Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹56.2 LAccepted-AOC GRAM PUNAI DARU HAZARIBAGH | ₹56.2 L | 1 | Accepted-AOC WORK ALLOTTED TO INDRADEV PURUSHOTTAM CONSTRUCTION PVT. LTD., VILLAGE - PUNAI, P.S. - DARU, DISTRICT - HAZARIBAG AND AGREEMENT DONE |
| 2 | 2₹56.3 LRejected-AOC GRAMS GOTIYA PADMA HAZARIBAGH | HAZARIBAGH | JHARKHAND | 825301 | ₹56.3 L | 2 | Rejected-AOC WORK ALLOTTED TO INDRADEV PURUSHOTTAM CONSTRUCTION PVT. LTD., VILLAGE - PUNAI, P.S. - DARU, DISTRICT - HAZARIBAG AND AGREEMENT DONE |
| 3 | Rejected-Technical GRAM ROMI POST PELAWAL HAZARIBAG | HAZARIBAG | HAZARIBAG | JHARKHAND | - | - | Rejected-Technical TECHNICALLY NOT QUALIFIED |
| 4 | Rejected-Technical N A | FARIDABAD | HARYANA | 121004 | - | - | Rejected-Technical TECHNICALLY NOT QUALIFIED |
Tender Value
₹58.4 L
EMD Value
₹1.2 L
Closing Date
5 Jan 2026, 4:00 pmClosed
EXECUTIVE ENGINEER, W. W. DIV. NO. 02, HAZARIBAG
EXECUTIVE ENGINEER, W. W. DIV. NO. 02, HAZARIBAG
Upgradation Work of New Primary School Konhar under Katkamsandi Block, District - Hazaribag
2025_WRD_108309_1
04/2025 - 26 DMFT (Group-01) (2nd Call)
Open Tender
Civil Works
180 days
KATKAMSANDI, HAZARIBAG
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
₹1.2 L
26 Mar 2026
29 Dec 2025
6 Jan 2026
29 Dec 2025
5 Jan 2026
29 Dec 2025
Labour for site clearance and scrapping old paint etc.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges.
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick.
Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.
Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
Providing and laying 25mm thick kotah stone slab flooring of approved size texure and colour over 19mm thick base of lime mortar (1:1:1) (limeputty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish all complete as per building specification and direction of E/I. Size of Tile 600x600 mm
Providing and laying 25mm thick kotah stone tiles in risers of steps skirting and pillars of approved size texure and colour laid over 12mm thick cement mortar (1:3) and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red, Area of slab over 0.50 sqm.
Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing , polishing and cost of curing taxes and royalty all complete as per building specification and direction of E/I. With A grade white tiles
Supplying, fitting and fixing 20 gauge G.C.I. sheet gate fitted on. M.S. angle frame of size 60 x 60 x 6mm -do- -do- all complete as per specification & direction of E/I.
Supplying, fitting and fixing fully glazed steel door, window or ventilations of standard rolled 'Z' and mullion steel sections and size -do- -do- all complete as per specification & direction of E/I.
Supplying, fitting, and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.
Providing 12mm thick Cement Plaster (1:4) with 1.5mm cement punning -do- -do- all complete as per specification & direction of E/I.
Providing and fixing pressed steel door frames conforming to IS : 4351 , manufactured from commercial mild steel sheet of 1.60mm thickness , including hinges, jamb , lock jamb , bead and if required angle threshold of mild steel angle of section 50x25mm ,or base ties of 1.60mm pressed mild steel welded or rigidly fixed together by mechanical means, including MSpressed butt hinges 2.5mm thick with mortar guards , lock strike- plate and shock absorber as specified and applying a coat of approved steel primer after pre- treatment of the surface as directed by E/I : profile B, fixing with adjustable lugs with split end tail to each jamb
Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved mak+B50e conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed Portion : Powder coated aluminium (minimum thickness of powder coating 50 micron)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.0 mm thickness
Renewing ply proof wire netting in door and windows with fly proof screen all complete as per specification and direction of E/I
Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface all complete as per building specification and direction of E/I.
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
Providing two coat of synthetic enamel painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
Making plinth protection 50mm thick of cement concrete 1:3:6 over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted, finishing the top smooth.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board, 610x510 mm bowl depth 200 mm.
E/W in excavation in foundation trenches in ordinary(vide classification of soil item- A + B)and disposal of excavated earth as obtained to a distance upto 50m including all lifts wuth levelling, ramming the foundation trenches removing roots trees shrubs all complete job as per approved design, buiding specification and direction of E/I.
Providing course clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thik with all leads and lifts including cost of all materials labours royalty and textures all complete as per building specifications & direction of E/I.
Providing designation 75B one brick flat soling joint filled with local sand including cost of watering taxes , royalty all complete as per buiding specification and direction of E/I.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
Providing 75B brick work in C.M. (1:6) in super structure -do- -do- all complete job as per specification and direction of E/I.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Providing TMT steel reinforcement 8mm dia rods to 10mm dia -do- -do- all complete as per specification and direction of E/I. 8mm dia -
10mm dia -
12mm dia -
Earth work filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from exacavation of foundation trenches with in laid of 50 m and lift of 1.5 m all complete job as per buiding specification and direction of E/I. ( mode of measurement compacted volume)
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding, curing and taxes all complete as per building specification and direction of E/I.
Supplying angle as per I.S. 226 75 x 75 x 8 mm (Gr. A)
Supplying angle as per I.S. 226 50 x 50 x 6 mm (Gr. A)
Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I.
Supplying welded steel wire fabric (Wire Mesh)
Labour for fitting & fixing G.I. woven wire fencing including fixing of post in cement concrete at 2.5 M centres including cost of staples (but excluding the cost of cement concrete angle iron post, its cutting and making holes, nuts and bolts) all complete as per building specification and direction of E/I.
Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20 x 6 mm M.S flats or 16mm M.S square bars fitted on 25 x 5 x 6mm M.S angle frame of size 60 x 60 x 6mm -do- -do- all complete job as per specification and direction of E/I.
Providing two coats of painting with ready mixed paint over a coat of primer of red lead paint over steel surface -do- -do- all complete job.
Providing designation 75B brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.
Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases.
Providing 12mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.
Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.
Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt. not less than 350 grams) with extra socket all complete as per specification and direction of E/I.
Providing and fixing brass / C.I. stop cock of approved quality all complete as per specification and direction of E/I. 15mm dia Brass Stop Cock
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20mm dia
32mm dia
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes.
Providing 12 mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l.
WGPVCPT - Wiring for light poit / fan point / exhaust fan point / call bell point with 1.5 sq. mm. F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet, suitable size M.S. box and earthing the point PVC insulated copper with 1.5 sq. m with taxes all complete as per approved design, drawing and electrical specification and direction of E/I. Group-B
Wiring for sub main wiring with the following size of PVC insulated copper conductor single core cable in surface/recessed PVC conduit etc. as required with taxes all complete as per approved design, drawing and electrical specification and direction of E/I. 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire
2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire
Supplying, fitting and fixing of following size of PVC conduit with accessories in surface etc. as required with taxes all complete as per approved design, drawing and electrical specification and direction of E/I. 25mm PVC conduit
32mm PVC conduit
32mm PVC conduit
Supplying, fitting and fixing of metal box of 150mm x 150mm x 60mm size etc. as required with taxes all complete as per approved design, drawing and electrical specification and direction of E/I. 75mm x 75mm x 50mm
147mm x 93mm x 47mm
121mm x 173mm x 48mm
Supplying, fitting and fixing of following size piano type switch and socket on the existing switch box/cover including taxes all complete as per approved design, drawing and electrical specification and direction of E/I. 5/6 amp switch
3 pin 5/6 amp socket outlet
Supplying and fixing brass batten/angle holder including connection etc. as required.
S/F/F of surface mounted LED Tubelight - 20/22 watt
Supplying and fixing of 9" (230mm) Exhaust Fan
Supplying and fixing of 48" (1200mm) Ceiling Fan
Supplying and fixing of holder type LED - 9/10 watt
200x165x125mm dia borewell - Supplying all materials, labours, tools & equipments for drilling -do- (a) from 0.00 m to 50.0m
(b) from 51.0m to 200.0m
Supplying, all tools tackles & lowering of 200 mm dia MS ERW casing pipe of 6 mm wall thickness including welding charges. Cost of pipe etc. all complete job.
Supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per direction of E/I.
Supplying labour and equipments including 200mm dia. M.S. Cap and fitting and fixing over the tube well properly and taking it out as per direction of E/I.
Providing and fixing suitable size threaded mild steel clamp for borewell of 200mm dia -do-
S/F KIRLOSKER/CRI make 1.5HP submersible pump set having 100m, including all taxes, royalty etc. all complete job as per direction of E/I.
(b) Starter 5HP
Supplying fitting and fixing 3 core 2.5mm2 flat copper submersible cable FINOLEX/HAVELS make including all taxes,royalty etc all complete job as per direction of E/I.
Supplying all tools, labours, equipments for lowering 32mm dia P.V.C. pipe in 3 mtr. length in the drilling bore of tube well etc. all complete job as per direction of E/I.
Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I. (i) Cement
(ii) Sand
(iii) Stone Chips
(iv) Steel
(v) Bricks
Goods & Services Tax (G.S.T.) @ 18%
Labour Cess @ 1%
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.21 MB
BOQ_146240.xls
BOQ • 0.43 MB
TENDER_DOCUMENT_04_01_2ND.pdf
Tender Documents • 15.03 MB
Download all tender documents and submit your bid