138WE/L-178/2025-26

Amount

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) etc. any thickness including covered fillets and supporting members, complete all as specified and/or directed by Engr-in-Charge.

Dismantling framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc. under 40 sqcm in section, complete all as specified and/or directed by Engr-in-Charge.

Taking down chowkat or frame with shutters (without taking of shutters from the frame) not exc 1.5 sqm each any type of door (wooden, aluminium & steel etc.) complete all as specified and/or as directed by Engr-in-Charge.

Taking down chowkat or frame with shutters (without taking of shutters from the frame) exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc.) complete all as specified and/or as directed by Engr-in-Charge.

Dismantling boarding/ wooden flooring of any description, fixed in any position, complete all as specified and/or directed by Engr-in-Charge.

S&F anodised aluminium snap grid of size 605 x 605mm , frame work of false ceiling including hangers 6mm dia G.I (up to 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed by Engr -in-charge

S&F Gypsum board 9 mm thick and 600x600mm in size in ceiling fixed with screw or with staples on snap grid as per manufactures instructions, complete all as specified and directed by Engr-in-charge

M&L for 15-20mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

All as per srl item No. 08 above, but on ceiling.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and not exc 25 sqcm in section, complete all as specified and directed by Engr-in-Charge

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 6 sqcm and not exc 13 sqcm in section, complete all as specified and/or as directed by Engr-in-Charge.

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated, including backing with thermocol sheets, over 6 micron polythylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified by manufacture all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and/or as directed by the Engr-in-Charge.

M&L for powder coated aluminium door shuttlers, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, hinge type B-21 100 mm longs (3 Nos) suitable handle (2 Nos) (Glass / Wiremesh should be measured seperately) complete all as specified and/or as directed by Engr-in-Charge.

S&F anodised aluminium window and ventilator shutters, including aluminium jali fixed in one side, side hung type without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos) suitable handle (1 No) etc. complete all as specified and/or as directed by Engr-in-Charge.

M&L sheet glass 4.80mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc. 0.50 sqm in each pane complete all as specified and as directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

S&F in repairs fancy type 15 mm bore Stop valves, chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure screwed both ends for iron pipe or for unions. complete all as specified and as directed.

S&F soap dish, chromium plated, oval shape, fixed to plugs with chromium plated brass screws completed all as specified and directed.

S&F in repair grating doom 125mm dia of PTMT (min weight 40gms) with waste hole complete all as specified and/or directed by Engr-in-Charge.

Supply only flushing cistern of PVC 10 ltr. cap., white colour, valveless symphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/ gel gasket etc as recommended by manufacturer for fixing, packing, complete all as specified and/or directed by Engr-in-Charge.

S&F in repair Toilet paper holder of brass, chromium plated, complete all as specified and/or directed by Engr-in-Charge.

S&F in repair Health faucet (ABS Body) mild steel, chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and/or directed by Engr-in-Charge.

S&F in repair Vitreous China wash down water closet (Pedestal), white (EWC) excluding fixing bolts, flushing cistern and flush pipe, including plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including connection to drain pipe and to flushing pipe antisyphonage pipe etc., complete all as specified and/or directed by Engr-in-Charge. Make : CERA/JAQUAR/KOHLER or equivalent.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and/or directed by Engr-in-Charge.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal of 110mm bore with oval acess doors complete all as specified and directed by Engr-in-Charge.

S&F 75 mm dia PVC (SWR) bend any radius, complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bend any radius, complete all as specified and as directed.

S&F PVC (SWR) 75 mm dia, floor trap, plain with grating including jointing to waste pipe with solvent cement., complete all as specified and/or directed by Engr-in-Charge.

S&F in replacement 25mm dia 3 layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engr-in-Charge.

S&F in replacement 32mm dia 3 layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engr-in-Charge.

S&F in repairs fancy type 15 mm bore chromium plated bib taps, cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

S&F 15mm bore, PVC connection pipe 450 mm long with PTMT nuts at both ends, complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) including complete fittings such as switches, ceiling rose, regulators, socket etc. and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as specified and directed by Engr-in-Charge.

Point wiring complete with 1.5 sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5 sqmm copper conductor cable as continuous earth lead complete all as specified and/or directed by Engr-in-Charge for the followings:-

One light/exhaust fan point controlled by one way switch.

One switch socket outlet 6 Amps, 230 volts point on same board.

One switch socket outlet 6 Amps, 230 volts point on independent board.

All as per Srl item No 36 above, but using cables 4 Sq mm size.

S&F modular switch, 6 Amps, 230 volts, one way, 1 module complete all as specified and/or directed by Engr-in-Charge.

S&F modular socket outlet two in one 3 pin, 6 Amps flush type.230 volts, combined 2 module, complete all as specified and/or directed by Engr-in-Charge.

S&F modular bell push 5 Amps 2 module flush type complete all as specified and/or directed by Engr-in-Charge.

S&F door bell, electric ding dong/ musical type, 230 volts, single pole, complete all as specified and/or directed by Engr-in-Charge.

S&F modular Socket 3/5 pin multi purpose, 6 Amps and 16 Amps 230 volts complete all as specified and/or directed by Engr-in-Charge.

S&F modular switch, 16 Amps, 230 volts, one way, 1 module complete all as specified and/or directed by Engr-in-Charge.

Supply and fix in replacement lamp holder insulated body with back plate complete all as specified and directed.

S&F ceiling rose, surface Bakelite three terminals complete all as specified and/or directed by Engr-in-Charge.

S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 Ways complete all as specified and/or directed by Engr-in-Charge.

S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 08 Ways complete all as specified and/or directed by Engr-in-Charge.

S&F MCB SPN 63 Amp 240 Volts, 10 KA, C Curve, AC ISI marked complete all as specified and/or directed by Engr-in-Charge.

S&F MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as specified and/or directed by Engr-in-Charge.

Taking down old unserviceable exhaust fan and supply and fix exhaust fan, steel body AC single Phase, 230V of size 250m sweep with, blades, and frame and louvers, complete all as specified and/or directed by Engr-in-Charge. Note : Old unsv fan shall be deposited to MES E/M store.

S&F in replacement LED light fitting 1x20W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and/or directed by Engr-in-Charge. Make : Havells /Crompton / Bajaj or equivalent.

S&F in replacement of inverter led bulb b-22 cap with opal diffuser, IP20 and inbuilt battery back up of 10 watt capacity, complete all as specified and/or directed by Engr-in-Charge.

Supply, install, testing complete water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes etc. including taking down the existing one complete all as specified and/or directed by Engr-in-Charge. Note : Old unsv water heaters retrieved from site shall be deposted with MES store yard.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and including 4 mm dia GI wire as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 3 of MES SSR Part I and testing on completion including excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS frame and cover 6 mm thick in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM (weight not less than 4 Kg per Sqm) with cast iron frame, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and/or as directed by Engr-in-Charge.

Mehar Enterprises (BID ID -3434717)

M/S Praveen Kumar and Sons (BID ID -3442957)

R B TRADERS (BID ID -3436302)