ADDITION AND ALTERATION TO BUILDING NO. P-93, P-94 AND P-137 INCLUDING SPECIAL REPAIRS TO BUILDING NO. P-32 AT AIR FORCE STATION MOUNT ABU RAJASTHAN

Amount

Demolition of brick/stone/block/PCC block work masonry built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing the rubish off the premises complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling plain or corrugated steel sheets of any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Taking down of cement plaster or cement lime plaster of any description on PCC/stone surface/brick surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and removing from the site complete all as specified and directed.

Cleaning roof slabs/chajjas by sweeping with brooms, removing all depositions/mud/ vegetations etc complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified & as directed.

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified & as directed.

Excavating trenches in soft/loose, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed.

Excavating trenches in hard rocks, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/disintegrated rocks, each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material to distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point for soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm using excavated soil complete all as specified and directed.

Earth filling under floors in layers n exc 25 cm thick spreading & levelling including well ramming complete all as specified and directed.

M&L for hard core broken stone or builders of gauge not exceeding 63mm, deposited, spread and leveled in layer not exceeding 20 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for brick work built in cement mortar (1:6) using sub class 'B' old size bricks curved or straight in plan exc 6m mean radius complete all as specified and directed.

M&L for 35mm thick (measured solid) precast cement concrete solid blocks masonry cement concrete (1:2:4) type B-I using 10mm graded stone aggregate louvres and jallies, , including all mouldings but excluding frame (Pre cast frame shall be measured separately) and set in cement mortar (1:4) complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for cement concrete (1:3:3) type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete M-25 Grade using of 20 mm graded stone aggregate for Foundation,footing and mass concrete.complete all as specified and directed.

M&L for Reinforced cement concrete M-25 Grade using of 20 mm graded stone aggregate forColumns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete M-25 Grade using of 20 mm graded stone aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete M-25 Grade using of 20 mm graded stone aggregate as in in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Cement Concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in walls or retaining walls, any thickness, size or shape including pillasters, buttresses columns, pillars, boundry pillars and posts and mass concrete and thelike complete all as specified and directed.

M&L for 75mm thick cement concrete (1:4:8) type B-2 using 40mm graded stone aggregate as in floor sub base and sub course complete all as specified and directed.

M&L for 100 mm thick Cement Concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in flooring and finishing cement concrete surface even and smooth without usingextra cement complete all as specified and directed.

M&L for 25mm thick Cement Concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in levelling course/padding, finished even and fair on roof/ chajjas etc complete all as specified and directed.

M&L for Plain Cement Concrete (1:3:6) type C-1 using of 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not proivded for in Item 4028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

S&F formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter all as specified and directed by Engr-in-Charge

S&F formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified and directed.

S&F formwork to soffits of suspended slabs such as roof slabs, floor slabs,roof projection,chajjas, landings and similar work n. exc 200mm thick (horizontal/sloping) for flat rough finished surfaces of Kitchen platform shelf complete all as specified and directed.

S&F 10mm dia and over mild steel TMT bars as in reinforcement cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire annealed n.exc 0.9mm or with securing clips etc complete all as specified and directed.

S&F 6 to 8mm dia and over mild steel TMT bars as in reinforcement cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire annealed n.exc 0.9mm or with securing clips etc complete all as specified and directed.

S&F 5mm dia and over mild steel TMT bars as in reinforcement stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire annealed n.exc 0.9mm or with securing clips etc complete all as specified and directed.

S&F rolled mild steel work in tubular tresses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specified and directed.

S&F mild steel work such as flat iron, round bars fixed independently as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165complete all as specified and directed.

S&F rolled mild steel in joist channel angle, tee sections, MS pipe, MS square tube ,bars , MS plate fixed in purlin rafter cleat, support etc incl welding, riveting etc conforming to Fe-410-W Gde E-250 quality-A complete all as specified and directed.

S&F rolled mild structural steel in roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, clests etc conforming to Fe-410-W Gde E-250 quality-A complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410-W Gde E-250 quality-A complete all as specified and directed.

S&F in repair rolled mild structural steel as in joists, channel, angle, tee section, MS pipe, MS square tube ,bars ,mild steel plate fixed in purlin, rafter, cleat, support etc including welding, riveting etc conforming to Fe-410-W Gde E-250 quality-A complete all as specified and directed.

S&F mild steel bolts (Machine made) with hexagonal or square head at one end and screwed the other end with washeres and one hexagonal or square nuts length of bolt exc 10cm and n. exc 15 cm long and dia of shank 11 to 15mm complete all as specified and directed. complete all as specified and directed.

Supply only chain link MS galvanised fencing of any size or type as approved complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

S&F false ceiling with 12 mm thick glass fibre reinforced Gypsum ceiling tiles of size 595 X 595 mm ,prima fine fissured micro look white coloured using Aluminium powder coated “T” section 25 X16X1.5mm thickness grid and 6 mm dia GI suspension wire etc complete all as specified.

M&L for 10mm thick rendering cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering cement plaster in cement mortar (1:4) on surfaces of fair faces of brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 10 mm thick rendering cement plaster in cement mortar (1:4) on on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20mm thick screed of beding layer in cement plaster (1:4) complete complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 018 but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete to match in floor over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 06 but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete to match in floor over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M&L for 300 x 450x 7mmx7mm thick digital design glazed ceramic tiles as in vertical surfaces of walls such as dados,skirtings , risers and the like ; set, jointed in neat cement slurry and pointed in white or coloured cement on over and including 10 mm thick cement plaster in cement sand mortar (1:4) , t to match the same complete all as specified and directed.

M&L for 10mm thick Vetrified Ceramic tiles (square/rectangular) polished area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement slurry and pointed in white cement or coloured cement to match the shade of tiles, over and including 15 mm thick screed of beding layer in cement plaster (1:6) complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed of beding layer in cement plaster (1:6) complete complete all as specified and directed.

S&F solid PVC double door frame of size 50 x 95mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing.

S&F Factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specified and directed.

M&L for 60mm thick PVC moluded factory made reflective type heavy duty smooth finish cement concrete inter locking paver block of M-30 grade made by block making machine with strong vibrating compaction casted in rubber/Pu mould on a vibrating table of approved size and design/shape laid in reqd colour and pattern over and including 100 mm thick PCC in 1:2:4 and 50mm thick compacted bed of coarse sand filling the joints wiyh coarse sand etc including vibrating the surface with vibrating machine complete all as per the direction of Engineer -in Charge.

S&F 30 mm thick flush shutters, solid core construction with block board core and ply wood face panels commercial type on both side. Exposed edges of shutter to be provided with 6mm thick teak wood lipping. The thickness of lipping shall be 12mm for sides on which hinges are to be provided complete all as specified and directed.

S&F aluminium anodised frame for doors, windows,partitions powder coated (minimum thickness 50 microns) complete all as specifed and directed.

S&F Aluminium anodised powder coated window shutter or partition, fixed type without sash bar, alumn section section weighing 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed.

S&F Aluminium doors shutters air tight with natural anodized alunimium frame with on or more rebate partly glazed and partly panelled of with hollow profile PVC panelling of thickness 12mm (all aluminium member Top, bootom, vertical & middle of shutter made of size 82.55x44.45x1.80mm thick including necessary jointing cleats, glazing clips, 5mm thick tinted glass, rubber packing with anodized aluminium beading /glazing clip size 19.00x17.30x0.70mm, wt 0.097 Kg/RM of both side and fixing aluminium fittings i.e aluminium hinges 100mm three numbers, handles 200mm long two numbers, tower bolts 150mm two numbers and mortic lock with 06 lever fitting shoiuld be ISI marked complete in all respect complete all as specifed and directed. (Rates will also include making good floor /wall jambs of doors/ windows surface with plaster and match with existing finishes) Make of aluminium : Hindalco, Jindal, Indalco.

S&F 605mmx605mm grid size anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for false ceiling complete all as specified and directed.

S&F 12mm thick Gypsum Board in ceiling fixed with screw as per manufacturers instructionscomplete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed fixed with L-type or J-type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F in repairs fibre glass reinforced translucent plain sheet 2mm thick fixed with L- type or J- type or cranked hook bolts complete all as specified and directed.

S&F 5mm thick wood grain printed plain colour PVC sheet Solid PVC Wall Lining consisting of inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F tinted glass pane 5.5mm thick area of each pane exc 0.5 sqm fixed with beads and metal clips/pins complete all as specified and directed.

S&F 100mm stainless steel butt hinges medium weight all as specified and directed

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin , anodized and fixed , type C-21 complete all as specified and directed.

S&F 300mm long aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section fixed complete all as specified and directed

S&F 150mm size aluminium door handle cast type anodised complete all as specified and directed

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed.

Taking down of existing tarfelt/water proofing treatment on roof top and clean the existing surface with water and providing cement screed bed 20 mm thick in cement mortar (1:4) mixed with intregal water proofing compound @ 3% by weight of cement, on fair faces of concrete surfaces and applying cold bituminious oil based primer IS No 3383@250Gms/Sqm and laying APP modified membrane with non woven polyster reinforcement mat (Centre core) not less than 3 mm thick & not less than 3.50 Kg/Sqm, the over the lap otching shall be 100 mm length side and 100 mm width side all as per manufacture's instruction complete all as specified and directed.

M&L for preparing new surfaces of roofs and applying two coats of Dr. Fixit roof seal top coat (Classic) or equivalent and one coat of D.r Fixit roof seal top coat (diluted with water in ratio 2:1) as self-priming seal acrylic coating as per Manufacturer's instructions to stop leakage / seepage from roof (GI Sheets) / Wall, but before primer, all the bolts joints are to be filled with Dr. Fixit Feviseal HY 100 or equivalent and the leakage is to be sealed (unit qouted rate to be included in this item) complete all as specified and as directed at site. Note:- 1.Two coats of Dr. Fixit roof seal top coat (Classic) 2.0-2.2 Sqm/litre in each coat, without water dilution at rate of application being the same for both coats, This would ensure correct consumption of material to deliver a total 450-500 microns thickness and a coat of self priming @ 9-10 Sqm /litre. 2. Unit rates qouted by the bidders shall be deemed to be includedf or work in buildings /structure at any height.

M&L for preperation of new steel surfaces of any description, over 10cm in width or girth, not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for new surface of ceiling by scrapping and washing including preparation of surface by applying three coat of white washing all as specified and as directed.

M&L for preperation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty all as specified. (Note - work shall be got executed through skilled representative of manufacture company)

M&L for preperation of new plastered surfaces of walls and applying two coats of pastic emulsion exterior paint over one coat of alkali resistant primer complete all as specified & directerd.

M&L for complete removal of existing treatment from walls or similar surfaces of walls by washing , rubbing down and stopping of distempered and painted surfaces etc. and distempering walls with two coats of Exterior Emulsion Weathet Proof paint in camouflage pattern complete all as specified and directed. (Note:- Work shall be got executed through Authorised applicator of the Manufacturer of the Paint and Guarantee of 5 years shall be furnished by the contractor towards weather proof painting on Stamp paper)

M&L for preperation of old decorated and plastered and other surfaces of walls and priming plastered and other surfaces with 1mm thick wallcare putty and one coat of alkali resistant priming paint and distempering walls with two coats of Plastic Emulsion exterior paint (White or tinted) complete all as specified and directed.

M&L for preperation of old decorated and plastered and other surfaces of walls and applying 3mm thick readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and distempering walls with two coats of oil bound distemper (White or tinted) complete all as specified and directed.

M&L for preperation of new plastered and other surfaces of walls and and priming plastered and other surfaces with 1mm thick wallcare putty and one coat of alkali resistant priming paint and distempering walls with two coats of Plastic Emulsion exterior paint (White or tinted) complete all as specified and directed.

S&F in repair for sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 15 mm bore angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and directed of Make- Jaquar or Equvlent.

S&F in repair 15mm bore Chromium plated brass wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC valveless , suphonic action type 10 litres capacity flushing cistern , low level ,white , with inlet, ball valve , float and handle including bracket and connect to pipes etc. complete specified and directed and fixing arrangement, excluding 32 mm dia. PVC flushing pipe,complete all as specified.

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F Vitreous China wash basin (WHB), white, flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets and making good the damaged portion of wall or floor complete all as specified and directed.

S&F PVC connection 15mm bore 600 mm long with brass fly nut at both ends complete all as specified and directed.

S&F in repair 15mm bore pillar taps , cast copper alloy with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified.

S&F in repair 15 mm bore bib taps, chromium plated cast copper alloy, high pressure screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore concealed stop valve chromium plated, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified.

S&F 32mm bore Waste coupling suitable for discharge pipe of PTMT (half or full threated) for WHB minium weight 45 gms complete all as specified and directed.

S&F 100mm bore Cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggreate complete all as specified and directed.

S&F 15mm bore galvanised steel (GI) tubing (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls etc complete all as specified and directed.

S&F 20mm bore galvanised steel (GI) tubing (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls etc complete all as specified and directed.

S&F 20mm bore galvanised steel (GI) tubing (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches for external water supply complete all as specified and directed.

S&F 40mm bore galvanised steel (GI) tubing (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches for external water supply complete all as specified and directed.

S&F in repair grating doom 100 mm dia of PTMT (minimum weight 25gms ) complete all as specified and directed.

S&F 75mm dia PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed

M&L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 110 mm dia PVC (SWR) pipes including packing under haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F 110mm dia PVC (SWR) junction single, equal or unequal complete all as specified and directed

S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed

S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed.

M&L for bricks sub class 'B' old size laid dry abutting each other for cable protection size 230 mmx 115 mm x 75 mm complete all as specified and directed.

M&Lfor providing dry river washed sand in trenches as sand cushioning to under ground cables including punning down of sand in layer complete all as specified and directed. (Note :- 18mm punned thickness shall only be measured and paid).

S&F 20mm bore brass chromium plated (fancy type) angle cock/valve , with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed.

S&F 40mm bore gun metal globe or gate valve with iron wheel screwed both ends for iron pipe complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. to match with existing surfaces complete all as specified and directed.

Dismantling existing Split type Air Conditioner of capacity 1.5/2 Tonnes and refixing in same position complete all as specified and directed.

M&L for concealed point wiring for one light point /fan point/bell point controlled by one switch one way with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH (Phase and Neutral) in concealed PVC conduit and fitting including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable FRLSH (Earth) connected to common earth dolly complete all as specified and directed.

M&L for concealed point wiring for one socket out let 5 Amps 5 Pin on same board with other switch controlled by one switch one way with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH (Phase and Neutral) in concealed PVC conduit and fitting including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable FRLSH (Earth) connected to common earth dolly complete all as specified and directed.

M&L for concealed point wiring for one socket out let 5 Amps 5 Pin on the independent board controlled by one switch one way with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH (Phase and Neutral) in concealed PVC conduit and fitting including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable FRLSH (Earth) connected to common earth dolly complete all as specified and directed.

M&L for concealed point wiring for one socket out let 15 Amps 5 Pin on independent board controlled by one switch one way with 4 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH (Phase and Neutral) in concealed PVC conduit and fitting including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 4 Sqmm multi stranded copper conductor cable FRLSH (Earth) connected to common earth dolly complete all as specified and directed.

M&L for Sub main wiring concealed with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLSH cable 1100 Volts grade including 4 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSH as continuous earth wire drawn through concealed conduit Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wireof size 6 Sqmm including conduit /PVC casing/caping shall be measured as one length.

S&F ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed.

S&F Modular switch 6 Amp, 250 V, AC, one way one module complete all as specified and directed.

S&F Modular Switch Socket Combined, 6A - 5 pin combined 2 modules complete all as specified and directed.

S&F Modular Switch Socket 16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular Switch one way 01 module complete all as specified and directed.

S&F Modular Fan regulator, stepped type, 2 module , 120 W ,230V AC.

S&F sheet metal enclosures double door, single pole and neutral (SPN) , 12 ways DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete all as specified and directed. Note : Rates are deemed to be included for flashing in wall concealed complete making good and matching existing surface.

S&F sheet metal enclosures double door, Triple pole and neutral (TPN) , 4 ways DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete all as specified and directed. Note : Rates are deemed to be included for flashing in wall concealed complete making good and matching existing surface.

S&F miniature circuit breaker (MCB) single pole, 6 - 32 Amps 240V in `C’ series having current rating 10 KA complete all as specified and directed.

S&F miniature circuit breaker (MCB) SPN, 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F miniature circuit breaker (MCB) SPN, 40 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F miniature circuit breaker (MCB) TPN and current carrying capacity 63 Amps 415V 10KA 'B' curve in the DB complete all as specified and directed.

S&F Aesthetically designed LED panel and 34 Watts, of size 2x2 feet LED light fittings with LED lightsfor surface mounting which provides soft light and glare free symmetrical illumination including twin core flexible copper conductor PVC cable connection of lights and connector whereever required. Make: Havells Model No PLANO2x2PLR34WLED865S or equivalent of same in makes specified in the Appemdix "B" of Particular Specifications here-in-after, as approved by the AGE(I).

S&F New generation energy saving and environmental friendly long life LED of 60W street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 makes specified in the Appemdix "B" of Particular Specifications here-in-after, as approved by the AGE(I). .

S&F ceiling fans, 1200mm sweep, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor and making connection from ceiling rose or connector to fan complete all as specified. NOTE:The length of suspension rod shall be as per site requirement.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and connecting up including provision of flexible PVC conduit from ceiling rose or connector to fan complete all as specified.

Supply, lay joint and test LT XLPE under ground insulated, screwed, PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of size 16 Sqmm 4 core confirming to IS laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and directed.

Construction of Valve Pit of size 900x900x900mm (internal dimensions) , excavation and earth work in any type of soil and strata, moorum filling, 100mm thick lean concrete PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate for foundation, and 460mm thick brick masonry wall built in cement mortar (1:4) using sub class "B" old size well burnt bricks , 15mm thick internal and external plaster in cement mortar (1:4) upto15cm below ground level mixted with water proofing compound, 3.15mm thick MS sheet cover with angle iron frame of size 40x40x6mm to be fitted in and around 50x50x6mm mild steel angle iron frame with 50X6mm flat iron hold fasts embedded in PCC Coping (1:2:4) type B-1 of 150mm depth and width equal to thickness of wall including locking arrangement with necessary fixing materials like hinges, nuts and bolts etc (valve chamber cover shall be opened in two halves) and painting to MS cover with one coat of red oxide primer and two coats of synthetic enamel paint and two coats of cement base paint over a coat of primer etc all as specified and all as shown on drawings.

Haritwal traders