COMPREHENSIVE MAINT TO BLDGS OF GROUP VIII UNITS LOC AT RMS

Amount

M&L 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers without using extra cement using water proofing compound @ 3% by wt of cement for finished even and smooth including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including S&F GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed.

M&L for rendering 12 mm thick in CM (1:6) on other side of lathing finished even and smooth without using extra cement complete all as specified and as directed.

M&L brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick work complete all as specified and as directed.

M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exceeding 6 m mean radius, built in Cement Mortar (1:6) including demolition of old brick work complete all as specified and as directed.

M&L for second class hardwood as in scantlings clean sawn timber fixed including dismantling old timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and as directed.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) complete all as specified and as directed..

Taking down door chowkats with shutter exc 1.5 but not exc 4 sqm each (without taking off shutters from the frame) etc complete all as specified and directed.

S&F factory made Pressed steel frames(1.25 mm thick MS sheet) of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,including one shop coat of primer etc complete all as specified and directed.

S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and as directed.

S&F for second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats complete all as specified and as directed.

S&F Powder Coating aluminium colour frame for doors, windows, ventilators and partition etc with one or more rebates including joining cleat for fixing complete all as specified and as directed.

S&F Powder Coating aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws complete all as specified and as directed.

S&F for Powder Coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and as directed.

S&F sheet glass 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

S & F 100 size stainless steel butt hinges complete all as specified and as directed.

Supply & Fixing 150 mm Aluminium handles, cast type, anodised complete all as specified and as directed.

S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed.

M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of primer on new plastered surfaces of walls including preparation of surface complete all as specified and as directed.

M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer on new surfaces in any tint complete all as specified and as directed.

M&L for Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of old surfaces of walls applying one coat of cement base paint complete all as specified and as directed.

M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oil bound distemper on walls.all as specified and directed

Demolition of Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.

M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate) as in plinth protection laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 9-10mm thick (Square / rectangular) of area exc 0.18 sqm but not exc 0.36 Sqm each, in floors laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including demolition of old Stone slabs/tiles complete all as specified and as directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square / rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick CM (1:6) screed bed including demolition of old Stone slabs/tiles complete all as specified and as directed.

All as per Ser item No 29.00 (here-in-beofre) but as in skirting, laid over & including 10mm thick baking coat in CM (1:4).

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick laid over and including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles all as directed.set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including demolition of old Stone slabs/tiles complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) including demolition of old Stone slabs/tiles complete all as specified and as directed.

All as per Ser item No 32.00 (here-in-beofre) but as in skirting, laid over & including 10mm thick bedding layer in CM (1:4).

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification complete all as specified and as directed.

M&L for cement concrete type C-2 (1:2:4) (using 40 mm graded stone agg) as in surface channels and drains complete all as specified and as directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds complete all as specified and as directed.

Demolition of cement concrete in reinforced of any description and in any position not otherwise specifically provided, complete all as specified & directed.

Demolition, Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Cement concrete type (B-1), (1:2:4), as in levelling course (using 20 mm graded stone aggregate), 40 mm thick complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 75 mm thick (using 40mm graded stone agg) as in sub base of floor complete all as specified and as directed.

M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.

M&L TMT bars, 6 to 8mm, cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for precast cement concrete type B-1 (1:2:4) (Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok complete all as specified and as directed.

S&F in repairs tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and as directed.

S&F in repairs tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore complete all as specified and as directed.

S&F in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed.

S&F in repair for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor ccomplete all as specified and as directed.

S&F in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe incl Urinal spreader complete all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual fluash type complete all as specified (Make Cera, F1020106) complete all as specified and as directed.

S&F in repairs for 15mm dia of pipe CP bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed .

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and as directed.

Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and as directed.

S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified and as directed.

S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and as directed.

S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and as directed.

S&F of 110mm dia PVC (SWR) bends complete all as specified and as directed.

S&F 75mm PVC(SWR) bends any radius with acess door complete all as specified and as directed.

S&F of 75mm dia PVC (SWR) Vent cowl complete all as specified and as directed.

S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and as directed.

S&F in repairs rotational moulded polyethylene 500 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed.

S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping including dismantling of old unsv ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement including taking down cement plaster complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including taking down cement plaster complete all as specified and as directed.

Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of old unsv sheet of any pattern or description complete all as specified and as directed.

S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of old unsv sheet of any pattern or description complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all specified and as directed

S&F Rolled sections as in roof truss, purlins including cleats GDE Fe 410-0-or Fe 310-0 including dismantling of wrought iron or mild steel work of any description complete all as specified and as directed.

M & L for PCC 25mm thick type B-0, (1:2:4) (using 12.5 mm graded stone aggregate) as in levelling course of floor complete all as specified and directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all specified and as directed

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including dismantling of old unsv wall panelling (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as 'specified and as directed.

S&F in repairs 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers complete all specified and as directed

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all specified and as directed

S&F 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all specified and as directed

S&F in repairs One Piece Closets vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all specified and as directed

S&F in repairs WHB Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore dia of pipe complete all specified and as directed

S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all specified and as directed

M&L for Point wiring in repairs complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators suitable size as required at site and 50 mm deep complete all as specified and as directed.

One light controlled by one, one way switch.

One Ceiling fan/ Exhaust fan point controlled by one, one way switch.

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 3 pin socket outlet 5 Amps on the Independent board

One bell point controlled by one, one way switch .

All as per item No- 86.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.

S&F Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed.

S&F Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and as directed.

S&F Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and as directed.

S&F Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and as directed.

S&F stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and as directed.

S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and as directed.

S&F in replacement of Bell AC 230 volts musical type complete all as specified and as directed.

S&F bell push switch 5 amps piano type flush type complete all as specified and as directed.

S&F in repairs 20W LED, 4', Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting up with flexible copper cable from ceiling rose to the light fitting complete all as specified and as directed.

All as per item No 97.00 here in before but LED tube light fitting 09 Watt LED, 2' complete all as specified and as directed.

S&F in repairs Lamp holder , PVC/ Polycarbonate type with PVC round/square block for lamp holder complete all as specified and as directed.

S&F LED lamp 9 Watt suitable for lamp holder fittings incl taking down old unsv led lamp complete all as specified and as directed.

Supply , Fixing and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technology for inner tank with incoloy heating element with minimum 4 years warranty , ABS outer body , 2 units of PVC connection pipe with length of 450mm length for hot and cold water supply with complete Accessories complete all as specified and as directed. Note : Old geyser shall be deposited to MES AGE(E/M) Store

S&F in repairs for piano switch single pole 5A, one way complete all as specified and directed.

S&F in repairs for switch socket combination 2 in 1, 3 pin 5 A Flush complete all as specified and as directed.

S&F in repairs for switch socket combination 2 in 1, 3 pin 5 A/16A Flush complete all as specified and as directed.

S&F in repairs for socket outlet 5 pin 6A, 230 volt flush type complete all as specified and as directed .

S&F in repairs for fan regulator 100/120 wall step type AC 220 volt complete all as specified and directed.

S&F in repairs for PVC switch board 10"x12" suitable for switch socket complete all as specified and directed.

S&F in repairs for PVC switch board 8"x10" suitable for switch socket complete all as specified and directed.

S&F in repairs for PVC switch board 8"x6" suitable for switch socket complete all as specified and directed.

S&F in repairs for PVC switch board 7"x4" suitable for switch socket complete all as specified and directed.

S&F in repairs for PVC switch board 4"x4" suitable for switch socket complete all as specified and directed.

S&F in replacement of PVC cassing & caping 25 mm complete all specified and as directed.

S&F in replacement of PVC cassing & caping 32 mm complete all specified and as directed.

M&L for replacement of PVC conduit 20mm complete all specified and as directed.

M&L for replacement of PVC conduit 25mm complete all specified and as directed.

Supply and fixing for engagement LED 0.5w light red, green, complete all as specified and as directed.

M&L for sub main wiring Casing caping two run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including casing caping complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length including taking down all as specified and directed

M&L for sub main wiring Casing caping two run 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including casing caping complete all as specified and as directed. NOTE:- Two runs of 6.0 Sq mm +one run of 6.0 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length.including taking down all as specified and directed.

S&F MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.

S&F MCB TPN 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

S&F in repairs MCB Distribution board double door type SPN 8 Way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed .

S&F MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning including taking down old unsv MCB complete all as specified and as directed.

S&F MCB SPN 40 to 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series including taking down old unsv MCB complete all as specified and as directed.

S&F MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size incl taking down old unsv complete all as specified and as directed.

Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting incl taking down old unsv complete all as specified and directed by Engr-in-Charge.

M & L for earthing complete with galvanized steel earth plate 60cm x 60cm x 6mm thick electrode, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI strip 25 x 4mm size up to test point by means of nuts, bolts, check nuts and washers of GI including excavation and earth work, PCC (1:3:6) type C-1 pit, 20mm bore dia GI pipe, medium grade pipe for watering arrangement and 40 mm bore dia GI pipe, light grade for protection of earth strip, 50mm thick RCC nominal mix (1:2:4) type B-1 cover reinforced with 8mm dia TMT bars @ 15cm C/C both ways and with handle made out of 10mm dia bars, funnel, wire mesh etc. as shown in electrical Plate No. 03 of SSR Part-I connected to earthing test point including taking down old unserviceable material and testing on completion etc complete all as specified and as directed.

S&F 1100V grade heavy duty cable PVC insulated aluminium conductor, 6 sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections incl taking down unsv complete all as specified and as directed.

S&F in repairs flexible copper wire 23/76 wire complete all as per specified and directed.

Supply and fixing PVC Exhaust fan PVC 200 mm sweep single phase 50 Hz AC, air flow rate of 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area including taking down old unsv complete all as specified and directed by Engr-in-Charge. Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store

Supply and fixing PVC Exhaust fan PVC 250 mm sweep single phase 50 Hz AC, air flow rate of 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area including taking down old unsv complete all as specified and directed by Engr-in-Charge. Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store

Supply and fixing PVC Exhaust fan PVC 300 mm sweep heavy duty single phase 50 Hz AC, air flow rate of 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area including taking down old unsv complete all as specified and directed by Engr-in-Charge. Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store

S&F in repairs MCB Distribution board double door type SPN 2 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.

Shri Atoshe Tuccu (BID ID -3297328)

VIHUTO YEPTHO (BID ID -3297355)