Supply and fixing of New LED lights in Ward No.50, Ranganathapuram 4th cross street to Gandhi road junction (Storm Water Drain Platform Pathway) Zone - 4 at Tambaram City Municipal Corporation

Amount

Supply and delivery of 120W LED Street light fitting with minimum 300mm length of 3 core 1.0 Sqmm copper cable and IP 66 male connector complete as per technical specification mentioned in the tender document section (6) .

Supply and Erection of 4KVA Single phase Street Light Controller Made up of metal enclosure to be IP 55 and GPRS/GSM based remote streetlight monitoring system with capacity for self-protection from short-circuit, over voltage and anti-theft alert suitable for intergrated with Existing CCMC as directed by departmental officers.

Supply and fixing of single phase service connection EB Meter box of size 12"x10"x6" with single compartment made up of 16SWG powder coated vermin proof metal sheet with clamps suitable for EB RCC pole suitable for single phase EB service connection. The meter box fixed with 12mm wooden board fixed with one number of 63 Amps porceline fuse unit Inter connection with 7/20Amps PVC insulated copper wire with one number of neutral link. The meter box should be provided with glass in front side. fixing of The meter box should be made PWD earthing. The rate includes dismanling of existing meter box and fixing new meter box, EB energy meter and accessories and termination of wires.

Pole Foundation Making PCC for leveling coarse of size 700mmx700mmx200mm, PCC for leveling coarse 1:4:8 and Making RCC foundation of grade M20 (1 cement : 1.5 sand : 3 stone/brick aggregate) 500mmx500mmx 1200 using steel reinforcement of grade RTS with 50mm clear cover to reinforcement and rings using 8mm dia steel reinforcement @ 190 C/C,using shuttering, along with supply & installation of 2 nos. of 40mm dia HDPE pipe for cable entry and cable exit. 4 no. 'J' type foundation bolts M20 of 650mm Length shall be anchored in the foundation. It includes water curing as required and soil excavation & backfilling. It also includes supply of all material and labour including erection of foundation at Site.

Supply and Laying of 2x16Sq.mm sq.mm PVC armoured LTUG Cable and 40 mm HDPE pipe in a trench to be excavated at a depth of 0.75 Metre putting 0.10 Metre.Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.( 11x27mtr = 189 mtr )

Supply, delivery and installation of 3 Core 1.0 Sq.mm copper cable with length of 9 meters and Female connector in the other end suitable to connect with Male connector in the LED fittings as per Standard technical specification ( New lights ) (Single ARM=3+ Double ARM=4 = 11 lights)

Supply and clamping of. U.G. cable: Supply and laying of 4 x 16sq.mm PVC armoured (Aluminium) LT UG cable on wall or post with necessary clamping with necessary arrangements etc complete. (1 timer * 27 mtr = 27 mtr)

Supply and fixing of brass Cable glands: Supply and fixing of Brass Cable glands suitable for 4 core x 16 sqmm L.T.U.G. cable. as per standard specification( 1 SLC * 3 = 3 Nos)

Supply and delivery of RF based ILM device with Dimming including all cost of material and labour charges etc complete as per direct to departmental officers (120W)

Supply and Erection of 8 M Height Octagonal street light pole with Single Straight bracket: Supply, Erection of 8m FreeStanding SingleArm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300x300x12mm as per IS-875with following specification.Bottom Pole Dia - 130mmTop Pole Dia - 70 mmThickness of Pole - 3 mm The poles hould be hot dipgalvanized confirming to BESNISO-1461 with thickness of 65 Micron etc complete as per standard specification.

Supply and Erection of 8 M Height Octagonal street light pole with Double arm Straight bracket: Supply, Erection of 8m FreeStanding DoubleArm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300x300x12mm as perIS-875with following specification.Bottom Pole Dia - 130mmTop Pole Dia - 70 mmThickness of Pole - 3 mm The pole should be hot dipgalvanized confirming to BESNISO-1461 with thickness of 65 Micron etc complete as per standard specification.

M/S.RIYA ENTERPRISES (BID ID -1130369)