PROVN OF PARKING SHED FOR CALIBRATION VAN SPECIALIST VEHICLE AT AF STATION BORJHAR UNDER GE AF BORJHAR

Amount

SCHEDULE 'A' PART-I (B/R PORTION)

SCHEDULE "A" PART I Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5m in depth for foundation etc or for shafts, wells, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in hard/dense soil.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 Cm.

Removing excavated material n exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point.

M&L for PCC (1:3:6) type B-1 (using 20mm graded stone aggregates) as in foundations, fillings and mass concrete complete all as specified and as directed.

M&L for Steel work in tubular trusses and posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240,complete all as specified and as directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment,complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 6-8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) as in foundations including rafts, foundation beams, plinth beams, bases vfor columns, etc, and mass concrete complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, sides and soffits of foundation and plinth beams, and similar works, verticle or to batter complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corructed steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n exc. 63mm, deposited, spred and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 100mm thick plain cement concrete (1:4:8) type D2 using 40mm graded aggregates as in sub base of floor, complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:3:6) type C2 using 40mm graded aggregates as in plinth protection, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) mixed with integral water proofing compound as per manufactures instructions on fair faces of brick walls or concrete surface complete all as specified and directed. Note: WPC shall be measured and seperately

M&L for 15mm thick rendering on fair faces of brick work with CM (1:6) finished even & smooth without using extra cement complete all as specified and as directed.

Supply only Water proofing compound(WPC)

M&L for applying two coats of white wash to new plastered surfaces of walls including preparation of surfaces complete all as specified ad directed.

M&L for applying two coats of camouflage acrylic paint to new plastered surfaces of walls, over a coat of cement primer including preparation of surface complete all as specified ad directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel and iron surfaces, exceeding 10cm in width or girth including preparation of surfaces complete all as specified and directed.

SCHEDULE "A" PART II Materials and labour for point wiring with 2.5 sq.mm. FRLS PVC insulated and unsheathed multistranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit with clamps not less than 20 mm dia and 1.2 mm thick complete with all fittings and accessories, fixed to walls/ceiling, including factory made sunk type mild steel terminal boxes 1.25 mm thick (wall thickness) conforming to IS-5133 (Part-I) with 3mm thick hylem sheet top cover for mounting switches/ sockets/regulator etc including 2.5 sq.mm FRLS PVC insulated, unsheathed multistranded copper conductor cable 1100 Volts grade, single core, green in colour for earth continuity conductor connected to common earth dolly for one 3/5 pin, 16 Amp switch socket combination on independent board , complete all as specified and directed.

Materials and labour for point wiring with 1.5 sq.mm. FRLS PVC insulated and unsheathed multistranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit with clamps not less than 20 mm dia and 1.2 mm thick complete with all fittings and accessories, fixed to walls/ceiling, including factory made sunk type mild steel terminal boxes 1.25 mm thick (wall thickness) conforming to IS-5133 (Part-I) with 3mm thick hylem sheet top cover for mounting switches/ sockets/regulator etc including 1.5 sq.mm FRLS PVC insulated, unsheathed multistranded copper conductor cable 1100 Volts grade, single core, green in colour for earth continuity conductor connected to common earth dolly for One light point/ One fan point/bell point controlled by one switch complete all as specified and directed.

Supply and fix 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, twin core flat or circular 6 Sqmm cable served with inner sheathing of PVC tape and overall PVC sheathed as in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire, complete all as specified and directed.

M&L for GI pipe light grade, 25 mm dia including necessary fittings fixing clamp to wall all as specified and directed.

S&F LED batten tube light fittings , 24 W, in extruded aluminium housing with diffuser with all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed. Make: Crompton Cat No. LCCLB24-24CDL or equivalent model of make Phillips/Wipro/Jaquar/Surya.

S&F MCB DB , SPN 4 way, double door with 200 Amp rated bus bar, horizontal type including earth and neutral link ,complete with fixing accessories all as specified and directed. Make: Legrand/ Schneider/Siemens.

S&F MCB SP 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-40 Amps complete all as directed.

S&F MCB SPN, 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-40 Amps complete all as directed.

S & F switch socket combination 2 in1, 3 pin 5 and 15 Amp flush type complete all as specified and directed.

S&F switch piano flush type single pole one way 5 amps, 230 V complete all as specified and directed.

Ms Sukumar Talukdar and Co.

M/S Kiran Chandra Das

M/S PRASANTA MAHANTA

m/s dip contruction

M/S. SUBHAS CONSTRUCTION CO.

RIPAN BARUAH

M.S. Construction

Ms N D Enterpise

M/S Vimal Enterprise