PWD/BWN/Rs.6.54 lacs/Special repair of Primary Health Centre at Village Biran in Bhiwani Distt.

Amount

Earth work in excavation in foundations, trenches, etc.in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers withcompaction, including disposal of all surplus soil, as directed within a lead of 30 metres HSR(6.6)

Dismantling white or coloured glazed tiles (to be carefully removed) HSR(8.38). Outer side of Room

Cement Concrete 1:8:16 with stone aggregate 40mm nominal size in foundation and plinth. HSR(10.28)

Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work but excluding steel-reinforcement centring and shuttering in foundation and plinth. HSR(10.79+10.95(a)

Providing and laying 80mm thick I.S.I. marked interlocking paver blocks of all shapes and colours in design mix cement M-40 over a bed of 30mm thick fine sand complete in all respect. HSR(10.159).

First class brick laid in cement sand mortar 1:4 in foundation and plinth. HSR(11.4)

Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including ointing in white cement mixed with pigment of matching shades complete. (b) Size of ceramic Glazed tiles 300 x 450 mm of reputed manufacturer like:- RAK, NITCO, KAJARIA, SOMANI, JOHNSONS, ORIENTBELL shall be used as approved by Engineer-in-charge. [HSR 14.92(b)].

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade. HSR(16.3)

Applying priming coat with metal primer on new steel or iron work including preparation of surface. HSR(16.9)

Steel work in hip and jack rafters, common rafters, purlins, etc., with angle iron cleats and other connecting plates welded including cost of cutting & welding rods. HSR(18.6).

Fee-500 TMT Steel for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete. HSR(18.22).

Supplying and fixing Glass panes including special metal sash putty of approved make. (b) glass panes 5 mm thick, exceeding 40 sq. dm areas. [HSR 18.30 (b)].

Providing steel pipe I.S.I. mark in columns with 2 Nos M.S. plates welded on both ends of the pipe including cutting etc., complete fixed in position. HSR(18.41)

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing in cement (HSR 8.5(b)

Preparation of plastered surface for distempering including sand papering the surface, applying filling with approved quality filler, consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete. HSR(16.51).

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. HSR(16.60)

Providing two coats of exterior acrylic emulsion paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). [HSR 16.79 (b)].

White washing two coat HSR(16.47).

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. HSR(16.1).

Painting two coats with readymixed paint in all shades on old wood work to give an even shade including rubbing down old paint. HSR(16.6).

Painting two coats with ready- mixed paint for metallic surfaces in all shades on old steel or iron work. HSR(16.18).

Providing and laying 150mm thick granular sub base consisting of filter layer confirming to Table 400.1 Grading-III of MoRT&H 5th edition, mixing in a mechanical mix plant at OMC, carriage of mix material to the site of work, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve desired density complete as per clause No.401 of MoRT&H specifications. (NS)

Providinng and fixing Zink coated or Colour coated profile 2mm thick for shed with 'J' or 'L' Hooks with bitumen washer (NS)

SUBHASH

SANJAY DALAL

Krishan Kumar, Contractor

Amit Aggarwal S/o Sh. Krishan Kumar