Providing Main Service Cable Arial Bunched From Main Panel to MFP on the RCC poles at BOP Abdullian and Jitender of 07 BN BSF under SHQ BSF Jammu

Amount

Supplying and Erection of 9 mrt RCC pole (minimum size required: bottom width : 335 mm, top width: 115 mm, thickness:105 mm) in brick ballast and ramming the foundation, finishing with 150 mm thick cement concrete (1:3:6) layer on the top with including excavation and refilling etc as required.( depth should 1/6th length of pole)

Supplying and erection of bow stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and also with 0.6 m long brace of size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulley fixed at one end of the brace as required

Supplying and errection of 3C x 95 sqmm + 70 sqmm ( insulated ) Aerial Bunched Cable: 1.1 KV grade Stranded & Compacted Aluminium Phase Conductor, and Stranded Messenger Conductor with All Aluminium Alloy, Phase Conductor is insulated with XLPE (Sioplas) Compound, Messenger is insulated. confirming to IS:14255-1995 up to the latest amendment. on the existing 9 mtr RCC pole etc. as required (cable specification as per general specification for electrical work, part-II, external para 5.7 (A) srlno 13.

Supplying & fixing of hot dipped galvanized iron Hook - Flat Eye (HOOK ROD DIA- 16 mm, EYE HOOK DIA- 38 mm, FLAT WIDTH- 35 mm, FLAT THICKNESS- 06 mm & length 250 mm) and 9 mtr RCC pole mounting clamp not less than 115 mm , made out of 06 mm thick and 35 mm wide and 400 mm long flat hot dipped galvanized iron flat strip including suitable, bolts, nuts and washer etc as required

Supplying & fixing of Suspension Clamp - Self Supporting Type, suitable to hold 3 × 95 mm2 + 1 × 70 mm2 AB Cable made from high strength Galvanized Steel including suitable, bolts, nuts and washer etc as required

Supplying & fixing of Dead End Clamp - Self Supporting Type, suitable to hold 3 × 95 mm2 + 1 × 70 mm2 AB Cable made from high strength Galvanized Steel including suitable, bolts, nuts and washer etc as required

Supplying & fixing of Anchoring Clamp, suitable to hold 3 × 95 mm2 + 1 × 70 mm2 AB Cable made from high strength Galvanized Steel including suitable, bolts, nuts and washer etc as required

Supplying & fixing of pre insulated bi metallic lugs for end termination of AB cable having size of 3 × 95 mm2 + 1 × 70 mm2 AB Cable made from etc as required

Supplying, installation, testing and commissioning of outdoor hut type feeder pillar suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 3 mm thick CRCA sheet, double door type with inbuilt locking arrangement, 3 mm passivated gland plate, depth not less than 300 mm and all connection (incoming and outcoming) will be taken out in cable alley. The panel shall be cleaning, processing and finishing with 7 tank process for powder coating in approved shade and supplied with suitable pedestal of 50mm x 50 mm x 6 mm angle iron frame with 4 Nos 800 mm long legs, 200 Amp 4 nos high conductivity aluminium bus bar with DMC/SMC support, earth bus as the same size as the phase bus running across the length of the panel, solid connection from main bus bar to switchgear, control wiring with 1.5 sqmm FRLSH insulated multi stranded copper conductor with cable alley, including providing and fixing following switchgear, fixing LED phase indicator and following accessories etc complete as required. The panel shall be mounted on suitable cement concrete foundation 30 cm below the ground level and 50 cm above the ground level. The panel should not less than 1025 mm x 1250 mm x 450 mm as CPRI approved. Note:- (i) Panel size indicated is nominal. The actual size shall be as per the drawing approved by the Department. Incomer i) MMCCB 04 Pole 125Amp Havells/C&S/L&T/HPL Fixed type 25-30 Ka breaking cap. 02 nos with spreader terminals ii) MFM 4410 LED Meter CL 1.0 WC441010OOOO 9425 - 1 No. (Make :- L&T) iii) Residual Current Circuit Breaker (Model No - BG204030, 4 Pole, 40 Amp and Sensitivity 300 mA, Make L&T) - 2 No iv) LED Phase Indicating Lamps - 1 Set of 03 Nos. Outgoings i) MCCB 04 Pole 100 Amp Havells/C&S/L&T/HPL Fixed type 26-30 Ka breaking cap. 01 nos ii)MCCB 04 Pole 40 Amp Havells/C&S/L&T/HPL Fixed type 16-20 Ka breaking cap. = 02 nos with spreader terminals

Supplying, installation, testing and commissioning of outdoor hut type feeder pillar suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 3 mm thick CRCA sheet, double door type with inbuilt locking arrangement, 3 mm passivated gland plate, depth not less than 300 mm and all connection (incoming and outcoming) will be taken out in cable alley. The panel shall be cleaning, processing and finishing with 7 tank process for powder coating in approved shade and supplied with suitable pedestal of 50mm x 50 mm x 6 mm angle iron frame with 4 Nos 800 mm long legs, 200 Amp 4 nos high conductivity aluminium bus bar with DMC/SMC support, earth bus as the same size as the phase bus running across the length of the panel, solid connection from main bus bar to switchgear, control wiring with 1.5 sqmm FRLSH insulated multi stranded copper conductor with cable alley, including providing and fixing following switchgear, fixing LED phase indicator and following accessories etc complete as required. The panel shall be mounted on suitable cement concrete foundation 30 cm below the ground level and 50 cm above the ground level. The panel should not less than 1025 mm x 1250 mm x 450 mm as CPRI approved. Note:- (i) Panel size indicated is nominal. The actual size shall be as per the drawing approved by the Department. Incomer i) MCCB 04 Pole 160 Amp Havells/C&S/L&T/HPL Fixed type 35 Ka breaking cap. 02nos with spreader terminals ii)On load Changeover Switch 04 Pole 160 Amp Havells/C&S/L&T/HPL - 01 nos ii) MFM 4410 LED Meter CL 1.0 WC441010OOOO 9425 - 1 No. (Make :- L&T) iii) LED Phase Indicating Lamps - 1 Set of 03 Nos. Outgoings i) MCCB 04 Pole 125 Amp Havells/C&S/L&T/HPL Fixed type 26-30 Ka breaking cap. 02 nos ii)MCCB 04 Pole 63 Amp Havells/C&S/L&T/HPL Fixed type 16-20 Ka breaking cap. = 01 nos with spreader terminals

Earthing with GI earth 50 mm X 2000 mm including accessories with ground enrichment compound (AIO4SiOHO), crystalline conductive mixture conforming IS 3043:1987 as required

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)

Providing and fixing 50 mm dia HDPE pipe (PE 100 as per IS 4984: 2016) 3 Meter (Approx.) from ground level for cable protection along with RCC Pole 9 meter high (having bottom dia 165 mm) i/c bends, socket etc. and 1 No. MS clamp of 25 mm x 5 mm GI strip to hold the 2 Nos of HDPE pipe with suitable nut bolt etc as required.

Providing, laying and fixing 100 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required.

Laying of one number PVC insulated and PVC sheathed Power cable of 1.1 KV grade of Above 35 Sqmm and upto 95 Sqmm size direct in ground including excavation and refilling the trench etc as required but excluding sand cushioning and protective covering

Laying of one number PVC insulated and PVC sheathed Power cable of 1.1 KV grade of Above 35 Sqmm and upto 95 Sqmm size in existing RCC/HUME/METAL pipe as required

M/S AMAR PAL SINGH

SONU TRADERS