SPL REPAIR REPLACEMENT OF 40 IRON GATES OF JCOs GOVT MD ACCN OF 505 ABW AND OTHER SANCTIONED WORK UNDER GE NORTH DELHI CANTT-10

Amount

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting in soft /loose soil, complete all as specified & directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes, pier holes, foundation etc and getting out in any type of soil complete all as specified & directed.

Excavating over areas not exceeding 1.5m in depth etc for septic tank/soakage well, foundation etc and getting out in any type of soil complete all as specified & directed.

Returning filling in and including spreading levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified & directed.

Removing excavated material not exceeding 50m and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and as directed.

Removing excavated material exc. 250 m but not exceeding 500m and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and as directed.

M&L sand filling under floors or in foundations including watering and consoilidation complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete all as specified & directed.

M&L for cement concrete 1:2:4 using 20mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate as in coping, kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L RCC slab type B1 1:2:4 using 20mm graded crushed stone aggregate supported on walls, beams & columns etc as in roof, septic tank covers & the like complete all as specified & directed.

M&L for plain cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregate as in fixing of hold fast of door frame in wall complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed.

All as per the description of Srl item No.14 above but except bricks.

Damp proofing course to horizontal or verticle surfaces incl necessasry form work in PCC 1:2:4 type B0 40mm thick complete all as specified & directed.

M&L for reinforced cement concrete 1:2:4 (Nominal mix) type B0 (12.5mm graded crushed stone aggregate) as in beams, cantilevers, bressummers lintels over 1.5m span complete all as specified & directed.

M&L for reinforced cement concrete 1:2:4 (Nominal mix) type B0 (12.5mm graded crushed stone aggregate) as in columns, pillars, piers posts and struts etc complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete all as specified & directed.

M&L granite 20mm thick colour as approved ( of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L granite 20mm thick colour as approved ( of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 10mm thick in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite

Form work to soffits of suspended slab such a roof slab, septic tank etc not exc 200mm thick complete all as specified & directed.

Form work to edges of roof slab, RCC bands etc n.exc 200mm complete all as specified & directed.

Form work to sides and soffits of floor or roof beam, beam haunchings, lintels cantilevers, shelves incl supports etc and similar work for rough and flat surface complete all as specified

M&L form work to sides of concrete fouondation, footings bases of columns raft and raft beams sides ans soffits (if any) of foundation and plinth beams and simmilar work vertical or batter complete all as specified and directed

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each (without taking off shutters from the frame) and complete all as specified & directed.

All as per the description of Srl Item No. 27 above but exc 1.5 sqm but n.exc 4sqm each

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified.

S&F factory made solid PVC moulded shutter 28-30mm thick styles with 2, 4 or 6 raised panels design with 2mm thick moulded prelam PVC sheet on the front face and 2mm thick prelam sheet on the back face with particle board core, complete all as specified & directed.

S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F factory made single extruded WPC (wood polymer composite) solid decorative door frame of size 50x 100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fiber (wood powder/rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threadd star headed SS screws having minimum frame density of 650 kg / cum and screw withdrawal strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength 58 N/mm2 and resistance to spread of flame of class A catergory with property of being termite/ borer proof water / moisture proof and fire retardent and fixedin position with MS hold fast/ lugs/ SS dash fasteners of required dai and length complete as per direction of Engr-in-Charge Note:- For WPC solid door minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable variation in profile dimensions on plus side shall be acceptable but no extra payments on this account shall be made.

S&F factory made single extruded WPC (wood polymer composite) solid decorative type flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (suspension grade). Calcium carbonate andnatural fiber (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge) minimum compressive strength 50N/mm2 modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with properly of being termite/borer proof water/moisture proof and fire retardent WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both face of shutter and fixing with stainlss steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engr-in-charge Note stainless steel butt hinges shall be paid seperately

S&F ACECO 4000 series double shutter (glazed and gauzed) steel windows and ventilators with guard bars, fabricated from roll formd sections made mild steel sections including 4mm thick plain glass in glazing for glazed shutter and stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm complete for gauzed shutters. including two coat of synthetic enamel paint over a coat of red oxide on steel surface all fitting and fixtures all as specified in CEDZ TD drawing CEDZ/C-TD/.209

S&F factory made 18mm thick 100% Solid WPC ( Wood polymer Composite) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets.

S&F factory made 18mm thick 100% Solid WPC (Wood polymer Composite) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), calcium carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from extrusion process WPC foam sheet single extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being termite/ borer free. water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets.

S&F butt hinges of medium weight cold rolled mild steel 100mm size and fitted to wooden or steel frame all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 150mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed.

S&F 250mm long aluminium alloy, anodised , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long fixed with screws complete all as specified & directed.

S&F aluminium anodised handle of extruded section 100mm long fixed with screws complete all as specified & directed.

S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete all as specified & directed.

S&F aluminium handle cast type anodized 150mm, complete all as specified and directed.

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified & directed.

S&F aluminium anodized barrel tower bolts of extruded section of length 150mm and fixed with cadymium plated wood series, complete all as specified and directed.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified & directed.

S&F 150mm dia oval shape brass handle cromium plated fancy type polished bright finish complete all as specified & directed.

S&F continuous (Piano) hinges, brass, 30mm width of flaps (when open) complete all as specified & directed.

S&F 4 levers brass cupboard locks grade-I, size 65mm complete all as specified & directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F for stainless steel wire mesh 0.36mm dia fixed with tinned tacks of stainless steel wire and average width of aperture 1.4mm complete all as specified & directed.

M&L mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality all as specified and directed.

M&L TMT bar 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

M&L, mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to TMT bars, complete all as specified and directed.

S&F steel windows with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing/gauging bars, dovetailed or welded.complete all as specified.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F MS bars as in window guard bars welded to steel window frame or fixed to wooden frame all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to I.S.1161-1998 grade St-240 complete all as specified and directed.

S&F for mild steel gate ornamental type made of tubular mild steel section, grill or frame work including 2 x holdfast, 2 x pintels hinges in each shutters, stoppers, bushes, and all as CI decorative pieces, i.e spikes floors etc, locking arrangement MS sliding bolt etc complete complete all as specified and directed.

M&L anodised aluminium snap grid frame work of size 605x605mm for false ceiling and perforated particle board or tiles 12mm thick for insulation and accoustic purpose, 60m x 60cm in size including hangers 6mm dia G I (upto 1200 length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L PCC 1:2:4 type B-0 padding on roof as in leveling to making slope, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for APP based polymeric membrane with mineral granules finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints complete all as specified and directed.

S&F for heat resistant terrace tiles (300mm x 300mm x 20mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150mm height along the parapet walls in the same manner complete all as specified and directed.

M&L for laying of APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) removing and Cleaning existing damaged APP membrane from roof surface and clean all cement mortar and vegitation, plants with roots properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per litere at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch application with 10cm side laps and 15cm end lap over hot bitumen 85/25 grade @ 1.2 Kg/Sqm overbituminous primer before Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for glazed ceramic digital coloured tiles of size 450mm x 350mm x 7mm as in vertical surfaces such as skirtings, dados set & jointed in neat cement slurry & pointed with white or coloured cement to match over and including rendering 15mm thick in CM 1:4 as in backing coat for fixing wall tiles complete all as specified & directed.

S&F non-skid coloured ceramic tiles 7 to 8mm thick square/rectengular) area of each tiles exc 0.11 sqm but n exc 0.18 Sqm as in floors, etc set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

S&F non-skid coloured ceramic tiles 7 to 8mm thick square/rectengular) area of each tiles exc 0.18 sqm but n exc 0.38 Sqm as in floors, etc set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L vitrified ceramic tiles 10mm thick square /rectangular light shade texture polished, area of each tiles not exceeding 0.36 sqm,as in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile over and including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 100mm thickness M-50 grade with Grey cement and pigment complete all as specified and directed.

M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in subase of floor, including necessay form work complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using (40mm graded aggregate) as in sub base floor complete all as specified and directed.

Material & labour 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in for sub base flooring complete all as specified & directed.

M&L for 60mm thick M-35 grade factory made rubber moulded coloured machine pressed precast concrete interlocking paver block in approved design and colour, conforming to IS-15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed. Note:- The ost of sand for cushioning of paver block is deemed to be including in quoted rate against this item.

M&L endura designer tiles 8-10mm thick as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. complete all as specified and directed

M&L for 100mm thick cement concrete 1:4:8 type D-2 (40mm graded crushed stone aggregate) as in sub floor; complete all as specified and directed.

M&L 18-20mm thick black marble stone in one piece as in staricase footer and half moulding in front of footer (table rubbed & polished) including beaded and jointed with grey cement slurry & pointing in white or coloured cement using marble dust with admixture of pigment of match with marble shade of green marble stone & including grinding cutting & polishing the exposed edges over and including 15mm thick screed bed/rendering in CM 1:4 complete

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified & directed.

M&L for rendering 10mm thick plaster in CM 1:6 on brick or concrete surface in cement mortar on Internal Wall Surface finished even and fair without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick plaster in CM 1:3 on ceiling concrete surface in cement mortar, finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick plaster in cement mortar 1:4 on brick work or concrete surfaces on finished even and fair without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair/un-even surfaces of brick work or concrete surfaces using liquid water proofing compound @ 200ml per 50Kg of cement bag to be finished even and smooth without using extra cement, complete all as specified and directed. Note:- The water proofing compound shall be measured and paid separately.

M&L 15mm thick rendering on other than fair facesor brick masonary or concrete surfaces in cm 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces, applied in two layers i.e. Iast layer of 10mm thick rendering in cement mortar (1:6) and 2nd (top) layer of 5mm thick rendering in cement mortar (1:4) mixed with liquid WPC finished even and fair etc complete all as specified and directed. Note:- WPC shall be measured and paid separately

M&L for 10mm thick rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished even and fair without using extra cement complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified & directed.

M&L preparing new ceiling surfaces applying three coats of white wash complete all as specified.

M&L for preparing new plastered surfaces of walls and applying two coats of cement based paint complete all as specified.

M&L three coats of white wash on newly plastered surfaces of wall including preparation, complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying two coat of cement base paint over alkali resistence primer on wall complete all as specified and directed.

M&L for finishing walls with acrylic smooth exterior paint of reqired shade: New work (two or more coat applied @ 1.67 ltr/10Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10Sqm complete all as specified and directed.

M&L for preparation of new surfaces (Plastered or un-plastered) of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified.

M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface.

S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares area not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking up or down old 15mm bore dia GI tubing and eonnections including cleaning for refixing or removal to stone complete all as specified & directed.

M&L for 15mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls, ceiling or laid in floors complete all as specified & directed.

S&F in repairs bib taps, long body, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15mm dia complete all as specified & directed.

S&F in repairs angular stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union complete all as specified & directed.

S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (concealed type) complete all as specified & directed.

S&F brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed.

S&F gun metal gate valve with iron wheel head ,screwed both ends for iron pipe and fixed 20mm bore complete all as specified & directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified & directed.

S&F vitreous china (Star white) WHB counter top type of size 550 x 400mm including CP waste fitting 32mm, complete all as specified and directed.

S&F pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, for 15mm bore dia screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S&F PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description complete all as specified & directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) connection to trap and to flushing pipe complete all as specified and directed.

S&F EWC Seat cover of PVC black/white complete all as specified and directed.

S&F in repairs Vitreous china squatting pan of Orrisa pattern long pan size 580mm white with 'P' or 'S' trap front or back inlet and fost rest any pattern including connection to trap and to flushing pipe etc complete including lime concrete bedding and making good to floor complete all as specified.

S&F vitreous china urinal half stall type white including waste pipe and coupling (excluding flushing cistern , flush pipe and waste pipe) complete.

S&F PVC connections 15mm size with PTMT nuts of length 600mm long complete all as specified.

S&F rotational moulded polyethene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including disconnecting existing tanks etc complete all as specified and directed.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe 20mm bore, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal section complete all as specified and directed.

S&F stack clamps for 100mm bore pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F SFRC manhole covers with and including frame medium duty over all size 900mm x 450mm x 80mm thick factory made and test load 10 tonnes (MD-10), strength as per IS-12592 (2002), ISI marked complete all as specified & directed.

S&F SFRC GT covers with and including frame medium duty over all size 400mm x 400mm x 80mm thick factory made and test load 10 tonnes (MD-10), strength as per IS-12592 (2002), ISI marked, complete all as specified and directed.

M&L for cement concrete aggregate bed to drain pipe 100mm dia including packing under and hunching against the sides of pipe after they are laid and tested in cement concrete 1:4:8 type D 2 using 40mm graded crushed stone aggregate complete all as specified and directed.

Demolition of cement concrete mud phuska of any description and in any position not specifically provided for complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), eas, stair cases, landing, Chajjas and similar suspended work (Reinforcement cut as required to facilatate demolition) complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed.

Taking down brick tiles, terracing tiles, single layer from roof laid, bedded and pointed in any mortar all as specified & directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to wall, ceiling or laid in floors of , complete all as specified and directed.

S&F 10 Ltrs capacity PVC low level valve less flushing cistern (white) symphonic action type with all fittings such as inlet ball valve bloat and handle and flush pipe of polythene, complete all as specified and directed.

S&F vitreous china squattting pan, 'Orissa' pattern, size 580mm x 440mm, white, with "P" or "S" trap, with integral foot rests excluding flushing cistern but including connection to trap, anti syphonage pipe etc. complete all as specified and directed.

S&F 15mm bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all specified and directed.

S&F vitreous china wash hand basin ovel type of size 550mm x 400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings etc complete all as directed and spcified.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with clamps etc complete all as specified.

S&F in PVC (SWR) bends any radius bore 75mm complete all as specified and directed.

S&F cast iron 75mm nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S&F 100mm dia of PTMT (minimum weight 25 gms) grating round shape fixed over floor trap with coloured cement complete all as specified and directed.

S&F vitreous china urinal, half stall type, white (back wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and directed.

S&F 15mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch orbutterfly handle, screwed bothends for ironpipe or forunions and fixed complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 Ltrs and n exc. 500 ltrs, setting aside (or lowering if required) for rapairs, cleaning, etc. and hoisting if required reconnecting and refixing in position. (Cleaning repairing, etc measured separately), complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc from tanks of capacity exc 250 & n exc 500 ltrs and from mouths of circulating pipes etc.

Supply, laying and fixing of 20mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc suitable for 15mm bore bath fittings). Note- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings.

Supply and laying of 25mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc). Note- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings.

S&F in repairs kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions all as specified. Make:- Jaquar ARI39309 or equivalent as approved by GE

S&F stainless steel basket (plain) of size 50cmx37cmx10cm made of 4mm thick S.S. wire approved quality with suitable arrangement for fixing Telescope basket (channel) 11/25 inch length two way extruded MS galvanised over rollers of approved Make

S&F Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm made of 4mm thick S.S. wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved Make

S&F stainless steel plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm thick S.S wire aproved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make.

S&F stainless steel partition basket of size 50cmx37cmx16cm made of 4mm thick S.S. wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extrude MS galvanised over rollers of approved make.

S&F stainless steel cutlary basket of size 50cmx37cmx10cm made of 4mm thick S.S. wire and bottom of S.S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (Channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make.

S&F stainless steel basket (plain) of size 50cm x 37cm x 16cm made of 4mm thick S.S wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make.

S&F stainless steel bottol full out of size 50cm x 40cm x 16cm in two tier made of 4mm thick S.S wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make.

S&F telescope basket/drawar (channel) 18/25 inch length extruded MS galvanised over rollers of approved make

S&F stainless steel 1mm thick sinks with drainage board made of kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar including fixing cantilever brackets connecting union to pipe and 32mm dia GI pipe duly painted upto Nihani Trap or Floor trap complete as directed at site, overall size 915mmx460mm bowl size 410mm x 330mm x160mm. complete all as specified and directed.

Supply & installation high galvanized mast light 15 mtrs height suitable for 6 to 9 lantern (80 to 150W LED type fittings) symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6mm dia 97/19 guage and double drum winch with luminaire mounting arm, pully assembly, aviation obstruction light, lightning arrester spike, control panel board with control system including RCC foundation as per height complete all as specified and directed. Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour. Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 2.5 sq. mm, lugs and all labour. Installation of the mast feeder pillar by grouting the stand in concrete.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed

S&F GI tubing light grade 40mm dia for protection of cable passing through duct / road crossing / on pole / on wall including all fitting and fixing arrangement like clamps made out of 25mm x 3mm flat iron and nut bolts complete all as specified and directed.

M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed. Note:- Punned thickness 18cm shall be considered for payment as per para 19.75 of SSR Part-I.

M&L for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” designation75 laid dry and flat and width wise along the axis of the trench complete all as specified and directed.

M&L in replacement for earthing complete with galvanised steel plate electrode of size 600mm x 600mm x 6.30mm thick burried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised iron 25 x 4mm strip as earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 40mm bore (Light grade) for building LT wall panel all as directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30 x 30 x 10cm with one handle for lifting made out of 8mm diameter MS bar finnel wire mesh 20mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soilwith all as shown in electrical plate No. 3 of SSR Part-I 2009 including testing on completion all as specified and directed. Note:- On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.

M&L for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for One light / bell / buzzer point controlled by one, one way switch 06 Amps.

All as per the description of Srl item No. 169 above but one Ceiling / exhaust fan point controlled by one, one way switch 5/6 Amps

All as per the description of Srl item No. 169 above but one 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 06 Amps switch

All as pe rthe description of Srl item No. 169 above but with point wiring 1.5 Sqmm single core FRLS cables and earth continuity wire of 1.5 Sqmm single core FRLS cable for one 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch but not below the switch board of light points in the same vertical plane.

All as per the description of Srl item No. 169 above one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board and independent MCB complete all as specified and directed

S&F switch piano flush type, 06 Amps, single pole, one way, 230 volts complete all as specified and directed.

S&F switch piano flush type, 16 Amps, single pole, one way, 230 volts with switch frame complete all as specified and directed

S&F socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 230 volts with socket frame complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 230 volts with socket frame complete all as specified and directed

S&F ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, humfree, AC, 230 volts, 120 watts incl connection complete all as specified and directed

S&F ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified and directed

S&F surface mounting LED integrated aluminium housing batten with polycarbonate deffuser luminaire not less than 18 W, 4 feet fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 2.5 KV, CCT 6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V and all accessories pre-wired including connecting up with copper conductor wire of suitable size with connector block complete.

S&F surface mounted LED building security light fitting in high pressure die cast aluminium housing polycarbonate deffuser not less than 20 watt fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 2.5 KV, CCT 6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V including light grade GI tube mounting size 40MM bracket of suitable size & length, bend to shape and fixed to wall by means of 02 nos. of 40 x 5mm flat iron clamps, nuts, bolts and washers etc complete and one coat of primer and one coat of synthetic enamel paint after coating of primer on GI bracket and pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core complete all as specified and as directed.

Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan copper wound Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete all as specified and directed

S&F in replacement sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and sheet metal enclosure double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed. Note: - (a) MCB shall be measured and paid seprately under respectively item. (b) Make for the DB/MCB/MCCB shall be same.)

Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning by using suitable copper lugs complete all as specified and directed:-

SP 6 To 32 AMP

SPN 40 to 63 AMP

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mm x 40mm x 3mm frame for pit cover including testing on completion complete all as specified and directed. Note:- On testing after completion if the desired earth resistance is not obtained then earthing will be redone at no extra cost.

Supply and laying or fixing or passing through pipe in repair of 1100V grade, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 10 sqmm 2 core nominal cross section, complete all as specified and directed.

S&F GI pipe light grade of size 40mm bore dia, complete all as specified and directed

M&L for road cutting wide width 30cm and depth 45 approx making good to match with existing complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling rose, holder, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete all as specified and directed

Taking out unseviceable main switch DB SPN/TPN,MCB DB existing complete all as specified and directed

M&L for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per the description of srl item No.191 above but one light point controlled by one switch of 6Amp

All as per the description of srl item No.191 above but one fan point controlled by one, one way switch 06 Amps

All as per the description of srl item No.191 above but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch

All as per the description of srl item No.191 above but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch

All as per the description of srl item No.191 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sqmm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed

S&F switch piano flush type 5/6 Amps single pole one way 230 Volts complete all as specified and directed

S&F switch piano flush type 15/16 A single pole one way 230 Volts complete all as specified and directed

S&F socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volt complete all as specified and directed

S&F socket Outlet 2 in 1, 3/6 pin 5 and 15 Amp flush type 230 Volts complete all as specified and directed

S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified and directed

S&F in repairs wall mounted LED batten with polycarbonate housing and initigrated electronic drive 20 watt fixture 4 feet provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed

S&F in repairs surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed

S&F in repairs LED security light fitting of 35 watts with pressure die-cast aluminium housing complete with all accessories, fixing of fitting on wall with necessary fixing arrangement, IP66 protection as required at site & connection complete suitable for pole dia 40mm. complete all as specified and directed

S&F in repairs ventilating fan, wall mounted type of 250mm sweep, 240 volts, AC, 50 Hz capacity, cutting of hole in wall, making of wooden frame/all required arrangement for mounting of fan including making good of disturbed surface etc complete all as specified and directed

S&F in repairs MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following no of way :-

S&F in repairs MCB, DP/SPN, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete of following rating :-

S&F in repairs MCB, SP, AC, 240 volts of 6 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

S&F in repairs for submain wiring with two single core PVC insulated cable with 6 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete all as specified and directed. Note:- Two run for neutral and phase and one run for continous earth wire alongwith PVC conduit shall be measured as one unit length.

Supply, laying, jointing & testing of GI Pipe, medium grade, including all fittings in old/new position, laid in trenches/ wall including taking down the old/unsv pipe line complete all as specified & directed of following sizes :-

25mm dia

20mm dia

S&F in repair gun metal, globe or gate valve, screwed down high pressure with iron wheel head, screwed both ends complete for the following sizes of pipes :-

25mm dia

20mm dia

Material & labour for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for up to required module etc complete and making good to the disturbed surfaces to match the existing complete all as specified and directed for for One light / bell point controlled by one, one way switch 06 Amps complete all as specified and directed

All as per the description of srl item No 207 above but one fan point controlled by one, one way switch 06 Amps

All as per the description of srl item No 207 above but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch

All as per the description of srl item No 207 above but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch

All as per the description of srl item No 207 above but point wiring with 4 Sqmm single core FRLS cables and earth continuity wire of 4 Sqmm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed

S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete all as specified and directed

S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete all as specified and directed

S&F modular socket outlet 5 Pin, 6 Amps, 2 module with shutter complete all as specified and directed

S&F modular socket outlet 2 in 1, 3 pin, 6/16 Amps, 2 module with shutter complete all as specified and directed

S&F decorative wall mounting light SS finish fixture with extruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 Watts LED bulb having minimum efficiacy at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@ operating voltage 170V-240V for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete all as specified and directed

S&F in replacement exhaust fan 300mm sweep, 230V, AC, steel body with louver shutter etc complete and connection from ceiling rose to fan terminal incl cutting of hole at wall for required size and making good disturbed surface complete all as specified and directed. Note:- Old unserviceable exhaust fan shall be deposited in E/M store yard.

VIKRANT CONSTRUCTION CO. (BID ID -3284128)