PROVN OF CENTRAL CAR PARKING SHED AT NEW SHEA LINE , SANJOG CHHETRI VIHAR AND OTHER SANCTIONED WORK IN THE AREA OF AGE BR-II UNDER GE (EAST) LUCKNOW.

Amount

Taking down PVC/AC/CI/SSW 100/75mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including 25x5mm size MS holding clamps, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including 25x5mm MS holding clamps, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F for 110mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

S&F for 110mm bore PVC (SWR) junction single (single T) with access door equal or unequal complete all as specified and directed.

S&F for PVC (SWR) floor trap of size 110/75mm bore plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for CP grating of 100mm dia complete all as specified and directed.

Jointing only for 100 mm bore cast iron pipes & fittings to PVC pipes & fittings, in repairs, with epoxy based repair polymer and making joints leakproof complete all as specified and directed.

Cutting holes into or through in brick walls built in cement mortar area exc 0.15 Sqm but n exc. 0.2 Sqm & making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & directed.

S&F in repair viterous china wash hand basin white flat black type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

S&F PVC connection of 15mm bore, 450mm long with brass coupling on both ends of superior quality complete all as specified and directed.

Taking up or down 15mm dia PVC tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia PVC tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F for galvanized steel water tubing medium grade of 15mm bore with & including all fittings to walls and ceilings or laid in floors complete all as specified and directed.

S&F for galvanized steel water tubing medium grade of 20mm bore with & including all fittings to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases, pinning in brick walls for concealed water tubing making good to facings where required and pointing in CM 1:3 cutting not exceeding 10 cm girth complete all as specified and directed.

S&F in repair long body 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including CP cover plate fancy type fixed as in repair complete all as specified and directed.

S&F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs long body15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and directed.

S&F for 32 mm bore brass chromium plated bottle trap for wash basins with inlet & outlet, screwed for pipe or connections including necessary packing union & cap complete all as specified and directed.

S&F in repair 32mm dia HDPE pipe for WHB, sink waste/drain pipe fixing with clamps, complete all as specified and directed.

S&F of 15mm bore two way bib tap chromium plated, cast copper alloy with fancy type handles screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in rep CP Jet with flexible tube complete all as specified and directed.

S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, white colour, three layered (cylindrical vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe etc including dismantling of existing water tanks of capacity exc 250 Ltr & not exc 500 Ltr and removing from site complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hoisting if required reconnecting & refixing in position, complete all as specified and directed.

S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.

S&F for 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed, complete all as specified and directed.

S&F in repair 15mm bore brass chromium plated shower rose 125 mm size without swivel joint including to steel pipe or union complete all as specified and directed.

S&F 4 mm thick asbestos cement plain building board of size 600 x 600 mm in ceiling fixed with screw or as per manufacturer instruction with aluminium snap grid of size 605x605mm of frame work for false ceiling including dismantling of existing wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs /blankets, any thickness, including cover fillets complete all as specified and directed.

Taking down chowkhat any type with shutter (without taking off shutter from the frame) and area exc 1.5 sqm and not exc 4.00 sqm each, complete all as specified and directed

Taking down chowkhat any type with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete all as specified and directed

Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed.

S&F 125x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast (40x3mm) etc. complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkhat, complete all as specified and directed.

S&F factory made 100% Solid WPC (Wood Polymer Composite) Door Frame of size 75mm x 45 mm (Moulded) Single Rebated made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed srews having minimum frame density of 780 kg/ cbm having good screw holding capacity (Screw Withdrawal strength of (Min. 990 N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, complete all as specified and directed.

SZ&F factory Made 30mm thick 100% Solid WPC (Wood polymer Composite ) Laminated Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade ), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel, incl butt hinges of 100mm size with necessary full body threaded star headed counter sunk SS Screws, complete all as specified and directed.

S&F of factory made Solid uPVC frame (Single Rebated) of size 60mm x 30mm made out of solid uPVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F of factory made soild uPVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner in frame at site complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm medium weight, complete all as specified and directed.

S&F steel window with side hung shutter (glazed) incl box type hinges, steel handle, peg stay lugs complete with glazing bars and painted with one soap coat of red oxide primer complete all as specified and directed.

S&F for steel window with side hung shutter (mosquito proof) with box type hing, peg stay, lugs, handles, without glazing bars complete incl one soap coat of red oxide primer complete all as specifed and directed.

M&L for preparation of newly wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed.

Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3, depth of cutting exc half brick but n. exc one brick, complete all as specified and directed.

S&F mild steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Grade E-165 (Fe 290) including necessary welding etc. complete all as specified and directed.

M&L for in repair block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work and fixing of 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per makers instructions complete all as specified and directed.

M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but not exc 6 sqcm fixed with nail complete all as specified and directed.

M&L 2nd class hard wood, plain fillets, square or rectangular or tringular in section clean sawn sectional area not exc 3 sqcm fixed with nail complete all as specified and directed.

S&F stainless steel butt hinges of size 75mm medium weight, complete all as specified and directed.

S&F magnet catcher for cup board shutter complete all as specified and directed.

S&F 100 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality & glazing with oil putty or wooden beads in square area not exc 0.5 Sqm in each pane and in any height and any position, including hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads, complete all as specified and directed. complete all as specified and directed.

S&F 4 mm thick figured glass, pin head type & glazing with oil putty in squares not exc 0.5 sq.m in each pane and in any height and any position, including hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads, complete all as specified and directed. complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples in any height and any discription all as specified.including taking down ms door frame/wooden door frame including wooden beading and refing ms door shutter/wooden door shutter with new wire mesh with tinned tack/flat iron in steel door and wooden beading in wooden door for securing the wire messe and making good the disturbed portion during execution complete all as specified and directed.

S&F in repair CP tubular towel rail of superior quality 'D' type 20mm dia 60cm long between flanges complete all as specified and directed.

S&F for PVC corner shelf 300mm with chromium plated guard, fixed with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F aluminium anodised pegs 6 legs fancy type, all as specified fixed, as in repair, complete all as specified and directed.

S&F in repairs, PVC coated, MS curtain rods 22 - 25 mm dia with and including fixing of two Nos MS brackets and decorative type PVC knobs at both ends of curtain rod complete all as specified and directed.

S&F for stainless steel kitchen plate rack of overall size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.63 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.

M&L for welding in repairs not exc 2.5cm in length and thickness of metal exc 6mm but not exc 9mm complete all as specified and directed.

Demolition of brick work built in cement mortar including all of quoins, arches, pillers etc.but excluding ashlar facings and precast concrete articles complete all as specified and directed.

M&L for brick work using fly ash brick, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) , complete all as specified and directed.

Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key scrubing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with including water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic edge cut tiles 7 to 8 mm thick (square/ rectanglar) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm as in floor over and including screed bed 15mm thick in CM 1:4 or beding layer for laying floor finishes etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for coloured glazed ceramic edge cut tiles 600X300X7mm thick but as on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:3.complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block ruberised any shape and size, with white cement & pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade joints of blocks to be filled with dry sand completed all as specified and directed.

M&L for sand filling under floors etc complete incl watering & well ramming complete all as specified and directed.

S&F machine made precast cement concrete curb stone blocks using cement concrete 1:2:4 type B1 (20mm graded agg) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as spcefied and directed.

Excavating in post holes in soft/loose soil (or similar holes) each not exc 0.5 cu.m. getting out, returing, filling in and ramming earth or broken ruble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance not exc 50 M and making good surface complete all as spcefied and directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate in foundation, filling & mass concrete complete all as spcefied and directed.

M&L framed work such as grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for flat iron for fixing chin link or hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and clountersunk for balusters running bars, for doors, balusters, nosing to steps including embneding in concrete and screwing etc wid ties for roof including securing bolts, posts and struts in fencing including cutting tops shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or reveting etc, and similar work conforming to Fe-290 or Fe-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standerd, rails, straining bolts etc including provision of binding wire complete all as spcefied and directed.

Supply 3 mm dia galvanised chain link fencing, 75mmx75mm complete all as specified and directed.

M&L for mild steel screw upto 12 mm dia of bolts (machine made) with haxagonal or square heads at one end and screwed the other,or screwed bolt ends, each screwed and to be fitted with washers and one hexagonal or square nut, length of bolts upto 30 cm long complete all as spcefied and directed.

M&L for preparation of old decorated surfaces of walls by washing, rubbing down & stopping of distempered & painted surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including a coat of 3mm thick white wall care putty, complete all as specified & directed.

M&L for preparation of old previously treated surfaces of walls by and applying one coat of white wash on walls complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceilling and applying one coat of white washing on ceilling complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed.

M&L for preparation of old decorated surface of wall by washing, rubbing down all black spots from painted surfaces & applying one coats of cement base paint of approved shade/tint complete all as specified and directed.

Surface excavtion not exc 30cm deep and avg 15cm deep and getting out soft/ loose soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavation material not exc. 50m and deposited where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Hard core of gauge not exc 63mm ( using broken stone or boulder ), depoisted, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 Type D-2 ( using 40mm graded agg ) as in sub base of floor complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 Type B-2 ( using 40mm graded agg ) as in flooring even & smooth surface without using extra cement complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 Type B-2 ( using 40mm graded agg ) as in flooring even & smooth surface without using extra cement complete all as specified and directed.

M&L for cement concrete type B-1 1:2:4 as in coping, kneelers, apex stones, bed plates, kerbs haunching and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Supply only water proofing compound ISI marked complete all as specified and directed.

Forming constraction (Dummy) joints 65mm deep x 10mm wide filled with grade 'A' sealing compound complete all as specified and directed.

S&F steel work as for post including guset plate of suitable size welded at both ends for anchoring and for fixing of purlin and rafter including special shaped washers etc complete all as specified and directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connnected to common rafters and running rails etc conf to Fe 410- W complete all as specified and directed.

S&F for pre-laminated galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed.

ANIL CONSTRUCTION

M/S KAUSHIK CONSTRUCTION

M/S S S A ASSOCIATES

DEEP ENTERPRISES

Khushi Muskan Engineer & Developer