Renovation works of Civil Engineering department building at UBDT, College of Engineering, Davangere

Renovation works of Civil Engineering department building at UBDT, College of Engineering, Davangere

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials to the appropriate disposal area stacking serviceable and unserviceable materia...

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...

Corridoor (F.F)

Out Side plastering

Taking out existing windows wooden door, shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as ...

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.

Formwork For Staging. Centering & Scoffoding 50 percentage for Demolishing Roof slab

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC Bathroom, cold applied ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

I st floor Corridoor (F.F)

Providing 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...

Providing & fixing of 2track x 2panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elasto...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Concrete for flooring

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed grade...

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

I st floor- Corridoor(F.F)

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two coat applied at 1.67 ltr per 10 m square over and including priming coat of exterior primer applied at 2.20 kg per 1...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two coats on new work over an under coat of suitable shade with ordinary paint of appr...

WATER SUPPLY AND SANITERY

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush ...

Providing and fixing in position brass stop cock of approved quality 25mm nominal bore including cost of all Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved ma...

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 25 mm nominal bore to IS:8931

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linkin...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. Complete

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125 x 85 x 5.5 mm (heavy type)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtures and...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing unplasticised PVC connection pipe with brass union 15mm nominal bore 450mm length of PVC connection including cost of all materials, labour and HOM of equipments with all leads co...

Supplying heavy gauge PVC conduit pipe Dia Mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceili...

b)32mm dia 2 mm thick

c)40mm dia 2.5 mm thick

First Floor a) 25mm dia 2 mm thick

b)32mm dia 2 mm thick

c)40mm dia 2.5 mm thick

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2 x 1.5mm square (Phase & Neutral) & 1 x 1.0 mm square (Earth wire) FRLS multi strand PVC ...

b) Medium Point up to 3 Mtr up to 6 mtr from tapping point to out let via switch box

c) Long Point above 6 mtr upto 10 mtr from tapping point to out let via switch box

First Floor a) Short Point up to 3 Mtr from tapping point to out let via switch box

b) Medium Point up to 3 Mtr up to 6 mtr from tapping point to out let via switch box

c) Long Point above 6 mtr upto 10 mtr from tapping point to out let via switch box

Supplying heavy gauge PVC Conduit Pipe dia thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...

b)32mm dia 2 mm thick

c)40mm dia 2.5 mm thick

First Floor a)25mm dia 2 mm thick

b)32mm dia 2 mm thick

c)40mm dia 2.5 mm thick

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Ground Floor a) 6Amps one way

b) 6 Amps 3way socket

c) Stepped Fan Regulator

d) 6Amps Bell push

e) 16 Amps one way switch

f) 32 Amps DP Switrch

g) 6/16A Universal Socket

h) TV/Telephone Socket

First Floor a) 6Amps one way

b) 6 Amps 3way socket

c) Stepped Fan Regulator

d) 6Amps Bell push

e) 16 Amps one way switch

f) 32 Amps DP Switrch

g) 6/16A Universal Socket

h) TV/Telephone Socket

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

First Floor a) 1-3 Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing ...

First Floor a) 1 -3 Module

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

First Floor a) 1.5 sqmm

Supplying and fixing of T8 36/40W Fluorescent Tube with 36W power consumption with initial lumen of 2750 (3000 deg K / 4000 deg K) with rated avg life of greater than 10000 hrs. Operating volta...

Supplying and fixing of 5 feet - 80 W of T8 Fluorescent Tube with 54W power consumption with low 3mg Mercury content less phosphor coating Operating voltage range from 180V to 265V, 50Hz AC power Sup...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374 - 1979 and withdouble ball be...

Supplying And Fixing S Hook made out of 14 mm dia M.S. Rod. First Floor

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, r...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

Extra length of GI pipe of class B 19mm dia for down rod.First Floor

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete First Floor

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. First Floor

Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. First Floor

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. First Floor

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40 mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required First Floor GI Strip

First Floor GI Strip

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single ...

First Floor GI Strip

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ...

First Floor 6-32 A DP

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection ...

First Floor 16 SWG

Fabricating supplying and mounting MS box made out SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front c...

First Floor 16 SWG

Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

250 A 4 x 30 x 10 mm Aluminium Strips

First Floor 100 A 4 x 30 x 6 mm Aluminium Strips

250 A 4 x 30 x 10 mm Aluminium Strips

Supplying and fixing angle iron frame work fabricated out of M.S angle iron and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.Gr...

First Floor 75 x 75 x 6 mm

Supplying of LT UG Cable having alluminiun conductor PVC insulated, Sheathed, Galvanized, Steel Wire/steel tap armoured cable with PVC outer Sheathing 1.1KV class 1) Class A PVC CableGround Floor 3.5 ...

First Floor 3.5 Core

Labour Charges for Laying of 1.1 KV class UG Cable when supplied agency in existing trench GI pipe/ stoneware pipe /on wall/ on pole as required

a) Ground Floor

Digging of Trench of 0.6m Deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete Ground Floor - trench

Supplying, fixing and wiring 0 to 600V 96 x 96mm AC Voltmeter on existing panel/wood board. Ground Floor

Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT Ground Floor

Supplying, fixing and wiring rotary selector switch suitable for Ammeter Ground Floor

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter Ground Floor

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. Ground Floor

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz , 12/24V D.C. Ground Floor

Supplying of on load change over switches 4 poles, AC 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) Ground Floor

Supplying and drawing UTP-CAT 6E LAN cable. Ground Floor

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947. Ground Floor

Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703. Ground Floor

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947. Ground Floor