Construction of new 33 kV line for 33/11 kV S/S Naubasta and Pashupati Nagar under EUDD Naubasta, KESCo., Kanpur for provision of Double Supply from 220/11 kV GIS S/S Kidwai Nagar.

Taking out of 33/11 kV XLPE 3x300 Sq.mm cable from drum/complete drum of cable at site of work or store using JCB including carriage

Digging of Trench for laying of cable in different situations in size of 30 cm. wide and 1 to 1.5 meter deep.

In Normal soil

In Kharanja Soil

In Metallic Road

Laying of 33 KV XLPE cable in above digged trench covering with bricks and back filling and proper ramming.

Laying of MS Pipe in digged trench

Laying of Cable in MS Pipe

Laying of Cable by HDD method

Making 33/11 kV straight through joint including digging of pit upto 1.1 metre depth and making a proper chamber for straight through joints using bricks, cement, etc.

Making outdoor joints of 11/33 KV XLPE Cable where the cable is being laid.

Mounting of cable box on double pole/cable support structure without Pipe

Mounting of cable box on double pole/cable support structure With Pipe

Loading, Carriage and unloading of ST poles including old pole from store to work site or vice versa

Loading,Carriage and unloading of ACSR Dog Conductor from Store to Work Site or Vice-Versa.

Laying of ACSR Dog Conductor

Laying of G.I. Wire including lacing

Fabrication/modification of MS Item as per requirement of site

Erection of Single S.T. Pole as per standard specification

Erection of double pole structure including excavation of pit as per standard specification

Grouting of pole with cement brick ballast and coarse sand as per standard specification.

Making plinth of single pole of 400 mm dia, 600 mm height (200mm underground) with C.C. in ratio 1:4:8 of cements, stone ballast and coarse sand including cost of materials.

Painting of S.T. pole with one coat of red oxide and two coats of Alm. Paint including cost of Ist Class enamel paint.

Earthing of supports as per standard specifications.

Chopping of tree branches lying in the route of existing line touching the tree branches to the phase line conductor making fault to the feeder, for 3” to 18” dia or as per requirement of site.

Opening of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work.

Making of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work.

L/C for mounting of Pin Insulator

Loading, Carriage and unloading of 33 kV VCB/OCB (including old & used) from store to work site or vice versa

Shifting of 33 kV VCB from unloading point to switchyard

Loading, Carriage and unloading of 33 kV CRP (including old & used) from store to work site or vice versa

Shifting of 33 kV CRP from unloading point to control room

Erection of 33 kV VCB structure

Erection of Four Pole Structure

Fabrication of following structure with M.S. Channel, M.S. Angle, M.S. Flat etc. in required size and length including cutting, drilling holes, welding and assembling as per drawing.

Post Insulator/L.A./C.T/P.T Structure.

Cable Support Structure.

Isolator Structure.

Erection and grouting of following structures with 1:4:8 CC 25 mm brick ballast in required size in proper alignment and making plinth of all structure in 1:2:4 CC mix with 20 mm stone grit, 15 Cm ground level to smooth finish and its proper curing including cost of cement.

Isolator Structure.

Post Insulator/L.A./C.T/P.T Structure.

Cable Support Structure.

Erection of following equipment on erected structure in proper alignment.

33 KV Isolator

33 KV C.T/P.T

Painting of following structure/equipment after rubbing and cleaning with Emery paper, coating with one coat of Red Oxide and two coat of grey enamel ISI marked paint with smooth finish including cost of paint and labour.

Post Insulator/L.A./C.T/P.T Structure.

Isolator Structure.

Cable Support Structure.

Erection of new lower Busbar with ACSR Dog/Panther Conductor including mounting of disc insulator string.

Making of 33KV V.C.B. plinth in size of 1.5x2.4x1.0 meter with brick work cement, sand ratio 1:6 making proper pockets for anchor bolts grouting its plastering around with smooth finish including cost of civil material.

Erection of 33 kV VCB in 33/11 kV Switchyard on erected structure

Erection of 33 kV CRP in Control Room

Loading, Carriage and Unloading of CT/PT junction box from store to site and vice versa

Erection of CT/PT Junction Box

Loading, Carriage and Unloading of 33 kV C.T.

Erection of 33/11 kV V cross arm

Excavation of pole

Shifting of single circuit Overhead line on newly erected poles including dismantling and re-erection of cross arm and top channel

Fixing of stay rod and its erection and grouting by fitting of stay clamp. Stay wire and its proper binding and tightening etc.

Fixing of danger board on erected poles

Wiring, Testing and commisioning of newly erected 33 kV VCB and all related work.

Construction of Control Cable Trench( 30 cm width and 30 cm depth ) with brick and cement and other as per standard specifications along with RCC trench cover designed as per site requirement

Laying of Control Cable in trench

Making of H.T. Section Point

Making riser from existing earth mate of control room for making earthing support to newly erected 33 KV VCB/CRP in control room/switchyard

Carriage of all concerning stock material except mentioned above from Kesco. Store to site or vice-versa.

Connecting of newly erected network with Kesco mains including testing, commissioning and energization of the same completely.

Goodluck Electricals

Dixit Construction Company