SPL REPAIR TO BLDG NO C1 RA (OTM ACCN) AND 02 X OR MD ACCN (P-39) AND (P-44) BLOCK UNDER GE JHANSI

Demolition of cement concrete incl terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar including removing of rubbish from site, complete all as specified and as directed.

M&L for 75 mm thick cement concrete type D2 1:4:8 (using 40 mm graded stone agg) as in sub base of flooring/ hard standing complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B1 (20mm stone aggregate) as in flooring to achive / receiving tiles, complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. (Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish material off the premises, complete all as specified and as directed.

M&L for Non-skid colour ceramic tile tiles joint free 8 to 10 mm thick (square/rectangular) area of each tile not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:6 over brushing neat cement slurry @ 3Kg/sqm etc complete all as specified and as directed.

All as per item here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering (backing coat) in CM 1:4, complete all as specified and as directed.

M&L for Non skid ceramic colored tiles, 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.

M&L for ceramic colour tiles in vertical surface of size 350x250x7 / 450x300x7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness laid , bedded and pointed in any mortar as in floors, aprons and removing rubbish from site complete all as specified and as directed.