Repairs to joinery, plastering, flooring, plumbing and misc repairs for 172 MH, LAO, Int office and 315 Fd Hospital incl md accn under AGE B/R-II, GE Gurdaspur.

Amount

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as specified and directed.

All as per Srl item No 03 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 02 shall be reused after necessary cleaning of mortar)

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement complete all as specified and directed

All as per Srl item No 06 above but in CM 1:6.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed

Taking down cement plaster/deteriorated concrete from bottom of RCC Chhajja/RCC facia/RCC beam/RCC slab/brick work including racking out joints, hacking for key, scrubbing down with water (at a bldg height upto 4.50 mtr) and removing rubbish to a distance exceeding 50mtr but not exceeding 100mtr away and M&L for 15mm thick plaster in CM 1:3 finished even and smooth without using extra cement on bottom of RCC Chhajja & RCC facia complete all as specified and directed by Engr-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar

Use and waste of form work to Chullah hoods, chajjas, weather shades, corbels, water troughs,shelves and similar items including edges rough finished surfaces of concrete complete all as specified and directed

S&F mild steel TMT bars 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roofs ,Shelves incl demolition complete all as specified and directed.

M & L for Marble work 18-20 mm thk (table rubbed and polished) in steps, jambs, pillars window cills , cooking platforms , stair case and like in cement mortar ( 1:4) incl pointing in white cement ( 1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed and approved by Engg-in-charge

Demolition of PCC any description and in any position not otherwise specifically provided for incl disposal of rubbish to a distance n xc 500 mtr where complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in plinth protection Finishing cement concrete surface even and smooth w/o using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4 type B-2 (using 20mm graded stone aggregate as in path/hardstanding Finishing cement concrete surface even and smooth w/o using extra cement complete all as specified and directed.

Demolition of plain cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 m but not exceeding 100 m away to low lying areas complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in sunken floor in CM 1:4 with water proofing compound finish even & smooth complete all as specified and directed. Note : WPC should be paid separately.

M&L for APP based polymeric membrance minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gm/sqm) laid on primed surface by forced application complete all as specified and directed. (Priming shall be paid separately).

M&L for applying evenly a tack coat of Industrial bitumen 85/25 at the rate of 1.2 Kg per sqm. including cleaning of surfaces complete all as specified and directed

Supply only integral water proofing compound.

M&L for plain cement concrete 1:7:12 type F-2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sunken portion complete all as specified and directed

S&F Non skid ceramic light coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 and taking down of old existing treatment & plaster, scrubbing down with water and disposing off the wastage to low laying areas to a distance exceeding 50 Mtr but not exceeding 100 Mtr away complete all as specified and directed .

S&F glazed ceramic dark coloured tiles 300x200mmx6 to 7mm/ 450 x 350 x 7 mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface and taking down of old existing treatment & plaster, scrubbing down with water and disposing off the wastage to low laying areas to a distance exceeding 50 Mtr but not exceeding 100 Mtr away complete all as specified and directed.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:4 & complete all as specified and directed.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

All as per Srl item No 28 above but size of opening exceeding 1.5 Sqm but not exceeding 4 Sqm.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.

Taking down Shutters of any description of size exc 1.5sqm but not exc 4.0 sqm complete all as specified and directed.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm double rebated comprises of glazed & gauged skelton shutter of (required no of gauged shutters and glazed shutters) ERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 (four Nos for each window) including following fittings welded to the frame shutter :- Ref Drg No CE JZ/TD-06/07 (i) Hold fast,150mm long of 12mmX3mm made to shape-04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per window (iii) MS Tower bolt 150mm long-02 Nos per window (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per window (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEJZ/TD-1020/06 (vii) M S guard bar 12mm square bars @120mm C/C fixed horizontly.

S&F MS box type window/ventilator fixed type with glazing bar without wire work and glass as per Drg No CE JZ-70/06-07 dated 07.06.07 with guard bar including two coats of synthetic enamel paint to steel surface with red oxide primer after prepration of surfaces complete all as specified and directed

S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with single or double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.

S & F anodised aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified.

S & F anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 10mm thick PVC insulation panels with EPS stuck to 1 mm printed PVC sheet suitably placed in aluminium door as per specification and drawing

S&F Sheet glass, 4.8mm thick ordinary quality, in squares, exceeding 0.50 sqm in each pane fixed with glazing clip, rubber packing, anodised aluminum snap beading on both sidefor fixing glass panes in frame complete all as specified and directed.

S&F 32 mm thick both side laminated flush door shutter, veenered face or as decided by GE complete all as specified and directed.

S&F IInd class hard wood glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

S&F factory made solid panel pvc door shutter 30 mm thick ( style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails & bottom rail;Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work incl primer conform-ing to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

Hacking out old broken glass from wooden/ steel window cleaning the surface and removing from the site complete all as specified and directed.

S&F sheet glass, 3mm thick, ordinary quality, in squares, not exceeding 0.50 Sqm in each pane fixed with oil putty complete all as specified and directed.

All as per Srl item No 47 above but figured glass pin head type & glazing with oil putty .

S&F mild steel sliding door bolts 300mm long stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete all as specified and directed.

S&F mild steel barrel tower bolts, 150mm size, stove enamelled black, with bolt complete all as specified and directed

S&F 150mm long mild steel pressed handle, oval type, stove enamelled complete all as specified and directed

S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. Size 150mm.

S&F in 100mm long butt hinges, medium weight, cold rolled mild steel and fixed.

S&F floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm.

M&L in repair Prelaminated particle board size 18/19mmm thick, interior grade, prelaminated one side with decorative choice lamination &other side balancing white lamination, fixed with screws to timber frame work fixed in repair

M&L in repair prelaminated particle boards, exterior grade, prelaminated one side with decorative choice lamination &other side balancing white lamination, fixed with screws to timber frame work fixed in repair

S&F continuous (Piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed. Width of flaps (when open) 40 mm.

S&F 100mm long Hasp and staple , safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F in repair 300 mm long, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fix in repair door closer hydraulically regulated aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F in repairs MS pipe 20mm bore, powder coated chromium plated with fixing brackets stops rollers including fancy type knobs two Nos to each curtain rod complete all as specified and directed.

S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 complete all as specified Note:- Flush pipe and flushing cistern to be measured and paid separately.

S&F in repairs vitreous china wash down water closet pan pedestal pattern, coloured, including fixing bolts with PVC 'P' trap( excluding flushing cistern and flush pipe ) complete all as specified and directed.

Supply only plastic water closet seat cover coloured /white with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S & F in repair CP steel flushing jet including pipe for European type closet of suitabe length with brass check nut complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket complete all as specified and directed.

Supply only flush pipe of polythylene of low or high density or PVC, 32mm dia for low level cistern complete all as specified and directed.

S&F in repair Vitreous china wash basin,white flat back,size 630x450mm excluding taps,waste,chain and plug and porcelain stopper but including brackets, CP waste coupling

S&F in repair pillar taps 15mm, cast copper alloy but fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs vitreous china urinal , half stall type, with all necessary fitting complete all as specified & directed.

S&F in repairs urinal waste pipe fixed complete all as specified & directed

Dismantling water tanks exc 250 Ltr & not exceeding 500Ltr and S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

All item as per SI item No 75 above but 1000 ltr capacity.

Taking up or down 15mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed.

Refixing 15mm dia steel tubing and connection in new or old position (in wall ceiling floors etc) complete all as specified and directed.

S&F 15mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.

Taking up or down 20mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed.

Refixing 20mm dia steel tubing and connection in new or old position (in wall ceiling floors etc) complete all as specified and directed.

S&F 20mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S&F in repair bib taps 15mm dia chromium plated fancy type long body with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and directed.

S&F in repairs chromium plated angle valve 15mm bore fancy type screwed down for high pressure complete all as specified and directed.

S&F in repair for 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed complete all as specified and directed.

S&F in repair brass chroumium plated shower rose 125mm size complete all as specified and directed.

S&F in repairs 100mm dia CP grating with or without hinge type or hole type complete all specified and directed.

S&F in repair ball valves 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms.) complete all as specified and directed

S&F in repair 15mm bore bib taps standard of PTMT any colour screwed, for iron pipe and fixed complete all as specified and directed.( Minimum weight 15 mm- 90 gms/20mm-25 gms.

S & F in repair 15 mm pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms))

S & F in repair 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-90gms)

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge

S&F 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joint, fixed to walls including taking down eaves, gutters rain water pipes (any size or pattern) including all fittings complete all as specified and directed by Engineer-in-charge

S&F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

All as per Srl item No 96 here in before but 75mm bore.

S&F 110mm bore PVC (SWR) junction single/double, (single/ double T), equal or unequal with access door complete all as specified and directed.

All as per Srl item No 98 above but 75mm bore.

S&F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with access door complete all as specified and directed.

S&F 75mm bore( SWR) vent cowl

All as per Srl item No 101 above but 110mm bore.

Excavation in trenches not exc 1.5m wide and not exceeding 1.5 mtr in depth for foundation etc shaft, cesspits, manholes sewage line etc not exc. 10 Sqm on plan and getting out complete all as specified and directed.

Demolition and breaking up old unserviceable salt glazed stoneware pipe 150mm bore at any depth set in cement morter incl PCC bed complete all as specified and directed.

S & F 150mm dia for reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for PCC 150mm 1:4:8 type D2 using 40 mm Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested;complete all as specified & directed.

M&L for PCC 1:4:8 type D2 using 40 mm stone aggregate filling foundation of manholes complete all as spd

M&L Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as incoping, benching, apex stone, bed plate, kneelers complete all as specified.

M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as cover slab for manholes and similar work etc complete all as specified.

Returning, filling in, trenches with soil in layers not exc 25 cm thick, watering and well ramming complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 mtr away & deposting where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for applying two coats of distemper oil emulsion, white or tinted, to new plastered surfaces on wall, over a coat of primer including 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old decorated brick/concrete/plastered or unplastered surfaces wall, pillars,cornices and removing all loose material and filling the all holes/patches with wall care putty to make surface smooth and applying one coats of OBD complete all as specfied and directed

M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved over a coat of cement primer complete all as specified and directed.

M&L for preparation of old decorated brick/concrete/plastered or unplastered surfaces wall, pillars,cornices and removing all loose material and filling the all holes/patches with wall care putty to make surface smooth and applying one coats of cement base paint and applying complete all as specfied and directed

M&L for prepration of newly plastered or un plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

All as per Srl item No 116 above but ceiling surface

M&L for preparation old decorated plastered surfaces of wall and applying one coat of white wash on wall complete all as specified and directed

All as per Srl item No 118 above but ceiling surface

M&L two coats of synthetic enamel painting on new steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces and red oxide primer complete all as specified and directed.

Material and labour for preparing new wood & wood based surfaces of any descriptions exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No 122 above but on steel surface

Harbhajan electric co

P S BUILDERS

buta singh and sons

KAILASH CONSTRUCTION CO

JOGRAJ CONSTRUCTION COMPANY

GORAYA AND CO

RATTAN CHAND CHANDAN AND CO

M/s. Nirmal Singh

D.RAJ And CO.

RAM CHAND SAINI & BROS.