Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹11.6 L+₹1.0 L (9.89%)Rejected-Finance | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹11.8 L+₹1.2 L (11.8%)Rejected-Finance 254 MG ROAD LAMBA LANE JUNGLIGHAT PORT BLAIR SOUTH ANDAMAN ANDAMAN AND NICOBAR ISLANDS 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹13.2 L
EMD Value
₹26,300
Closing Date
14 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Amit Kumar, AE QS C
Garrison Engineer South RK Gram Diglipur North Andaman 744202
PROVISION OF UNDERGROUND WATER STORAGE TANK AT LAXMIPUR (REVENUE WORK) AND PROVISION OF FALSE CEILING IN NEW PORTA CABIN OLD OTM COMPLEX AT DIGLIPUR (MINOR WORK)
2023_MES_581074_1
8908/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer South
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer South
₹26,300
Yes
28 Mar 2023
15 Feb 2023
16 Mar 2023
15 Feb 2023
14 Mar 2023
1 Mar 2023
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil.
Excavating over areas, not exceeding 1.50 m deep and getting out in any type of soil.
Excavating over areas, exceeding 1.50 m deep and not exceeding 3 m deep getting out in any type of soil.
Excavating over areas, exceeding 3 m deep and not exceeding 4.50 m deep getting out in any type of soil.
Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/ loose soil.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/ loose soil.
Removing excavated soil material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.
M&L for PCC Type D2, 1:4:8 (using 40mm graded granite stone aggregate) as in foundations, filling and mass concrete.
M&L for RCC M-30 (design mix) (using 20mm graded crushed granite stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
M&L for RCC M-30 (design mix) (using 20mm graded crushed granite stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses.
M&L for RCC M-30 (design mix) (using 20mm graded crushed granite stone aggregate) as in dome slab and the like.
M&L for providing steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for flat rough finished surfaces of concrete all as specified.
M&L for providing steel formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, for flat rough finished surfaces of concrete all as specified.
M&L for high yield strength deformed TMT steel bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for high yield strength deformed TMT steel bars 6 mm to 8 mm dia as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for high yield strength deformed TMT steel bars 5 mm to 10 mm dia cut to length, bent to shape required, as in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.
Supply only Integral waterproofing compound
M&L for rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or concrete surfaces, mixed with integral water proofing compound @ 3% by weight of cement, finished even and smooth (without using extra cement) complete all as specified.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete.
M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces.
M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
Supply, fabricate, fix aluminium alloy ladder including all joining materials for fixing etc. complete all as specified and as per design, size and shape directed by the Engr-in-Charge.
S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.
S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde-E-250) quality-A.
M&L for PVC water bar 150mm wide in construction joints.
M&L PCC Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) as in copings, cills, benching of manholes, kneelers, apex stones, bed plates, levelling course, kerbs water troughs and the like including use of formwork, weathering, slightly rounded or chamfered angles and throating.
Supply, providing and fixing 4 mm thick non asbestos fibre cement building boards fixed in ceiling with size of grid 605x605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding walls using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.90 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 mtr length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.
KML CONSTRUCTION
Kakolil Trade Agencies
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .