GE/ALP (8572) KOLKATA OF 2025-26

Amount

M & L for repairs to pot holes any depth, not exc 1.00 sqm each including sweeping free from dust and mud, or water , scoring in road , path ,etc cutting around edges to at least 25 mm in depth , making good by filling in screened and graded road metal, wateriing and well ramming (including supply of road metel ) complete all as specified and directed.

All as per item No.1 but making good by applying tack coat @ 5kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per10 sqm, blinded with 0.09 Cum of stone chippings, 6.3mm size and again rammed (including supply of premixed macadam, binder and chippings ). depth of pothole exc 30mm using Paving bitumen complete all as specified and directed.

M&L for preparation of existing black top surfaces including scarifying or picking gravelled exc 50mm and n exc 100mm deep macadam or bituminous macadam surface in area exc 400Sqm by brushing with wire brush for removing caked mud etc sweeping with brooms and finally fanning the cleanned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

Material and labour for Paving bitumen applying evenly a priming/tack coat with bituminous primer @ 10 Kg per 10 sqm of road surface using paving bitumen complete all as specified and directed.

Material and labour for applying evenly a priming/tack coat with bituminous primer @ 5 Kg per 10 sqm of road surface using paving bitumen complete all as specified and directed.

M&L Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) Binder content 4% by weight of total mix of paving bitumen any penetration etc. complete all as specified and directed.

M&L for providing premix carpet 20mm consolidated thickness with 0.27cum of stone chippings mixed with 14.60kg of binder (paving bitumen) rolled and consolidated to required gradient and camber, withExc 8 tonne & n.exc 12 tonne power roller complete all as specified and directed.

M&L for applying evenly a tack coat over the existing bituminous surface @ 5 Kg per 10 Sqm (20/30 bitumen) and providing and laying 25 mm thick Mastic Asphalt on prepared surfaces strictly in accordance with IS 1195 of 1978 (as latest modified) with mastic (ie bitumen of grade 20/30) @8.98 Kg mixed stone dust ( lime stone powder with calcium value 80%0 @ 0.016 Cum and stone chipping of size 12.5 mm and 10 mm @ 0.0192 Cum and sand @ 0.008 Cum Per Sqm with bitumen of grade 20/30, and finally providing stone aggregate of size 20 mm @ 0.005Cum per Sqm, mixed with 0.017Kg per Sqm of bitumen of grade 20/30, for anti skidding including all material labour tools and plants etc complete all as specified and directed.

S&F in repair Solar cat eye Aluminium alloy shall (100% water proofing design according to 65) of size 125mmX125mmX25mm (Shank 65mm of high efficiency Mono rystfie solar panel 2.4V/ 0.3 watt one Ni-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10000 to 18000 mcd complete all as specified and directed. Make:- Dark Eye model DA 971-P, DA 110 (DHRUV) or equivalent Tata BP Solar/ Protex GP /Oscar safety Solution/ ABS Engineering/3M as approved by GE

S&F cat eye solar reflective type of metal body alloy of size 100mm x100mm x20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instruction complete all as spesified and directed. Make:- Dark Eye model DA 971-P or equivalent Tata BP Solar/ Protex GP /Oscar safety Solution/ ABS Engineering/3M as approved by GE

S&F in repair of plastic speed bump of 750mm lengthX 250MM widthX 75 MM hight and made of ABS material with 2 nos high reflective reflectors moulded in PMMA and fixed with 4 nos nail and epoxy adhesive (base bumper & hole) on road surface complete all as specified and as per manufacturer's specifications. Make: MODEL no DA-1006 of Dark Eye or equivalent model of OSCAR SAFETY SOLUTION/abs ENGINEERING/3M.

Providing and applying 2.5mm thick road marking strip (retro-reflective) of specificed shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, drive by experienced operateron road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil,grease and forigen material etc. complete all as a directed by engr-incharge and according with applicable specification complete all as specified and directed. Make : STP Limited (Shalimark/Shalimark W), SNI Infratech Pvt Ltd (ESN E5with special applicator machine all as per manufacturers instruction TRMP), Maruti B-itumen Pvt Ltd (MARUTI REFLO MARK)

M&L for Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry and laid dry and pointed complete all as specified and directed

Demolition of cement concrete (unreinforced) of any descriptions, below or above Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and as directed.

Material and Labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed.

Material and Labour for laying silver sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and Labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment complete all as specified and as directed.

fixing Only the existing interlocking paver block any shape and size complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of new concrete surfaces over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in surface channel and drains including necessary formwork complete all as specified and as directed.

Material and labour for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds, mi-tred/stopped ends etc complete all as specified and as directed.

All as per item No 23 here in before but add or deduct for each 25mm girth or part there of over or under 30cm complete all as specified and directed.

Material and Labour for brick work with sub class 'B' brick straight of curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

All as per item no 25 here in before but except brick complete all as specified and directed.

Material and Labour for Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed.

Material & labour for rendering 15mm thick in CM (1:4) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth using waterproofing compound complete all as specified and directed.

Liquid water proofing compound complete all as specified and directed.

Demolation of cement concrete (reinforced) in any position (below or above G.L) etc complete all as specified and directed

M&L for providing factory made 75 mm thick Circular precast RCC Manhole cover slab of 5 MT load bearing capacity confirming to IS : 12592 (Grade M-35) including raising of the level of existing manhole to match the road surface level using cement concrete type C1 (20mm graded stone aggregate) and removal dimolition of old broken drain cover and PCC complete all as specified and directed.

M&L for providing factory made 75 mm thick Circular precast RCC Manhole cover slab of 15 MT load bearing capacity confirming to IS : 12592 (Grade M-35) including raising of the level of existing manhole to match the road surface level using cement concrete type C1 (20mm graded stoge aggregate) and removal dimolition of old broken drain cover and PCC complete all as specified and directed.

M&L for providing factory made 75 mm thick precast RCC cover slab of 3 MT load bearing capacity confirming to IS : 12592 (Grade M-30) including removal dimolition ofold broken drain cover complete all as specified and directed.

M&L for providing factory made 75 mm thick precast RCC cover slab of 5 MT load bearing capacity confirming to IS : 12592 (Grade M-30) including removal dimolition ofold broken drain cover complete all as specified and directed.

Supply and fixing in repair convex mirror of 900 mm dia pole mounted on MS heady grade pipe of 50 mm dia duly powder coated with anti-rust, anti theft and 1.2 metre high from GL with 300 mm (minimum) embedded in and including PCC M-10 using 40 mm graded stone aggregate and two coats of paint by hot pressing over a coat of red oxide around the pipe in full perimeter all as per MOST and IRC specifications complete all as specified and as directed. Make: Dark eye/ Oscar Safety Solution/ ABS Engineering/ 3M

Material and labour for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc and the like n. Exc. 10 cm wide on roads pavement with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instructions complete all as specified and as directed.

Mateial and labour for applying evenly a priming / tack coat with bituminous primer @5 Kg per 10 Sqm of road surface using paving bitumen and complete all as specified and directed.

M & L for providing and laying 30 mm thick Mastic Asphalt on prepared surfaces strictly in accordance with IS 1195 of 1978 (as latest modified) with mastic (ie bitumen of grade 20/30) @ 8.98 Kg mixed stone dust ( lime stone powder with calcium value 80%0 @ 0.016 Cum and stone chipping of size 12.5 mm and 10 mm @ 0.0192 Cum and sand @ 0.008 Cum per Sqm with bitumen of grade 20/30, and finally providing stone aggregate of size 20 mm @ 0.005 Cum per Sqm, mixed with 0.017 Kg per Sqm of bitumen of grade 20/30, for anti skidding including all material labour tools and planrs etc complete all as specified and as directed.

Material and labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to ID 15658-2006 M-40 Grade with grey cement and pigment complete all as specified and directed.

Demolition for reinforeced cement concrete as in cover slab or equivalent works including cutting reinforcement to facilate demolition complete all as specified and directed.

M&L for Rendering 20 mm thick in two layers (Top 10mm thick rendering coat mixed with water proofing compound shall be laid over 10mm thcik plastered surface) with CM (1:4) on of brick work or concrete surfaces finished the surface even and smooth without using extra cement to match the existing surface complete in all respect as specified and directed. Note: WPC shall be measured and paid separately

M&L for Rendering 15 mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface fair & even without using extra cement to match the existing surface all complete all as specified and directed.

Supply only Integral water proofing compound complete in all respect as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 2mm thick wall care putty on new surfaces complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of acrylic distemper over a coat of alkali resisting primer and over of 2 mm wall care puty complete all as specified and directed.

M&L for formwork to flat rough finished surfaces of concrete sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for formwork to flat rough finished surfaces of concrete sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Demolition of reinforced Cement Concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for RCC type B1 (1:2:4) (20mm graded stone aggregate) Nominal mix as in Beams, cantilevers, bressummers, lintels etc complete all as specified and directed.

M&L for mild steel TMT bars of 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Mild steel plates,Fe 410-W(Gde-E-250) quality-A plain or chequered, 5mm thick or over in thickness in available sizes complete all as specified & as directed

S & F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5 cm to 30 cm long (dia of neck 16 mm to 20mm) complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for Steel work in tubular trusses, posts,rafters, struss, angle etc including special shaped washers etc. complete using ERW or induction butt welded tubes incl preparation surfaces and applying one shop coat of Zinc chromate primer paint etc complete all as specified and directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10 cm width or girth after preparation complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling floor,earth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L Anti-skid/non skid joint free ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.06sqm but n.exceeding 0.11 sqm in toilet/bath floor etc.set and jointed with epoxy with spacers complete all as specified & as directed. Note: Screed bed shall be measured and paid separately

M&L for glazed ceramic (coloured) tiles of size (450x300, 6-7)mm thick as in vertical surface/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L backing coat/Screed bed or bedding layer of mortar 10 mm thick in cement mortar (1:4) as in vertical surface/dado complete in all respect as specified and directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr deep for foundation etc. n. exc 10 Sqm on plan and n. exc 1.5 mtr deep and getting out in loose/soft soil complete in all respect as specified and directed.

Returning filling including spreading, leveling, watering in layers n. exc. 15cm in any type of soil complete all as specified and directed.

Removing excavated soil to a distance exc. 50 mtr and n. exc 250 mtr from starting point complete all as specified and directed.

Hard core of gauge in exc. 63mm broken stone boulders deposited and spread and levelled in layers in.exc. 15mm thick complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and as directed.

Taking down of Chowkhat with shutter (without taking of shutter) door / window/ ventilator area n.exc 1.5 Sqm complete all as specified and directed

Taking down of Chowkhat with shutter (without taking of shutter) area exc 1.5 Sqm but not exc 4.0 Sqm complete all as specified and directed.

S&F Solid PVC Moulded Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and complete all as specified and directed.

S&F Factory made solid panel PVC Moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and complete all as specified and directed.

S&F UPVC Louvers type ventilator assembled partially with PVC exhaust fan of 200mm sweep and partially fixed with frosted glass of area n.exc 0.5 sqm including all necessary fittings complete all as specified and directed.

S&F 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Bearing hinges 100mm, cast brass, with Stainless steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) type B2 (40 mm graded stone agg) as in flooring, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B1 (20 mm graded stone agg) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed.

Taking up or down 25 mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete with all fittings complete all as specified and directed.

S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc complete with all fittings complete all as specified and directed.

S&F 20 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.

S&F 20mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.

Dismantling cast iron or re-inforced concrete drain pipes of 100mm bore, jointed in cement mortar complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete in all respect as specified and directed.

S&F 110mm bore PVC(SWR) pipe bend single socket complete in all respect as specified.(upto 12 storey High of building)

S&F 110mm PVC (SWR) WC connector bent type complete all as specified & as directed.

S&F in PVC (SWR) vent cowl 110 mm dia complete in all respect as specified and directed.

S&F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal complete in all respect as specified and directed.

S&F PVC (SWR) 110 mm bore junction double, (double T) equal or unequal complete in all respect as specified (upto 12 storey High of building).

S&F in repair vitreous China wash down water closet pan ( pedestal pattern) incl PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe etc. complete all as specified and directed.

S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approved by GE complete all as specified & directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed.

S&F in repair half stall Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repair PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete in all respect as specified and directed.

S&F in repair SS toilet paper holder with chromium plated brass screws complete in all respect as specified.

S&F in repair 32 mm PVC waste pipe 900 mm long with complete all as specified and directed.

S&F in repair 15 mm dia stop valve cast copper alloy fancy type chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S & F in repair 15 mm Dia CP Bib taps (Two-in-one), fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm dia angle valve, chromium plated, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions, complete all as specified and directed.

S&F in repair 15 mm bore Brass CP Health faucet screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair Chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair steel floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including jointing with solvent cement of 100 mm dia complete all as specified and directed.

S&F in repair brass CP towel rail, fancy type, 60cm long between flanges complete all as specified and directed. Make: Cera cat No-F5006103 or equivalent make as approved by GE

M&L in repair rotational moulded polythylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including 20 mm brass valve high pressure with polythene float and fly nut complete and GI tank nipple, screwd for iron pipe complete all as specified and directed.

M&L Chequered cement concrete tiles area exc 0.09 sqm but not exc. 0.16 sqm,set, jointed and pointed in neat cement slurry in floors with grey cement in equal proportion & no pigment over 15mm thick screed bed with CM (1:6) complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-l smooth finished, and reforming benching as required complete all as specified and directed.(internal dia of pipe 150mm)

M&L for 75mm thick PCC (1:3:6), type C2, using 40mm graded stone aggte as in plinth protection / paving, surfae finished even & smooth with using extra cement as complete as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for suspended false ceiling (Decorative Type) system using metalic (E grid) exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 32 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner) Cross Tee of dimensions 26mm X 24mm x 0.8 mm thick, wall angle 22.00mm x22.00mm x 0.35 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm) with and including 6 mm thick HPSC ( High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system duly suspended with 2 mm dia G I bars hangers fixed with steel dash through fasteners with Provn of light fixture complete all as specified and directed.

M/S SRINIVASA CONSTRUCTION (BID ID -3474761)

MODERN AGENCY (BID ID -3474779)

DIPAK ENTERPRISE (BID ID -3475767)

DGR CONSTRUCTION (BID ID -3474845)

M/S L.R.ENTERPRISES (BID ID -3476475)

M/S. CHAKRABORTY ENTERPRISE (BID ID -3475579)

SRI BHOOMIJ INFRAPROJECTS & SERVICES LLP (BID ID -3476101)