Loading
Loading…
Loading…
Tender Value
₹8.6 L
EMD Value
₹17,240
Closing Date
19 Sept 2026, 6:00 pm4d left
GE FARIDKOT
GE FARIDKOT MIL STN
MISC REPAIR TO GUARD ROOM AT GATE NO TCP 08 AT FARIDKOT MIL STN
2026_MES_786556_1
GE/FRD-57/2026-27
Open Tender
Civil Works
Item Rate
120 days
GE FARIDKOT
Class E a i
9 documents required · 9 mandatory
₹500
GE Faridkot
₹17,240
Yes
27 Aug 2026
27 Aug 2026
21 Sept 2026
27 Aug 2026
19 Sept 2026
10 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by engr-in-charge. | 70 | Sqm | - | - |
| 2 | M& L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed with tile adhesive with same make of tiles and pointed with epoxy grouting to match tiles over 10mm thick screed bed or bedding layer CM 1:4 for laying finishes complete all as specified & directed by Engr-In-Charge
NOTE:- (i) Adhesive measured and paid separately (ii) Epoxy grouting rate including respective item | 30 | Sqm | - | - |
| 3 | M&L Coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed with tile adhesive with same make of tiles and pointed with epoxy grouting to match tiles over 10mm thick screed bed or bedding layer CM 1:4 for laying finishes complete all as specified & directed by Engr-In-Charge
NOTE:- (i) Adhesive measured and paid separately (ii) Epoxy grouting rate including respective item | 40 | Sqm | - | - |
| 4 | Supply only tile adhesive paste/setting of tiles at required position(wall/floor) and to match the homogeneity of tile complete all as specified and directed by Engr-in-charge | - | Kg | - | - |
| 5 | Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed. | 3 | Each | - | - |
| 6 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as specified and directed | - | RM | - | - |
| 7 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed | - | Sqm | - | - |
| 8 | M& L Mild steel 150 MM pressed handles, oval type Complete all as specified and directed . | - | Each | - | - |
| 9 | S&F Aluminium anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed . | - | Each | - | - |
| 10 | S&F butt hinges 100 mm , light weight, cold rolled mild steel,Complete all as specified and directed | - | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.12 MB
TenderDocuments57.pdf
Tender Documents • 1.01 MB
BOQ_881440.xls
BOQ • 0.57 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .