PROVN OF DEFI STORAGE SHED FOR ORD STORES AT TECH AREA AND FENCING TOWARDS HOOGLY SIDE SECURITY PRONE ZONE AT DAKSHINESWAR UNDER GE N KOLKATA

Amount

Surface excavation n.exc.30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified & directed.

Excavating in trenches, not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation etc and getting out in Soft/loose soil complete all as specified & directed.

Excavating over areas, n exc 1.5m deep and getting outin soft/loose soil complete all as specified & directed.

Material and labour for providing cement concrete in foundations 1:4:8 type D2 ( using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed

M&L reinforced cement concrete RCC 1:1.5:3( using 20 mm graded some aggregate) in foundations, including rafts, footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete , all as specified and directed.

M&L reinforced cement concrete RCC 1:1.5:3 ( using 20 mm graded some aggregate)in beams, cantilevers, bressummers, lintels over 1.5m span, all as specified and directed.

M&L reinforced cement concrete RCC 1:1.5:3 ( using 20 mm graded some aggregate) in columns, pillars, piers,posts and struts , all as specified and directed.

M&L reinforced cement concrete RCC 1:1.5:3 ( using 20 mm graded some aggregate)in chajjas and like , all as specified and directed.

M&L reinforced cement concrete RCC 1:1.5:3 ( using 20 mm graded some aggregate) in slabs supported on walls, beamsand columns in floors, landings, balconies,canopies, deck slabs and in shelves and the like, all as specified and directed.

M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.

M&L formwork to sides and soffits of floor beams and roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhang, etc. also splays between floor and beams etc. all as specified and directed.

M&L formwork to sides of pillars,posts,struts,piers, columns and stanchions, all as specified and directed.

M&L formwork to chajjas, through and similar items including edges, all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; not exceeding 200mm thick ( horizontal or sloping) all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Al as per Item no. 15, but 6 to 8mm dia.

Al as per Item no. 15, but 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders all as specified and directed. Make for item nos. 15 to 17:- :-Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed

M&L 40mm thickcement concrete 1:2:4 ,type B-0 as in damp proof course to horizontal or vertical surfaces including necessary form work.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 20 mm thick rendering with CM 1:4 in two layer , 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finish the surface even and fair complete all as specified and as directed ( Water proofing liquid admixture shall be measured and paid seperately )

Supply only integral water proofing liquid administure for concrete / mortar. Make: CONPLAST X421IC of Fosroc/ PLASTOCRETE PLUS OF SIKA/equivalent brand of PIDILITE)

M&L for applying wall care putty and appling two coats of oil bound distemper, first quality, over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed.

Material and labour for preparation of new plastered suface and applying two coats of cement base paint, first qulity, over a coat of cement primer complete all as specified and as directed. Make for item nos. 24 & 25:- Asian / Berger / jenson & Nicholson / Shalimar.

Rough excavation not exceeding 1.5m deep and getting out soft/loose soil,complete all as specified and directed.

Returning filling including spearding levelling watering and well ramming in layer n. exc. 25 cm in soft/loose soil copmplete all as specified & directed.

Removing excavated soil n.exc 50 mtr and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified .

Spreading and levelling in layers n exc 25cm thick and well ramming including watering as required ,complete all as specified and directed.

M&L Hardcore of gauge exc.63mm but not exc. 100mm ,deposited,spread and levelled in layers n.exc. 15cm thick,watered/rammed to a true surface complete all as specified and directed..

M&L Sand filling under floors or in foundations including watering and consolidation , complete all as specified and directed.

M&L 100mm thick cement concrete type D2 , 1:4:8(40mm graded aggregate) as in sub base of floors complete all as specified and directed.

M&L 40mm thick cement concrete type B1 , 1:2:4(20mm graded aggregate) surface finishen even and smooth without using extra cementas in floors complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement mortar 1:4 laid with grey cement slurry and joint with cement slurry with pigment to match to the shade of the slab including rubbing and polishing complete.

M & L for Kota stone slab 20 to 25mm thick in riser of steps,skirting,dado and pillar laid over 10mm thick cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand and finished the surface fair and even complete all as specified & directed.

S&F rolled section of grade Fe-410W(Gde E-250) quality A as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and fixed with angle cleats or other connecting plates by welding complete all as specified and directed.

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed. Make for item nos. 37 & 38:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 Mpa (Galvalume base-PPGL trapezoidal profile sheets) fixed with aluminium self tapping screws of size 50/75mm and aluminium washer of suitable size in roof covering complete all as specified and as directed. Make:- M/STataBluescope steel ltd. (colorbond steel) or equivalent in M/S JSW Steel Ltd / M/S Ispat Industries Ltd./ M/S Bhusan Power & Steel Ltd. ) /Sshivshakti Fibre Udyog (Roofitt) / M/S Prestar Infrastructures projects LTD./ Jindal.

Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. Specie:-Sal / Bijasal / Benteak / Laurel/Hollock ,Chikrassy/, Gamari/, badam /kalasiris. .

S & F 35 mm thick 2nd class hard wood factory made plain, framed, panelled shutters (two panel) with lock rail and panel of 9 mm BWP commercial ply 12 mm veneered particle board with commercial on both faces. The size of rail and stiles as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated. Specie:-Sal / Bijasal / Benteak / Laurel/Hollock ,Chikrassy/, Gamari/, badam /kalasiris. Make:- M/s Ambika timber Works, Bikna (Patel Nagar), P.O. Keshlakole, Bankura, W.B./ M/s Premier Wood Craft (P) Ltd., Jessore road, P.O. Ganganagar, Dist – 24 Parganas( West Bengal) / Door kings, Kolkata / Jain Doors PVT Ltd / M/s Supreme Doors and allied products.

Supply and fix steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars for glazed shutters, dovetailed or welded. Make:- M/s Modern Fabricators, 23E , Radha Madhab Dutta Garden Lane, Kolkata -10./M/s BA Enterprises, south Stn Road, Agarpara (Salpatabagan), Kolkata – 109. /M/s Sen Harvic, Vora Building, 1st Floor, 50 Nakhoda Street Bombay. /M/s Multiwyn Industrial corporation 3-B, Camac Street, Kolkata – 16 /M/s Agew Steel Manufactures PVT Ltv 522/1, Outside Pachkuva, ahmedabad – 380002 /M/s Doorwyn Industries, 55 Dharmatala Road, Salkia, Howrah ( WB) /M/s Hopes Metal Industries Ltd., P-23 Transport Depot Road , Kolkata – 27 /M/s Ankur Industries, 726 Andul Road (Podra), P.O. Denesh sheikh Lane, Howrah – 711109./M/s Steel Engineers, 203 KabigururabindraNath, Kanchrapara , 24 Parganas(N) WB /M/s NCL Altek and Seccolour Ltd, Hyderabad /M/s Bihar Boddin&Engg work, Katihar (Bihar) / M/S GS Udyog / BA Industries.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed. Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Supply and fix steel windows for industrial buildings fixed type with glazing bars, complete with glazing bars for glazed shutters, dovetailed or welded. Make:- M/s Modern Fabricators, 23E , Radha Madhab Dutta Garden Lane, Kolkata -10./M/s BA Enterprises, south Stn Road, Agarpara (Salpatabagan), Kolkata – 109. /M/s Sen Harvic, Vora Building, 1st Floor, 50 Nakhoda Street Bombay. /M/s Multiwyn Industrial corporation 3-B, Camac Street, Kolkata – 16 /M/s Agew Steel Manufactures PVT Ltv 522/1, Outside Pachkuva, ahmedabad – 380002 /M/s Doorwyn Industries, 55 Dharmatala Road, Salkia, Howrah ( WB) /M/s Hopes Metal Industries Ltd., P-23 Transport Depot Road , Kolkata – 27 /M/s Ankur Industries, 726 Andul Road (Podra), P.O. Denesh sheikh Lane, Howrah – 711109./M/s Steel Engineers, 203 KabigururabindraNath, Kanchrapara , 24 Parganas(N) WB /M/s NCL Altek and Seccolour Ltd, Hyderabad /M/s Bihar Boddin&Engg work, Katihar (Bihar) / M/S GS Udyog / BA Industries.

Supply and fix 3mm thick sheet glass in repairs of ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane and complete all as specified and as directed. Make:- Saint Gobain, Modi Float, Triveni Float Glass, Crown,/ Pilkington Glass.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed. Make:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed. Make for item Nos. 48 to 50:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag.

Material and labour for applying two coats of synthetic enamel paint, first qualiy, on new steel surface exceeding 10 cm width or girth over a coat of red oxide primer including preperation all complete as specified and as directed .

Material and labour for two coats of synthetic enamel paint, first quality, a coat of red oxide primer on steel surfaces of any description not exc. 10cm width or girth including preparation of new surfaces complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed. Make for item Nos. 51 to 53:- Asain / Berger / Jenson & Nicholson / Shalimar.

Material and Labour for PCC 1:2:4 Type B1 ( using 20 mm graded stone aggregate ) as in coping including necessary formwork complete all as specified and as directed .

Supply and fixed 1.25mm thickness of lath Steel rolling shutters including guide rails, gear operated type with chain wheel and handle chain, as specified including top cover, anchoring rod , hasp and staple and one shop coat of primer; erected in position as indicated complete all as specified and directed.

Supply and fixed safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. Make for item Nos. 55 & 56:- :- M/s Modern Fabricators, 23E , Radha Madhab Dutta Garden Lane, Kolkata -10./ M/s BA Enterprises, south Stn Road, Agarpara (Salpatabagan), Kolkata – 109./ M/s Multiwyn Industrial corporation 3-B, Camac Street, Kolkata – 16 / M/s Agew Steel Manufactures PVT Ltv 522/1, Outside Pachkuva, ahmedabad – 380002. / M/s Doorwyn Industries, 55 Dharmatala Road, Salkia, Howrah ( WB). / M/s Hopes Metal Industries Ltd., P-23 Transport Depot Road , Kolkata – 27. / M/s Ankur Industries, 726 Andul Road (Podra), P.O. Denesh sheikh Lane, Howrah – 711109./ M/s Steel Engineers, 203 KabigururabindraNath, Kanchrapara , 24 Parganas(N) WB.

Excavation in post holes ( or similar holes) each n exc 0.5cum, getting out,returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in soft/loose soil.

Removing excavated soil n.exc 100 mtr and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified .

Material and labour for providing cement concrete in foundations 1:2:4 type B2 (nominal mix using 40 mm graded stone aggregate) filling and mass concrete for securing/ fixing of fencing post/ strut in under water including necessary formwork and dewatering as required at site complete all as specified and directed.

Material and Labour PCC 1:3:6 Type C1(using 20 mm graded stone aggregate) as in bed block for fixing holdfast , coping , kerbs, rounded or chamfered on edge including necessary form work complete all as specified and as directed .

Supply and fix rolled mild steel Fe-410 (Grade E-250A) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 Nos gaps/cuts/holes in each post for providing/laying barbed wire and one coat of red oxide zinc chrome primer after preparation of new steel surfaces complete all as specified and as directed. (Note :- Supply and fix barbed wire shall be measured and paid separately)

Supply and fix mild steel wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire,etc.; flat iron fillets( for securing wire mesh etc.) including all necessary dilling , bolting or riveting etc; and similar work conforming to Fe-290 Gde E-165.

Supply and Fix mild steel 10 mm diameter of shank screw bolts (machine made) with hezagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 15 cm and n.exc 22.5 cm long complete all as specified and directed. (Bolt to be embeded into RCC fencing post while casting)

Supply only MS 10 mm dia round bars (Fe-410-W (Gde E-250 quality-A or Fe 290 (Gde - E-165)) as line wire for holding chain link mesh including applying two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and directed. Make for item Nos. 61 to 64:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal. .

Supply,fixing Galvanized, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings, conforming to IS, and straining and fixing to any type or standard rails. Straining bolts. Including, securing or tying at crossings with and provn of galvanized mild steel wire staples or steel pins etc complte all as specified and directed (Note : Each line of wire to be measured seperately)

Supply only chain link fencing 50 mm x 50 mm mesh 4 mm thick, made out of mild steel galvanised hot drip wire, conforming to IS, including provision of binding wire completed all as specified and directed.

Fixing only chainlink fencing including line wires , any mesh , size and type to any type of standards , rails , straining bolts etc including provision of binding wire complete all as and as directed .

Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed.

All as per item No 68 here-in-before but for one 3/5 pin 6 Amps socket outlet on the same board with other switches all as specified and as directed. .

All as per item No 68 here-in-before but for one 3/5 pin 6 Amps socket outlet on the independent board all as specified and as directed. .

Material and labour for point wiring (Concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified as directed. Note for item Nos. 68 to 71: (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be measured and paid separately. Make :(i) Cable -Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel. (ii)Conduit - Plaza / Presto Plast / Precision/ M/S AGK Industries.

Supply and fix switch piano flush button 6 Amp single pole, one way complete all as specified and as directed .

Supply and fix socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.

Supply and fix Switch socket combination 5 Pin, 6 Amp flush type complete all as specified and as directed..

Supply and fix switch socket combination 5 Pin 6/16 Amp flush type with complete all as specified and as directed.

Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals all as directed.

Supply and fix electronic fan regulator stepped type flush type AC 240 volt complete all as specified and as directed. Make for item Nos. 72 to 78 :-Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard

Material and labour for sub-main wiring (Concealed type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductors of size 2.5 Sq mm and one run of 2.5 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site complete all as specified and as directed. Note:- (i):Three run of 2.5sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC conduit shall measured as one unit). (ii): Chases cutting for wiring etc is including in this item). Make :(i) Cable - Havells/ Finolex / Polycab (ii)Conduit - Plaza / Presto Plast / Precision

Supply and fix powder coated sheet metal enclosure (in concealed) single pole & neutral for DBs (DOUBLE door)8 way with 200 amps rated busbar DIN channel, neutral link & earth link superline all as specified as directed.(Chase cutting & make good disturb surface is included in unit rate) Make: Havells / L&T / Legrand

All as per item No 81 here in above but for 12 way SPN DB.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified as directed Make :- Havells/Usha/Crompton/Orient

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified as directed Make :- Havells/Usha/Crompton/Orient

Supply and fix MCB single pole & neutral 6 to 40 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. Make: Havells / L&T / Legrand

Supply and fix MCB single pole 6 to 40 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. (i) Cost of lugs shall be included in the unit rate. Make: Havells / L&T / Legrand

Supply and fix LED complete batten of extruded alluminum and PC diffuser of 18/20 /22 Watt and two Nos 2nd class hard wood round block and connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fittings etc complete, all as specified and as directed. Make:-(i)C&S Cat Part No: NAKSHATRA/20W (ii) HAVELLS Cat Part No: LUMILINEPLUSBS20WLED865SPCSS (iii) JAGUAR Cat Part No: LGLZ01X020C / Panasonic Cat No PBTM08208/ BAJAJ CAT no. BCLAB20WH LED P

Supply and fixing LED light fitting 25 watt energy saving versatile pressure die-cast aluminium building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete ,all as specified and as directed. Make : (i)C&S Cat Part No: INDUS25WLED/LS (ii) HAVELLS Cat Part No: ENDURAPEARLSL25WLED757SASYTOPC (iii) JAGUAR Cat Part No:LPCRSRT25WXC /Panasonic Cat No PSTM27258/ BAJAJ CAT no. ENXT P 30L WH SY PC SD

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holderS & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible opper conductor cable of suitable size all as specified and as directed. Make:- Havells/BAJAJ / CENTURY / Crompton / Jaguar/Panasonic . .

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) with Funnel for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 5 of SSR Pt I complete all as specified as directed

Supply and fix GI wire 4.0 mm as earth continuity conductor all as specified and as directed.

Supply and fixGI pipe 15 mm bore (dia), light-grade for protection of earth electrode all as directed and as specified.

Supply, Laying,connecting,testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable with stranded alluminium conductors 16 sqmm x 2core,1100 Volt grade, laid in trenches / surface / wall / roof / pole / through pipe ,compleate all as specified and as directed Note :- (i) Pipe and bricks for cable protection and sand cushioning shall be measured and paid separately as per site . Make M/s Havells / M/s Polycab / Finolex.

Material and labour for sand cushioning with clean dry sand in trenches for cable protection complete all as specified and as directed. Note:- Punned depth shall only be measured and paid.

Supply and lay sub class 'B' bricks dry in trenches for cable protection laid with its longitudinal axis perpendicular to the cable axis complete all as specified and as directed.

Supply and lay GI pipe 50 mm bore (dia) light grade in trenches/road/surface/pole/wall crossing for protection of cable with necessary fittings as required complete all as specified and as directed. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal / Nezone / M/S BST Infratech Ltd.

Cutting hard standing / road for laying of cable / protection pipe complete all as specified and as directed.

M/S SHEKHAR TRADING CORPORATION

RADHA ENTERPRISE

M/s P.K.Ghosh

NANDYENTERPRISES

BHARUKA ENTERPRISES

RUNJEN CONSTRUCTION

ELECTRO COMMERCIAL CO