s all as specified. (d) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane. (e) Applying two coats of aluminium paint @ 100 gm /sqm ( each coat) .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Non-skid joint less coloured ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tiles exceeding 0.11 but n exc 0.18 sqm, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed .

M&L for coloured glazed ceramic tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

SahaDevSingh Constructions

3Krishna Enterprises

m/s shanti consruction co

Mahendra Enterprises

SHRI RADHAYSHYAM JHA

VARDMAN ENTERPRISES

Attar Singh and Sons