Proposed Annual Tender For Fabrication Work For Indapur Municipal Council Indapur Dist Pune

Amount

Providing and errecting chain link fencing 1.6 metre height with galvanised iron chain link of size 50 x 50 milimetre 8 guage thick and fixed 75 milimetre above Ground level on vertical Mild Steel Angle of 40x40x6 milimetre size including excavating pits for foundation and embeded in cement concrete block of 1:4:8 mix of size 450x450x670 milimetre at 1.75 metre center to center with iron bar 16 milimetre diameter as hold fast including welding link with angle frame at 30 cm. c/c nuts and bolts and horizontal Mild Steel Angles at top and bottom of 25x25x5 metre size and vertical Mild Steel flat 35 x 5 metre and 25 x 5 metre horizontal including cross support of 40x40x6 metre Angles both sides at every corner or bends embeded in concrete blocks of 1:4:8 of size 450x450x670 milimetre including 3 coats of oil painting etc. complete.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and fixing collapsible steel gate in one/ two leaves with hot rolled vertical channels of 18 x 9 x 3 mm. minimum size, crossings of M.S. flats of size 18 x 5 mm. T or E section for runner of minimum 40 x 6 mm. size for flange, M.S. flat for top runner of minimum size 40 x 12 mm. with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm. max. spacing of vertical channels be 100 mm. enclosed gate position and clear space of 150 mm. between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer & oil painting etc. complete. (I.S. 10521-1983).

Providing and fixing M.S. grill door 24 kg/sqm. of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 milimetre with lock plate of 3.15 milimetre thickness reinforced with 35 x 35 x 5 milimetre angle section fitted with sliding bolts and handles for both sides, deep Mild Steel channel section of depth and thickness not less than 65 milimetre and 3.15 milimetre respectively with hold fast arrangments, Mild Steel Bracket plate 300 x 300 x 3.15 milimetre minimum size and shape with square bar suspension shaft of minimum 32 milimetre diameter, hood cover of Mild Steel sheet not less than 0.9 milimetre thickness and of any size at top and safety devices including mechanical gear operation arrangementconsisting of worm gear whwwls and worms of high grade cast iron or mild steel and one coat of red lead primer complete. (I. S. 6248 - 1979) without mechanical gear.

Providing and fixing crimped wire G.I. mesh of size 20 mm x 20 mm of 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etc. complete. (excluding cost of structural steel).

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm. with lock plate of 3.15 mm. thickness reinforced with 35 x 35 x 5 mm. angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm. and 3.15 mm. respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm. minimum size and shape with square bar, suspension shaft of minimum 32 mm. diameter, hood cover of M.S. sheet not less than 0.9 mm. thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (With mechanical gear)

Providing and fixing collapsible steel gate in one/ two leaves with hot rolled vertical channels of 18 x 9 x 3 mm. minimum size, crossings of M.S. flats of size 18 x 5 mm. T or E section for runner of minimum 40 x 6 mm. size for flange, M.S. flat for top runner of minimum size 40 x 12 mm. with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm. max. spacing of vertical channels be 100 mm. enclosed gate position and clear space of 150 mm. between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer & oil painting etc. complete. (I.S. 10521-1983).

Providing and fixing partition of welded mesh of 3 mm. diameter wires 50 mm. x 25 mm. size mesh including integrated non teak seasoned wood frame 80 x 50 mm. of vertical and horizontal scantling and finishing with oil painting three coats etc. complete

Providing and errecting 1.2 metre high wire fencing with five rows of barbed wire supported on Mild Steel Angles (50 milimetre x 50 milimetre x 6 milimetre) at 2.5 metre, centre to centre including excavating pits for foundation, fixing post in cement concrete block of 1:4:8 of size 45 x 45 x 45 centimetre, fastening the wire and painting the Mild Steel Angles with one coat of red lead primer and two coats of painting complete.

Providing and fixing acrylic plastic sheet panels 3.00 mm thick of approved quality in required thickness plain clear or any colour or obscured linings in lieu of glass pans to doors/ windows including providing and fixing clips, putty etc. complete.

Providing and fixing 50 mm. x 50 mm. Mild Steel square pipe framed steel windows of various sizes as per details with welded square bars 12 mm. at 10 cm. center to center without hot dip zinc coating without/ with ventilator including fabrication, glazing with plain/ obscured glass panes of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete.

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg./sq.m.as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providing and fixing mild steel grill work for windows, ventilators, etc.15 kg/sq.m as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

Removing wire fencing with iron/ cement concretefencing posts and stacking the materials as directed with all leads, lifts complete.

Removing iron pipe railing having wooden Reinforced cement concrete or cement concrete or iron posts and stacking the materials as directed.

Providing and errecting 1.5 metre high wire fencing with seven rows of barbed wire supported on Mild Steel Angles (50 milimetre x 50 milimetre x 6 milimetre) at 2.5 Metre, centre to centre including excavating pits for foundation, fixing post in cement concrete 1:4:8 of size 45 x 45 x 45 centimetre, fastening the wire and painting the Mild Steel Angles with one coat of red lead primer and two coats of painting etc. complete.

Providing and errecting 1.5 metre high wire fencing with seven rows of barbed wire supported on wooden post of specified size at 2.5 Metres, centre to centre including excavating pits for foundation, fixing post in cement concrete 1:4:8 block of concrete of size 45x45x45 centimetre, fastening the wire and painting the precast poles in two coats etc. complete.

Providing and erecting structural steel for sakav with all bracing gusset plates etc. as per detailed design and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connection and oil painting with 2 coats of approved quality and shade etc. complete

Providing gas or Electrical welding for structural steel section, plates as per detailed drawing. For less than 10 milimetre thick section

S.H.KALE(GOV. CONTRACTER)

VIJAY ARUN BANSUDE

Devgiri Enterprises,