CERTAIN REPAIRS/ REPLACEMENT SUCH AS JOINERY, SANITARY FITTINGS AND FIXTURES, PLUMBING FITTINGS, PLINTH PROTECTION, WPT, PLASTERING, ROLLING SHUTTERS, OH TANKS ETC. AT CERTAIN AREAS UNDER AGE B/R II UNDER GE CHENNAI

Amount

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but n. exc. 4.0 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm and refixing in the same opening complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and refixing in the same opening complete all as specified and directed.

M&L for 2nd class hardwood plain solid straight chowkats and frames rebated on solid, rounded or chamfered put together with glue pinned at joints and fitted complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

M& L 35 mm thick flush door shutter, solid core construction , with plywood B45core and plywood face panels, commercial type on both side etc.complete all as specified and directed.

Cutting holes in brick/stone walls in cement mortar or cement lime mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement or cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate for the required depth of embedded portion of hold fasts or lugs measured from the face of jamb in to the wall exc half brick but not exc one brick complete all as specified and directed.

M & L for Bands, straps, supports or stays for rainwater. Ventilating pipes including bolts, if required, hook (Stay) heavy for large gates, hook & pintle hinges, large hasps & staples, chain hand made sliding bolts, clamps, hold fasts, wall ties, hook for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way & three way straps , plate washers & similar small articles conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M & L for Preparing surfaces of wood and wood based materials, steel and iron work for treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each and treated with tar or coal tar black paint complete all as specified and directed.

M&L for Preparing surfaces of wood and wood based materials, steel and iron work for treating ends of posts, backs of chowkats, etc., area tarred n.exc 0.1 sq. m each and treated with tar or coal tar black paint complete all as specified and directed.

M&L for applying two coat of Synthetic enamel paint for wooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and directed.

S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames all complete all as specified and directed.

S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed in repairs, complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed.

S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed.

S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc., complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long all as specified complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, extruded section of size 150mm long complete all as specified and directed.

S&F aluminium handles cast type anodised 100 mm size complete all as specified and directed.

S&F aluminium handles cast type anodised 150 mm size complete all as specified and directed.

S& F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S & F in repairs mild steel 300mm , ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S& F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, 140 mm over all length of cover plate, fixed in floor complete all as specified and directed.

S& F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, 140 mm over all length of cover plate, fixed in floor complete all as specified and directed.

S&F in repairs aluminium (dia cast) body door closer hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg fixed complete all as specified and directed.

M&L 18mm thick plywood grade BWR type BWR with 0.90mm thick decorative laminates type-1 with screws to timber frame work fixed in repairs complete all as specified and as directed.

M&L 18/19 mm thick Particle board, medium density, flat pressed, single layer type / three layer type with BWR type adhesive, fixed with screws to timber frame work including dismantling of existing boarding any description fixed in any position complete all as specified and as directed

M&L for 6mm thick external teak wood lipping over 18/19mm thick particle board fixed with nails complete all as specified and directed.

S&F in repairs stainless steel cabinet hinges/self closing hinges/auto hinge complete all as specified and as directed.

S&F in repairs magnet door catches for cabinet cupboard shutters etc. complete all as specified and as directed.

S&F continuous (piano)hinges mild steel, bright finish or electro galvanised width of flaps 30mm(when open) fixed in repairs complete all as specified and as directed.

M & L Aluminium designer curtain rods (Draw berms rod) exterior grade 3 mm thick with holding clamps and fixed to wall PVC rowel plug and brass screws all as specified and as directed including dismantling existing one of any description.

M & L Aluminium designer curtain rod brackets suitable for above complete all as specified and as directed including dismantling existing one of any description.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stone work including removal of rubbish complete all as specified and as directed.

M&L brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

Taking down cement plaster or cement lime plaster brick or stone wall etc including racking out joints hacking for keys scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brickwork or concrete surfaces in CM 1:6 finished even & smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 15mm thick, in two coats one under coat 10mm thick in cement mortar 1:6 and final coat 5mm thick in cement mortar 1:4 mixed with PIDI PROOF LW at the rate of 200ml per bag of cement and finished fair and even on external wall surfaces complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid for separately.

M&L for Rendering 5 mm thick in Cement mortar 1: 3 on ceiling and finishing the surfaces fair and even with out using extra cement all as specified and as directed.

M & L Applying two coats of oil bound distemper over a coat of primer incl preparation of new plastered wall surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces on ceiling and applying three coat of white wash all as specified and directed.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gms/litre and UV resistance as per IS15489:2004., alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10sqm over new surface complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provide for complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings, framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed.

S&F Mild steel round pipe or hollow section pipe work as in post and joist connection with plates cleats and other connections, welding etc shall conform to grade FE-410W (Gde-E-250) quality a complete all as specified and as directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc as in window/ventilator chajjas conforming to Fe.290 Gde-E-165 complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, any thickness, including nainital or similar pattern roof covering complete all as specified and as directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, window/ventilator chajjas fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on new steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide primer complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe etc., and connected to water closet as per manufacturers instruction and as directed including removal of existing cistern etc.

S&F in repairs 15mm PVC connection 450mm long of superior quality complete all as specified and directed.

S&F plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device of make fixed with CI brackets fixed in repairs complete all as specified and directed.

S&F Vitreous china wash down water closet, white, squatting pan Orissa pattern of size 580x440mm with integral foot rest including making necessary connections to soil pipes and flushing cistern, fixed as in repairs complete all as specified and directed.

S & F Vitreous china wash down water closet (pedestal pattern ) white (excluding fixing bolts flushing cistern and flush pipe) and fixed repairs complete all as specified and directed .

S&F Vitreous china Wash Hand Basin, white, flat back of size 550x400mm excluding taps, waste, chain and plug and porcelain stopper out including brackets.fixed in repairs complete all as specified and directed.

S&F 15mm dia bib taps, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed and fixed in repairs.

S&F 15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated fancy type, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed and fixed in repairs.

Supply and Fix in repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated as per Cat No.BEA-87 of Make Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete all as specified and as directed.

Supply and fix in repair toilet paper holder with flap recessed type matt chromium plated as per cat No.BA-38 of Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete all as specified and as directed.

S&F in PVC waste pipe for wash hand basin (size 31/32mm x 800mm length) Make : Prayag Cat No.327 or its equivalent as approved by GE complete all as specified and directed

S&F in repairs PVC waste pipe for SS sink (Size 31/32mm x 1150mm length) Make : Prayag Cat No.330 or its equivalent as approved by GE all as specified and directed.

Supply and fix in repair CP wall mixer( 2-in-1) with L Bend (provision for over head shower ) as per Cat No 8375 of Make: Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete all as specified and directed.

S&F In repair15mm dia angle cock with flange, chromium plated as per Cat No.8310 of Make : Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete all as specified and directed.

S&F in repair 15mm dia 2 way bib cock with flange, chromium plated as per cat No.8311 of Make : Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete all as specified and as directed.

S&F in repair15mm dia bib cock long body with flange plate, chromium plated as per Cat No8308 of Make : Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete all as specified and as directed.

Supply and fix in repairs CP 125mm size over head shower ABS round with 300 brass arm & flange as per Cat No.BS-69 of Make : Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE all as specified and directed.

S&F In repair concealed stop cock regular body 15mm with flange plate, chromium plated as per cat No.8318 of Make : Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete all as specified and as directed.

Supply and fix in repair soap dish ,matt finished chromium plated (MCH/Colour) as per Cat No.BA-25G Make : Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE all as specified and directed.

S & F in repair corner glass shelf superior quality matt finished chromium plated (MCH/Colour CP ) with bracket and fittings as per cat No. BEA-52 of Make : Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE all as specified and directed.

Supply and fix in repair glass shelf matt finished chromium plated (MCH/Colour CP) of size 600mm long with bracket and fittings as per Cat No.BEA-53 of Make Prayag or its equivalent from Jaquar/Parryware as approved by GE all as specified and directed.

Supply and fix in repair towel ring square, chromium plated as per cat No.BA-11 of Make: Prayag etc. or its equivalent from Jaquar/Parryware as approved by GE complete all as specified and directed.

S&F in repair Towel rail 600mm long CP as per Cat No.BA-20 Make Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete as specified and directed.

Supply and fix Stainless steel plate rack of size 910mm x 780mm x 250mm (31'' x 36 " 10") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI 304 as per CAT No.P-348 of Make Prayag or its equivalent from Nirali/Parryware/Neelkant as approved by GE and fixed in repairs all as specified and directed.

S&F in repairs 15mm dia CP bib cock with nozzles with flange chromium plated as per Cat No.8305 Make : Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete all as specified and as directed.

S&F Cabinet Mirror PTMT 400x500mm with sided shelves fancy type of superior quality Cat No.554 Make : Prayag or its equivalent from Commander/Polytuff/H&R Johnson(I) ltd as approved by GE complete all as specified and as directed.

S&F repairs 32mm brass full thread SS waste coupling for wash basin fixed in repairs Cat No.BEA-11 Make : Prayag Make : Prayag or its equivalent from Jayna/ESS ESS/Kich as approved by GE complete all as specified and as directed.

Supply and fix in repairs CP sink cock regular spout with flant (W/M) as per Cat No.8316 of Make : Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete all as specified and as directed.

S&F Bottle trap 32mm bore of discharge pipe of PTMT having minimum water seal of 25mm fixed in repairs.(Minimum weight 32mm-260gms) complete all as specified and as directed.

S&F Bib tap of 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs. (Minimum weight 15mm-90gms) complete all as specified and as directed.

Supply and fix in repairs CP square trap size 101mm x 101mm as per Cat No.FT-73 of Make Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete all as specified and as directed.

S & F in repair Cockroach trap of size 127mmx127mm with waste hole, chromium plated as per cat No. FT-25 of make Prayag or its equivalent from Jaquar/GEM/Kohler as approved by GE complete all as specified and as directed.

Supply and fix Stainless steel plate rack of size610mm x 760mm x 254mm (24'' x 30 " 10") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI 304 as per CAT No.P-330 of Make Prayag or its equivalent from Nirali/Parryware/ Neelkant as approved by GE complete all as specified and as directed and fixed in repairs.

S & F 15mm dia hot and cold mixer type pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with along screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed and fixed in repairs.

S&F of CPVC pipes 16mm dia bore SDR 11 & Plain CPVC SDR 11 fitting on walls/ceilings or laying in floors complete all pipe fittings and including taking up/down in the existing pipes line completely all as specified and as directed.

S&F of CPVC pipes 20mm dia bore SDR 11 & Plain CPVC SDR 11 fitting on walls/ceilings or laying in floors complete all pipe fittings and including taking up/down in the existing pipes line completely all as specified and as directed.

Supply, hoisting and fixing in position of 500 litre capacity in two layer Rotational Moulded Polyethylene water storage tank (cylindrical vertical with closed top) complete all as specified and as directed including dismantling the existing PVC tank.

Supply, hoisting and fixing in position of 1000 litre capacity in two layer Rotational Moulded Polyethylene water storage tank (cylindrical vertical with closed top) complete all as specified and as directed including dismantling the existing PVC tank.

S&F in repairs stainless steel sink of size 915mmx460mm with draining board and bowl size 410mmx330mmx160mm, made out of 1mm thick stainless steel sheet of good quality including proven of waste coupling and 40mm dia waste pipe fitted over a pair of CI brackets. Make Prayag or its equivalent from Nirali/Parryware/ Neelkant as approved by GE.

S&F in repairs stainless steel sink over all size 495x420 mm and bowl size with out draining board and bowl size 410x330x160mm, made out of 1mm thick stainless steel sheet of good quality including proven of waste coupling and 40mm dia waste pipe fitted over a pair of CI brackets all as specified and as directed by the Engineer-in-Charge.Make:Prayag or its equivalent from Nirali/Parryware/ Neelkant as approved by GE.

S&F Ball valve high pressure of PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed for 20mm bore pipe and fixed in repairs complete all as specified and as directed.

S&F Ball valve high pressure of PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed for 25mm bore pipe and fixed in repairs complete all as specified and as directed.

M&L for servicing the existing rolling shutters of any size any type by taking down the cover, laths and complete accessories of rolling shutter and made functional including replacement of ball bearings, springs, gear including welding works if required and applying grease complete all as specified and as directed.

M&L 75mm thick PCC type B1, (1:2:4) using 20mm graded stone aggregate as in plinth protection and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L 40mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L 100mm thick PCC type D-1 (1:4:8) using 40mm graded stone aggregate as in sub base of floor complete all as specified and as directed.

M & L for dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and as directed.

S&F anodised aluminium snap grid size of grid 605mm X 605mm frame work for false celling including hangers fixed to roof slabs by means of ceiling cleats etc. complete, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 2.5mm dia. 40mm long complete all as specified and as directed.

M & L 6mm thick non asbestos fibre cement building boards fixed in ceiling flat or slope or laid/ inserted to timber/GI/Aluminium frame work with screws complete all as specified and as directed.

Demolition of slabs and HP tiles of any description or thickness in roofs laid, bedded and pointed in any mortar and remove the debris to outside of MOD land complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 25 mm thick (using 12.50mm graded coarse aggregate) finished fair and even over concrete surfaces on roof top/ sub base of floor tiles complete all as specified and as directed.

M&L for rendering in cement mortar 1:3 10mm thick on fair faces of brick work or concrete surfaces and finished the surfaces fair and even complete all as specified and as directed

Supply only liquid water proofing compound complete all as specified and as directed.

M&L APP modified prefabricated five layer water proofing membrane mineral finish, 3mm thick and weighing not less than 3.6 kg/sqm reinforced with non woven polyester matt black finished over compatible primer at 0.40 Litre/sqm and torch applications of membrane with 100mm overlap after necessary preparation of surface complete as per manufacturers instructions with bituminous aluminium paint on top complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed.

M&L for Vitrified light ceramic tiles 10mm thick (square / Rectangle) polished, area of each tiles n.exc.0.36sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed or bedding layer of mortar 15mm thick in cement mortar 1 : 4 for laying floor finishes complete all as specified and as directed.

Ditto above for work on vertical surfaces such as skirting, dados and risers to step etc., complete all as specified and as directed.

M &L Non -skid coloured ceramic tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed or bedding layer of mortar 15mm thick for laying floor finishes complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM 1:4 on fair face of brick or concrete surface complete all as specified and as directed.

M&L for demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25 mm dia bore pipes complete all as specified and as directed.

M & L In repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 20 mm dia bore pipes complete all as specified and as directed.

M & L In repair PVC over head water tank cover suitable for 250 to 2000 lit capacity tank including hing device and locking arrangement complete all as specified and directed. (make Syntex/Rino)

Disconnecting existing tanks setting aside (or lowering if required ) for cleaning and removing all scales and dirts etc from tanks and from mouths of circulating pipes etc and reconnecting and refixing in position of tank capacity exc 250 ltrs and n.exc 500 ltrs capacity pvc water tanks complete all as specified and as directed.

Disconnecting existing tanks setting aside (or lowering if required ) for cleaning and removing all scales and dirts etc from tanks and from mouths of circulating pipes etc and reconnecting and refixing in position of tank capacity exc 500 ltrs and n.exc 1000 ltrs capacity pvc water tanks complete all as specified and as directed

Attending minor complaints of joinery such as wooden /steel/aluminium of any description including pelmet box, cupboards, drawers and like door springs, rolling shutters etc, requiring carpentry work like adjusting easing, cutting , pinning, welding and finally making good etc and functioning to seating over with each other with tightening of screws/nails, door and helical springs, door closures etc;, including petty repairs material like screws/nails, plug, grease etc., to make it functional as in day to day maintenance work complete all as specified and as directed.

Attending the minor complaints of plumbing and sanitary fittings including water leakage from taps, WCs, flushing systems, urinals, wash basins, flush pipes, bottle traps , tanks delivery pipe lines etc and any obstruction to water supply in rooms/Qtrs. requiring plumber work with minor stores such as replacement of brass spindles, M seal, screws, nailing, washers, check nuts, short pieces, union, elbows, tightening fittings of flushing cistern etc., complete all as specified and as directed.

SWIFTTECH ENGINEERS INDIA PVT LIMITED

GK ENTERPRISES

G.L.THIRUMALAI NAIDU AND COMPANY