PROVN OF ONE TOILET BLOCK REPAIR SHED AND SPL REPAIR TO BLDG NO P 140 AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

M&L for Earth work in excavation in any type of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed.

M&L for providing plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and directed.

M&L for Moorum /red bajri filling in floors or pavings,laid in layers n exc 15 cm thick ,spread,levelled and rammed including watering complete all as specified and directed.

M&L for Earth filling in floors or pavings except sand , filling under floors or in foundations including watering and consolidation for the same soil excavated complete all as specified and directed.

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with fair finished surfaces with rough finished surfaces complete all as specified and directed.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT Mild steel bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) as Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) as Columns, pillars, piers, posts and struts

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide and fair finished surface complete all as specified and directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for rendering on roof surface 10 mm thick in CM 1:3 mixed with water proof compound as per manufactures instruction and finished even and smooth (WPC will be meassured separately) complete all as specified and directed.

M&L for APP based polymeric membrane , 3mm thick and weighing not less than 3 kg/Sqm reinforced with non woven polyster matt black finished weighing not less than 150 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300 N/Sqm 10 cm side lap & end lap 15 cm over coat of bitumen primer @ 0.40 ltr/Sqm(density at 25 C in the range of 0.87 -0.89 kg/litre and viscosity of 72 to 160 CPS) by torch application and two coat of aluminium paint applied in top of felt all as specified & directed complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even using water proofing compound complete all as specified and directed.. Note: Water proofing compound shall be paid under separate item.

M&L for 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) internal plaster complete all as specified and directed.

M&L for cement plaster 5mm thick in CM 1:3 on ceiling etc finished even and smooth without using extra cement complete all as specified and directed..

M&L for Preparation of newly plastered surfaces of wall and applying three coats of white washing including preparation of wall surfacase complete all as specified and directed. .

M&L preparation of newly plastered / un-plastered surfaces of wall and applying three coats of whitewash on ceiling complete all as specified and directed.

M & L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L 100 mm thick hard core of broken stone boulders of gauge n.exc 63mm deposited spread levelled watered and rammed to a true surface complete and all as speciied and directed.

M&L for for 75 mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) laid in panels in plinth protection as required and finishing the surface of complete incl necessary form work complete all as specified and directed.

M& L 100 mm thick cement concrete 1:3:6 type C-2 (40 mm stone agg) as in sub base finishing cement concrete even amd smooth without using extra cement complete all as specified and directed..

M&L 25 mm thick average Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in floor complete all as specified and directed.

M&L non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for coloured glazed cermic tiles size 300x450x7 mm thick on vertical surface of wall over and including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white cement/coloured cement to match the tiles complete all as specified and directed.

S&F GI tubing medium grade including all fittings fixed to walls and ceilings or laid in floors as directed 15mm bore pipe complete all as specified and directed.

S&F GI tubing medium grade including all fittings fixed to walls and ceilings or laid in floors as directed 25 mm bore pipe complete all as specified and directed.

S&F in vitreous china squatting pan "Orissa' pattern size 580x440 mm & 'P' or 'S' type ,white with integral foot rest complete all as specified and directed.

S&F for vitreous china wash down water closet pan / padestal pattern white with following accesseries and including taking down existing vitreous china wash down water closet pan complete all as specified and directed.: - (a) PVC seat cover with fixing bolts. (b) JET CP steel for EWC Spray.

S&F Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level white with inlet, ball valve, float and handle including brackets,complete all as specified and directed.

S&F vitreous China wash hand basin of size 550x450mm with CI bracket and comprising of the following complete all as specified and directed. :- (a) Waste fitting 32mm dia brass chromium plated with long screwed shanks and fly nut flange end bedded in red lead cement and other end fixed. (b) 20mm Pillar tap cast copper alloy with capstan head chromium plated, screwed down, high pressure with or without leltered hot or cold with long screwed shank and fly nut. (c) PVC waste pipe 32mm dia 600mm long. (d) PVC Connection 15mm size with PTMT nuts of length 450mm long.

S&F bib tap, 15mm bore, chromium placed screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F CP fancy type stop valves/Angle valves screwed down high pressure, with crutch butterfly handle screwed both ends for iron pipe or for unions and fixed to 15mm bore dia pipe.complete all as specified and directed.

S &F chromium plated shower roses with or without swivel joints, 125mm in size including fixing to steel pipe or union complete all as specified and directed.

S&F in brass CP soap dish fancy type complete all as specified and directed.

S&F in brass CP toilet paper holder fancy type complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D Type, including bracket complete all as specified and directed by Engr-charge. Make: Cera/ Jaquar/ Hindware / Johnson /prayag or equivalent.

S&F in tubular towel ring brass chromium plated, 20mm dia, fixed with chromium plated brass screws complete all as specified and directed. Make: Cera/ Jaquar/ Hindware / Johnson or equivalent.

S&F in health faucet turbo with 1 mtr SS tube& ABShook complete all as specified and directed.

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S/F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hosisted and fixed in position.of capacity 1000 ltrs complete all as specified and directed.

S&F in PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore pipe complete all as specified and directed.

S&F in PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors 110 mm bore pipe complete all as specified and directed.

S&F in PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors 75 mm bore pipe complete all as specified and directed.

S&F stack clamps out of 50mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal with access door for 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius with door 110 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius with door 75 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) vent cowl suitable for 110mm bore pipe complete all as specified and directed.

S&F 75 mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 105x60 mm single rebates pressed steel frame chowkat 1.25mm thick for doors with one rebates including necessary fixing lugs hinges lock strike plattes etc complete all as specified and directed.

S&F second class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels of timber flate on both sides, with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces the size of rail and stile as per IS 1003 (Part-I) klin seasoned and chemically pressed treated complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. Make : Rajshri or equivalent such as Sintex, Polycon etc

S&F solid PVC door frame of size 50 x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing complete all as specified and directed..

S&F aluminium tower bolt 150mm long complete all as specified and directed.

S&F aluminium handle 150mm long complete all as specified and directed.

S&F butt hinge size 100mm extruded aluminium alloy with galvanized Mild steel hinges, pin andonised and fixed type complete all as specified and directed..

S&F 250 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed..

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 150mm long complete all as specified and directed.

S&F 150 mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil patty in Square n.exc 0.50m Sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass pin headed type and glazing with oil putty insqure n.exc 0.50 each pan complete all as specified and directed.

M&L 18 to 20 mm thick granite stone slab machine cut bedded and jointed with grey cement slurry and pointed with white cement or coloured cement to match the colour of granite for WHB platform/window cills over 20mm thick screed bed in cement mortar (1:4) including grinding, polishing, rounding edge etc complete all as specified and directed.

M & L for preparing new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed.

M&L preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M&L for Earth work in excavation in any type of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M & L for 10mm thick plastering in cement mortar 1:4 on brick wall surfaces and finishing the surface even & smooth without using extra cement and water proofing compound as per manufacturers instruction complete all as specified and directed. Note:- WPC shall be measured and paid separatly

Supply only liquid wate rproofing compound complete all as specified and directed.

M & L for cement concrete 1:2:4 type B1, 20mm graded stone aggregate as in lintels upto 1.50 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings, copings, kneelers, apex stones, bed plates, kerbs not provided for roof, water troughs and the like including weathering, slightly rounded or chamfered angles, throating and manhole channels directed including formwork complete all as specified and directed.

M & L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

S & F for 16mm dia mild steel round bars for handles of manhole cover and rungs of manhole complete all as specified and directed.

S & F for precast reinforced cement concrete cover slab of manhole (casted in cement concrete type B1, 1:2:4 using 20mm graded aggregate) and set in cement mortar 1:6 complete all as specified and directed.

M & L for cement concrete bed 1:4:8 type D2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

S & F 150mm bore reinforced cement concrete pipes, class NP2 one end socketed laid in trenches, set and jointed in cement mortar 1:1 complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new 150 mm internal dia drains pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L RCC M-30 (Design Mix) as in raft foundations, footings plinth beams, Roof beams bases for column and base slabs complete all as specified and directed.

M&L RCC M-30 (Design Mix) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L RCC M-30 (Design Mix) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

All as per Srl Item No. 07 above but 6 to 8mm dia bars for stirrups complete all as specified and directed.

M& L 100 mm thick cement concrete type D-2, 1:4:8 (40 mm stone agg) as in sub base finishing cement concrete even amd smooth without using extra cement complete all as specified and directed.

M&L 40 mm thick PCC type B-1, 1:2:4 using 20mm graded stone agg as in levelling course in floor complete all as specified and directed.

S&F Steel work in tubular (Square/rectangular hollow section) in trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F structural Steel work in Plates including necessary high strength bolts of 25mm dia for fixing of ISMB in RCC column (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment complete all as specified and directed.

S&F structural Steel work in Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed.

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Excavation in any type of soil for post holes (or similar holes) each n.exc 0.5 cum getting out, and removing the soil beyond 50 mtr including spreading levelling complete all as specified and directed.

S & F mild steel angle iron posts and struts in fencing including cutting tops to shape directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) and all necessary drilling, for bolting or riveting, etc.,and similar work complete all as specified and directed.

Supply only mild steel round bars 10mm dia as line wires for chain link fencing. Note :- Cutting to length bend to shape in ends required including binding with MS wire included in item No.106 here-in-after.

S & F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm long and dia of shank 5 to 10 mm complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type. Note :- Fixing is covered under item No. 106 here-in-after.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S&F structural steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed.

M&L for Demolition of brick work or stone/boulder masonry,built in cement mortar or cement lime mortar portions ordered to be dismantled complete all as specified and directed.

M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Dismantling boarding including frame work, any description, fixed in any position with nails complete all as specified and directed.

Taking up or down 15mm steel tubing and connections etc complete all as specified and directed.

Taking up or down 20mm steel tubing and connections etc complete all as specified and directed.

Taking down unserviceable chowkhat or frame with shutter (without taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 Sqm each complete all as specified and directed.

Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc cement or cement lime plaster complete all as specified and directed.

M&L for Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid,bedded and pointed in any mortar complete all as specified and directed.

M&L for Dismantling plain or corrugated steel/FRP sheeting,any gauge,thickness including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L for Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) and refixing in same position complete all as specified and directed.

M&L cement concrete type C-2 (1:3:6) 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L pre-cast cement concrete block Type C1 1:2:4 masonry with solid blocks, exc. 10 cm in width and setting in mortar CM (1:6), complete all as specified and directed.

M&L for Plastering 15mm thick in CM (1:4) s on stone wall surface finishing the surface even & smooth with out using extra cement complete all as specified and directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm screed bed in CM (1:6) complete all as specified and directed.

M&L glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement over a coat of 10mm thick CM(1:4),slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed bed 20mm thick in CM(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L coloured machine pressed cement concrete tiles 25cm x 25cm x 20/22mm thick set jointed and pointed in neat cement slurry in floors,with grey cement and pigment and cut and polished over 20mm thick screed bed CM(1:6) complete all as specified and directed.

M & L for Preparation of new plastered surfaces of wall priming plastered and other surfaces with alkali resistant primer and applying two coats of cement base paint complete all as specified and directed.

M & L for Preparation of old painted surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

M & L for Preparation of old painted surfaces of wall and applying two coats of white wash complete all as specified and directed.

M & L for Preparation of old painted surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M & L for preparation newly plastered surfaces on wall & applying a layer of wall care putty 3 mm thick(averaging) on wall surfaces including cornices etc for proper levelling of plaster and two coat of oil bond distemper over a coat of primer complete all as specifed and directed.

M&L for complete removal of existing treatement of walls and prepare the wall surface with wall care putty and than applying a coat of primer and over it applying two coat of distemper oil emulsion white or tinted complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F anodised aluminium grill(anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern,with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws@200mm centre to centre,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F Mortice lock vertical type of size 100mm Brass 4 levers complete all as specified and directed.

S&F Rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins, post where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates GDE Fe410-W(Gde-E-250) quality B complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&Fixed in repair 16mm outer diameter dia CPVC pipe SDR 11 & plain CPVC SDR 11 fitting in trenchs/wall fitting complete all as specified and directed.

S&Fixed in repair 20mm outer diameter dia CPVC pipe SDR 11 & plain CPVC SDR 11 fitting in trenchs/wall fitting complete all as specified and directed.

S&F 4.00mm thick sheet glass ordinary quality and glazing with oil patty in Sqm exc 0.50 Sqm in each pane complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

M&L for Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&Fixed in repair single socketed 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&Fixed in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) couplers complete all as specified and directed.

S&F 110mm PVC (SWR) 'P’ trap complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent complete all as specified and directed.

S&F in repair 15mm stop valve/angle cock chromium plated cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs bib tap, 15mm bore, fancy type, brass chromium plated screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair vitreous China wash hand basin of size 550x450mm with CI bracket and comprising of the following complete all as specified and directed :- (a) Waste fitting 32mm dia brass chromium plated with long screwed shanks and fly nut flange end bedded in red lead cement and other end fixed. (b) 20mm Pillar tap cast copper alloy with capstan head chromium plated, screwed down, high pressure with or without leltered hot or cold with long screwed shank and fly nut. (c) PVC waste pipe 32mm dia 600mm long. (d) PVC Connection 15mm size with PTMT nuts of length 450mm long.

S&F in repairs 20mm dia aluminium anodised tubular Curtain rail wooden finish along with 8 Nos rings for per Running meter complete all as specified and directed.

S&F in repairs brackets of Aluminium anodised for 20 mm curtain rod complete all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granitecomplete all as specified and directed.

S&Fixed in repair 18/19mm particle board, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws to timber/Aluminium frame work complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, brass polished complete all as specified and directed.

S&F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

M&L for Mirror polishing on marble/granite/Kota stone work where ever required to give high gloss finish complete all as specified and directed.

Taking down carefully the existing unserviceable batten/conduit/concealed type aluminium point wiring for light, fan, socket 5 Amps and15 Amps complete removing the same including fittings/fixtures and making good the disturbed surfaces of walls, floors, ceiling etc complete all as specified and directed.

Taking down unserviceable main switch/DB, Teak wood boards etc complete all as specified and directed.

Taking down fan, cealing/exhaust cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

Taking down submain wiring of any size complete all as specified and directed.

Taking down of light fitting of any type complete all as specified and directed.

M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS)including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, including necessary modular metal flush box/pressed steel terminal boxes and modular white cover plate/ 3 mm thick ISI marked laminated sheet cover and SS screws with cup washers for fixing switches, sockets, fan regulators etc. including making good disturbed surfaces if any with cement mortar 1:3 for fixing switches/sockets/regulators etc. for one light point controlled by one switch complete all as specified and directed.

All as per Srl Item No 170 above but for one fan point controlled by one switch.

All as per Srl Item No 170 above but for one Exhaust fan point controlled by one switch.

All as per Srl Item No 170 above but for one 3 pin 5 Amps socket outlet point on independent board

All as per Srl Item No 170 above but for one 3 pin 5 Amps socket point on the same board with other switches

All as per Srl Item No 170 above but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket.

All as per Srl Item No 170 above but with cable 4 sqmm including 4 sqmm cable as earth wire for 15/16 amp socket.

Supply and fix single pole and neutral enclosures with a two pin and earth plug and socket complete with one double pole MCB 10 A ,240 V complete all as specified and directed.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and directed

Supply and fix socket outlet 2in1, 3pin,5A complete all as specified and directed.

Supply and fix socket outlet 2in1, 3pin,6/16 A complete all as specified and directed.

Supply and fix switch piano flush type single pole one way 15 Amps complete all as specified and directed.

Supply and fix ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed.

Supply and fix step type electronic fan regulator flush type, 230 volt, AC complete all as specified and directed.

S&F MCB single pole, 240 volts 6 to 32 Amps, 'C' curve complete all as specified and directed.

S&F MCB single pole and neutral 06 to 32 Amps, 240 Volts, 'C' curve complete all as specified and directed.

S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed.

Supplying and fixing of ceiling fan, white/ivory 1200 mm sweep, 3 wings suitable for operating on AC 220/230 volts single phase, 50hz supply with down road complete, min air delivery 210 CFM with service value 6.00 BEE, five star rating, with brushless direct current motor (BLDC) including necessary PVC insulated flexible wire 3 core for connecting from ceiling rose to connector complete all as specified and directed.

Supply and fix exhaust fan 300 mm sweep steel body with louvre complete fixed to wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible copper conductor cable 24/0.2mm , Metal exhaust fan complete all as specified and directed.

M&L sub main wiring concealed type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run o f 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

S & F LED batten suitble for indoor application 20 W, 4' length , wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in replacement recess mounted low glare LED panellight 2'X2' size 36 watt white/warm white for armstrong/grid ceiling or similar ceiling mounting system complete prewired using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade complete all as specified and directed. Make: BAJAJ/Wipro/Crompton/Havells

M & L lamp holder (Angular) PVC/poly carbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply & fix LED lamp 10 W , min lumen output 950 lumens at 6500 K CCT for batten holders complete all as specified and directed.

S & F in replacement LED 25 Watt street light fitting for bldg secutiry complete with light grade GI brackets, Nuts, bolts with complete with all accessories internaly pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable for wall mounting as specified and directed. Make - Crompton/ Havells/ Philips/Bajaj.

M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth lead wire of 4.00 mm dia by means of bolts, nuts check and washers of G I or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and CI cover, connecting earth lead wire from test point to DB complete all as specified & directed

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories including necessary pressed steel terminal boxes flushed in wall and 3 mm thick ISI marked laminated sheet cover and SS screws with cup washers for fixing switches, sockets, fan regulators etc. including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light /CB point controlled by one switch complete all as specified and directed.

All as per Srl item No 196 above but for one exhaust fan point controlled by one switch.

All as per Srl item No 196 above but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches.

All as per Srl item No 196 above but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket point.

S & F LED batten suitble for indoor application 10 W, 2' length , wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S & F LED light fitting 1X9 W bulkhead luminaires with lamp holders etc complete with all aceessories including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.

Supply and fix electric water heater, storage type ABS body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. Make: Racold/AO smith/Crompton Qube IOT

Supply and fix exhaust fan 250 mm sweep with louvre plastic body complete fixed to window/wall with suitable fastening and connecting up including provision of cable from connector to fan with flexible copper conductor cable 24/0.2mm complete all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M deep and getting out in soft and loose soil complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for sand cushioning for under ground cables, spread in trenches, river sand including cleaning, spreading levelling, punning for laying/cushioning of cable all complete all as specified and directed.. with layer of 8 cm deep before laying cable and 15 cm depth after laying and stretching the cable complete all complete all as specified and directed. Note: For the Purpose of payment puned thickness shall be measured.

Supply and laying un-reinforced precast concrete cable cover, class LV, Type 1 flat, size 250 mm x 150 mm x 40 mm as mechanical protection to underground cables laying with length of the cable cover across the trench complete all as specified and directed.

Supply & Fix GI pipe light grade 40 mm dia for cable protection laid in trenches under road/culvert etc complete all as specified and complete all as specified and directed.

Supply & Fix GI pipe light grade 40 mm for cable protection fixed to poles/bldg incl two Nos MS clamps made to shape out of 25 x 3mm MS flat and painting incl bolt, nut, washer etc complete all as specified and directed.

Supply and Laying, connecting all testing and commissioning of XLPE insulated, earthed, screened, PVC bedded, galvanised steel strip or wire armoured electric (heavy duty) with stranded aluminium conductor 1100 volts grade cross sectional area of 16 sqmm 4 core complete all as specified and directed. Note: 1. Exacavation, earth work, sand, bricks and PCC will be measured and paid under relevant items.

Supply, laying and connection of GI pipe medium grade with all fittings laid in trenches including testing complete all as specified and directed of 25 mm dia size complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid separately

Supply & Lay new GI tubing medium grade galvanised with all fitting and fixed complete to walls and ceillings or laid in floors all as directed of 20 mm bore dia complete all as specified and directed.

Drilling & tapping cast iron water mains (in position) for branch connection of the internal dia 15 mm complete all as specified and directed.

M.D. CONSTRUCTION CO.

M/s Malinath Electricals