Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹23.9 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹25.4 L+₹1.5 L (6.31%)Rejected-Finance RAWALPORA WANABAL PATI YAYIL POST OFFICE SANAT NAGAR SRINAGAR 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L-2 | Rejected-Finance other than L-1 | |
| 3 | L-3₹25.5 L+₹1.5 L (6.45%)Rejected-Finance | L-3 | Rejected-Finance other than L-1 | |
| 4 | L-4₹26.6 L+₹2.7 L (11.2%)Rejected-Finance | L-4 | Rejected-Finance other than L-1 |
Tender Value
₹29.5 L
EMD Value
₹59,000
Closing Date
27 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt. Col Preetham P GE
GE 970 EWS C/o 56 APO PIN-913970
PROVN OF RECREATION ROOM AT OAF UNDER GE 970 EWS
2024_MES_644297_1
GE 970 EWS-74/2023-24
Open Tender
Civil Works
Item Rate
270 days
SCANNED COPY OF GST NUMBER
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹59,000
Yes
24 May 2024
27 Feb 2024
2 Apr 2024
27 Feb 2024
27 Mar 2024
14 Mar 2024
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and diredted.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in any type of soil, complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and directed.
Removing excavated material/soils not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed
M & L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, complete all as specified and directed.
M&L for RCC M25 (Design Mix) 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M25 (Design Mix) 20 mm graded stone aggregates as in Columns, pillers, peir, posts, and struts complete all as specified and directed.
M&L for RCC M25 (Design Mix) 20 mm graded stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M&L for RCC M25 (Design Mix) 20 mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves and the like complete all as specified and directed. (Note for BOQ item No 6 to 9: Design of structure shall be got approved by the competent authority)
Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical surfaces complete all as specified and directed.
Use and waste form work rough finished surface of concrete as in Square, rectangular or polygonal to sides of columns, pillars etc.
Use and waste form work to sides and soffits of floor or roof beams, lintel beam , cantilevers, shelves etc.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifed .
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and incl binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed
Description all as item No 14 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders etc.
M&L for brick work with sub class 'B' (old size) brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6, complete all as specified and diredted.
M & L for Plastering 15 mm thick in in Cement Mortar 1:4 on Fair Faces of Brick Wall, Cement block wall or on Concrete Surfaces, Surface Finished Even and Smooth without using extra Cement, complete all as specified and as directed.
M&L for 12 mm thick rendering on brick work or concrete surfaces of internal wall in cement mortar 1:6 Surface Finished Even and Smooth without using Extra Cement complete all as specified and as directed.
M & L Preparation of newly plastered surface and apply two coat of cement base paint , complete all as specified and directed.
M & L preparation on newly plastered surface apply two coat oilbound distemper over coat of wall primer over and incl wall care putty, complete all as specified and directed.
Moorum / Red Bajari filling in floor or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
M&L for 100 mm thick PCC 1:4:8 Type D 2 ( using 40 mm graded stone aggregate ) as in floor sub base, complete all as specified and directed.
M&L for 25 mm thick PCC Type 1:2:4 ( using 20 mm graded aggregate) as in floor finish to receive top finish of floor/ tiles, complete all as specified and directed.
M&L for vitrified ceramic tiles light shade pattern as required 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matches with and including 15mm thick screed bed in CM 1:6 compete all as specified and directed by Engr-in-Charge
Description all as item No 24 above but on skirting over with and including 10mm thick rendering/ backing coat in CM 1:4, complete all as specified and directed .
M&L for Granite (of any type) tiles, 18-20 mm thick machine cut laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone as in slab , window sills sides fo slab etc including cutting and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:4 and all as specified and directed .
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed .
BLANK
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection/foot path etc. complete all as specified and directed .
Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A, complete all as specified and directed .
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, including welding gusset plate, welding at factory or at site fixing over roof beams, steel conforming to Fe-410 (Gde E-250) quality 'A' , complete all as spcified and direction.
M&L for Rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, vertical post for verandha , fixed with angle cleats or other connecting plates etc confirming to Fe 410-W-(Gde-E-250) quality-A, complete all as specified and directed. Note :- Fabrication of roof truss, purlins post , rafter etc cutting , welding, bending , or any other nature of work shall be at site or shop deem included in quoted rate.
S & F Plates (plain or chequered) channels , square or beams cut or notched (ordinary and counter sunk) forming holes, without any attachments or with rivited, bolted ot welded attachments, etc steel conforming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed. Note - cutting to require size and welding or boulting to Beam , post, rafter shall be at site, rate deem included in quoted rates.
S & F Pre-painted galvalum aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength as in roof covering/clading to wall , it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.
S & F Pre-painted galvalum aluminium zinc coating GI based plain steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws all as specified and directed.
S & F Mild steel bolts of exc 20 and not exc 25 mm dia , purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long complete all as specified and directed.
M & L for preparation of new steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer completed all as specified and directed.
S&F 12mm thick Gypsum board for ceiling fixed with GI Powder coated snap grid 605 x 605mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden member by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners complete all as specified and directed by Engr-in-Charge.
S&F factory made box type mild steel windows side hung glazed shutters with chowkets with glazing bars to receive glass and other side of the window wire mesh shutters to receive wire mesh or wire guage dovetailed or welded and steel peg stay with and including necessary welding , reveting, tower bolt, handle, hold fast & hinges, complete all as specified in Drg No CESZ/TD-1018/2011 sheet No 1/3 to 3/3. (Note: measurement of Guard bars shall be paid separately).
BLANK
M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.
S & F Galvanised steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.
S & F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete .
M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed complete all as specified.
M&L Preaparation surfaces of wood and wood based materials and treated with tar to backs of chowkhats etc. area tarred exc 0.10 sqm but not exceeding 0.50 sqm each complete all as specified.
M&L preparing surfaces of wood and wood based materials , steel and iron work , new or old , of any description and girth, not otherwise described , and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkhats, etc.'area tarred n exc 0.1 sq.m each with tar or coal tar black paint all as specified.
S & F 35mm thick 2nd class hard wood Plain framed panelled shutter(any number of panels) with panels ot timber flat on both sides (feather edged), or of veenerd pparticle board medium density, wood particle board with commercial face veneers, fixed to chowkats complete all as specified and directed.
S&F 35 mm thick, 2nd class Hard wood ( sal) Glazed and skeleton door shutters , open rebated and prepared to receive glass, gauze, etc. ( without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass/gauaze complete all as specified.
M & L for preparing new wood or wooden based surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete.
S & F 100mm size butt hinges, medium weight, cold rolled mild steel complete.
S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.
S & F 150mm size aluminium handles cast type, anodised ISI marked complete
S&F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.
M&L for hard core of guage exc 63mm broken stone or boulders, deposited spread and levelled in layers n exc 15cm thick, watered, rolled and rammed to a true surface complete all as specified and diredted.
M & L for 60 mm thick interlocking paver block of M-30 mix with grey cement and pigment , laid over and incl 30mm thick dry sand cushioning,filling of joints, compaction after filling of joints , complete all as specified and as directed.
M & L Precast cement concrete block Type B1 1:2:4 (20 mm graded aggregate) masonry with solid blocks exc 10 cm in width and setting in mortar 1:6 complete all as directed and specified.
M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in coping, complete all as specified and as directed.
Point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLS-H) drawn through and including concealed PVC conduit (ISI marked) not less than 20mm dia and accessories (fixed on wall/ceiling surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable (FRLS-H), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed.
All as per description of srl item No 58 here-in-before but switch socket out let 3 pin, 5 Amp on independent board.
All as per description of srl item No 58 here-in-before but switch socket out let 3 pin, 5 Amp on same board
All as per description of srl item No 58 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 2.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin switch socket combination, 15 Amps on independent board.
S&F Switch piano flush button single pole one way 5 A, 240 V complete all as specified and directed.
S&F Switch socket combination 2 in 1, 5 Amp flush type, 240 V, complete all as specified and directed.
S&F Switch socket combination 5/15A, 5 in 1, 3 pin, 240 volts complete all as specified and directed.
S&F Ceiling rose, surface bakelite, 65 x 50 mm, three terminals, 240 volts complete all specified and as directed.
S&F Socket outlet 2 in 1, 3 pin, 5 Amp flush type, 240V complete all specified and as directed.
S&F MCB DB TPN 4 way, 230 Volt with 415 A rated bus bar double door type complete all as specified and as directed.
S&F MCB DB SPN 8 way, 230 Volt with 200 A rated bus bar double door type complete all as specified and as directed.
S&F MCCB TPN 200 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
S&F MCB SPN 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
S&F MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
S&F LED lamp 1 x 9 watts suitable for pin type batten/pandent holder complete all as specified and directed.
S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
Supply and fixing energy efficient surface Mounted LED Luminire 18/20 watts 4' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr all as directed.
Material & labour for Earthing complete with GI earth plate 60x60cmx6mm thick, burried directly in ground (Earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron as earthing lead or steel all as shown in electrical plate No.3 and incl earth work, PCC pit and RCC cover, watering pipe 20mm dia medium grade, funnel, wiremesh, charcoal dust, 15 mm dia light grade protection pipe and salt etc and connected to earthing test point incl necessary earth work, testing, complete all as specified and directed.
Material and labour for sub main wiring with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 4 sqmm 1100 volts grade drawn through in & including concealed PVC conduit 25mm dia & 2.5 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 4 sqmm and one run of 2.5 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
Material and labour for sub main wiring with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 6 sqmm 1100 volts grade drawn through in & including concealed PVC conduit 25mm dia & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 6 sqmm and one run of 4 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
Sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed.. Note :- For payment purpose punned thickness shall be measured.
Brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.
1100 volt grade XLPE insulated heavy duty cable, 50 sqmm 3.5 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches complete all as specified and directed. Note : Excavation & Earthwork shall be measured and paid separately.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.
Supply and fixing 1 x 70 watts LED street light made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection for building security lights complete all as specified and directed.
Supply and fixing fancy type light fitting along with LED light, bracket and fittings for 10/11 watt LED light complete all as specified and directed.
FIRDOUS AHMAD BABA
M/S SHOWKAT AHMAD WANI AND SONS
SOFI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .