PROVN OF STONE MASONRY BDY WALL AT TRG AREA, CHAIN LINK FENCE AT QTR GUARD OF 729 UNIT, REPAIR TO DRAINAGE, HARD STANDING AND EXT PAINTING TO GODOWN AT CSD DEPOT, CERTAIN REV AND MINOR WORKS UNDER AGE B/R (S) NO I AND II OF GE (SOUTH) SECUNDERABAD

Amount

Site Clearance in any type of soil

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation and getting out in any type of soil. complete all as specified and directed.

Returing and filling in including spreading, levelling watering and well ramming in layers n.exc 25cm thickness in hard dense soil.

Removing excavated materials n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point.complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard or dence soil.complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil complete all as specified and directed.

M&L for sand cushion 20 to 30mm thick for fixing of inter locking tiles complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (40mm graded stone aggregate) in foundation, filling and mass concrete.complete all as specified and directed.

M&L for Type B2 1:2:4 (40 mm gradaed aggregates) Cement concrete in foundations, filling and mass concrete complete

M & L for PCC 1:3:6 type C1 20mm graded aggregate as in coping, seismic and other similar bands, plinth courses, string courses, latching courses, appex stones etc.including necessary formwork complete all as specified and directed.

Plain Cement Concrete Type E2 1:5:10 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete.

M & L Plain cement concrete type-B1(1:2:4) (using 20mm graded stone aggregate ) as in benching, coping etc incl necessary form work.complete all as specified and directed.

Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) in roof kerbs, mud stops or chamfered on edges.complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L brick work with subclass B bricks ,straight or curved on plan exc 6m mean redius built in cm 1;6 complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6 m mean redius built in cement mortar 1:4. complete all as specified and directed.

Cutting holes into or through brick walls n exc 150 Sq cm built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required

Cutting holes into or through brick/stone walls built in cement mortar, depth of embedded portion of holdfasts of lugs measured from the face of the jam into the wall.

M&L for stone masonry randum rubble un-coursed well bounded bedded and solidly hearted in CM 1:6 (Secunderabad type). complete all as specified and directed.

S& F of SS 304 grade 50mm dia pipe for handrails complete all as specified.

S& F of SS 304 grade 40mm dia pipe for balusters complete all as specified.

S& F of SS 304 grade 20mm dia pipe for bracings complete all as specified.

S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm.

S&F MS angle iron as in posts and struts as in fencing including cutting tops to shape as directed, drilled holes notching for wire etc incl all necessarydrilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165.

S&F galvanised two strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts ,including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins. complete all as specified and directed.

S&F for posts and struts in fencing including embedding in concrete and screwing etc. including securing bolts;cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0. complete all as specified and directed.

Supply only Chain link MS galvanised fencing, of any size or type.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.complete all as specified and directed

M&L 5 to 10mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clipscomplete all as specified and directed

Roof trusses (framed), trussed, purlines, crane gantries, rails & fastnings & heavy brackets framing (Beam,tee,angle,channel or flat sections including distance pieces cleats etc (fe 410-W(Gde-E-250) quality-complete all as specified and directed.

S & F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed

M & L for framed work such as grills, gratings etc with ends of bars, frames guard bars, ladders etc and similar works conforming to Fe-290 Gde E-165.complete all as specified and directed

S&F 12.5 mm thick gypsum board seamless false ceiling fixed with standard GI section such as channels, angles the grid suspended with GI suspender and cleat from soffit of slab with expension fasteners. Gypsum board shall be fixed with screwe to the ceiling section/grid. The board shall be 12.5mm thick and the soffit of board shall be finished with gypsum plaster and levelled to give flush look as per manufactcurer's instructions incl necessary cutting for light fitting and AC and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. .

S & F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design complete all as specified and directed.

M & L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry with grey cement and pigments in floors over a 20mm thick screed bed in CM 1:6.complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors, set and jointed in neat cement slurry and pointed in colour cement to match and including laying over 15 mm thick scred bed in CM 1:6 over 25mm thick PCC (1:2:4) in sub base complete all as directed and as specified by Engineer-in-charge.

M & L glazed ceramic coloured tiles in vertical surface 300x200x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over 10mm thick packing coat of plaster in cm 1:3 on wall, complete all as directed and as specified by Engineer-in-charge.

M&L for raised pointing to random or polygonal rubble uncoursed or brought upto course in cm 1:4 complete all as specified and directed.

M&L for preparation of new steel surfaces of any discripton not otherwise discribed over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide on steel surfaces complete all as specified and directed

Rendering 15mm thick in CM 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and directed

M&L for Rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of walls finished even and smooth w/o using extra cement complete all as specified and directed.

Taking down cement plaster/terrazzo finish on brick/RCC/Stone walls of any description including racking out joints hacking for keys scrubbing down with water etc. complete all as specified and as directed.

M & L for complete removal of existing treatment , Preparing old surfaces on walls and Priming surfaces with alkaliresistant priming paint to obtain smooth regular/even finish by using sand paper and applying two coats of exterior emulsion (Apex paint) on exterior walls surface complete all as specified and directed.

M&L complete removal of existing treatment and washing down from wall surfaces and applying two coats of oil bound distemper over applying two coat of Altek superfine putty over one coat of alkali resistant primer and complete all as directed .

S & F for complete removal of exisitng wall treatment and applying two coats of distemper oil emulsion on walls over a coat of primer complete all as specified and as directed

S & F 3mm thick sheet glass ordinary quality fixing with putty in square n.exc 0.5 sqm in each pane.complete all as specified and directed

Preparation of old painted wooden surfaces exc. 10cm in width and girth and applying one coat of synthetic enamel paint, complete all as specified.

M & L one coat of synthetic enamel paint on steel & iron surface of any description, not other wise described, over 10 cm width or grith including preparation of old painted surfaces.

S & F 15 mm bore tubes medium grade galvanised with all fitting complete and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing (or) Removal to stone.

S & F 20 mm bore tubes medium grade galvanised with all fitting complete and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing (or) Removal to stone.complete all as specified and directed

S & F in repairs water closet (squatting pan) complete incl provision on lime concrete bedding 'Orissa pattern, size 580 x 440 mm white, integral foot rests including 10 ltrs capacity PVC flushing cistern and flush pipe, PVC connection of size 450mm, complete all as directed and as specified by Engineer-in-charge.

S & F 75 mm dia, PVC (SWR) floor trap, plain wth grating and jointing to waster pipe with solvent cement and fixed in PCC 1:2:4, type compete all as speciifed and as directed.

s & f 75 MM bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S & F in repair bib tap 15 mm bore, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass frerrule and fixed complete all as specified and as directed.

S & f in repairs 15mm bore stop valves fancy type, chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type).

S & F in repair 15mm stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union. complete all as specified and directed.

S & F 600 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S & F in repairs vitreous china wash basin flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Col' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specifire and as directed.

S & F 500 ltrs Rotational moulded polythylene water storage tanks, cylinderical vrtical with closed top hoisted and fixed in position all as specified in SSR part-I including 20mm dia PVC high pressure flat valve complete.

Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete/brick masonry etc and making good disturbed ground incl barbed wire complete all as specified and directed .

Dismantling fencing wire mesh, any type

Demolition of Brick work or stone / boulders masonry built in cement mortar

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed

M/S V PRATAP REDDY

PARDEEP AND CO

SAI RUPA CONSTRUCTIONS

M/S M.N.Reddy

BEEGEE DESIGN SYSTEMS