SPECIAL REPAIRS TO BUILDING No. 38E (LADIES BATHROOM) AT NCC OTA KAMPTEE UNDER GE KAMPTEE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and debris complete all as specified and directed.

Material and labour for coloured non skid ceramic premium quality tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

Material and labour for glazed ceramic coloured premium quality tiles 300mm x 450mm, on vertical surface such as skirting/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in Cement Mortar 1:3 finished even and fair complete all as specified and as directed.

Taking down existing water proofing treatment including Plain Cement Concrete padding, mortar etc and disposal of rubbish outside of MD land (5 km) and hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for provision of water proofing treatment by using APP torch on non woven polyester film reinforcement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with and including WPC and two coat of aluminum paint of 0.2 Kg/Sqm (each coat) over membrane complete all as specified and directed. Note:- Work to be executed through authorized applicator only.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for reinforced cement concrete 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

Material and labour for providing precast cement concrete Type B1 1:2:4 (using 20mm graded stone aggregate) set in CM 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water roughs, mangers , shelves and similar articles with plain faces, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar complete all as specified and directed.

Supply and fix pre-polished granite 20mm thick fixed on platform/ shelves/ steps/ cills over and including 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as specified and directed

Material and labour for machine cut cudappah stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 ( using 40 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including mass filling in complete all as specified and directed.

Material and labour for providing cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in foundation, mass concrete and filings complete all as specified and directed.

Material and labour for pre-polished chequered tiles rubber pressed glossy finish (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 18.00 here-in-before but half brick wall in CM 1:4 complete all as specified and as directed.

Material and labour for cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.

Supply and fix wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam, chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM 1:3 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.

Material and labour for rendering 15 mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed. Note: WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement ) complete all as specified and directed.

Material and labour for rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even and smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note : Rate for form work incl in the rate quoted by the contractor.

Material and labour for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of chalk whitning complete all as specified and directed

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed

Material and labour for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame) area n. exc 1.50 sqm complete all as specified and directed.

Supply and fix colour powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fix 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.50 square metre in each pane complete all as specified and as directed.

Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply and fix solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, in opening complete as per specified and as directed.

Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fix 100 mm long stainless steel butt hinges and fixed with screw/welded to frames etc complete all as specified and as directed. Note: Sample and design as approved by GE.

Supply and fixing 150mm stainless steel barrel tower bolts, fixed complete all as specified and as directed. Note: Sample and design as approved by GE.

Supply and fixing 125 mm stainless steel pressed handles, fixed complete all as specified and as directed. Note: Sample and design as approved by GE.

Supply and fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in cement mortar 1:3 complete all as specified and as directed.

Supply and fix in repair GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and as directed.

Supply and fix in repair GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and as directed.

Supply & fixed in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminium hinging device, complete all as specified and directed

Supply and fix in repairs 10 litre capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified. Make : Prayag Cat No 501 or techno commercially equivalent in Jaquar/Hindware

Supply and fix in repair Wash Basin oval type (56x41cm) complete all as specified and directed

Supply and fix in repair bib tap 15 mm dia cast copper alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrule and fixed complete all as specified.

Supply and fix in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, fancy type screwed for iron pipe and fixed, complete all as specified and as directed.

Supply and fix in repair chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe complete all as specified and as directed.

Supply and fix in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head, complete all as specified and directed. Make:- Jaquar cat part No FUS-29281 or techno commercially equivalent.

Supply and fix in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete all as specified and directed.

Supply and fix in repairs stop valve/angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and directed.

Supply and fix in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Supply and fix in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fix waste fitting, 32 mm/40mm brass, chromium plated for sink, basin, etc with long screwed shank and fly nut compete all as specified and directed.

Supply and fix in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

Material and labour for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and directed.

Supply and fix in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

Supply and fix in repair chromium plated grating doom with/without waste hole of size 110/125mm dia complete all as specified and directed complete all as specified and directed.

Supply and fix in repair 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

Dismantling water tank of capacity exc 500 litres & not exceeding 1000 ltrs and removing to store of any description complete all as specified and directed

Supply and fix 1000 litre capacity rotational moulded three layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

Material and labour gun-metal, globe or gate valves, 15mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

Material and labour gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

Supply and fix in repairs soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fix in repair corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make: Prayag cat No BEA-44 or techno commercially equivalent in specified makes.

Supply and fix in repair for health faucet of 15 mm bore brass chromium plated including PVC pipe to connection GI tubing 15 mm bore complete all as specified and directed. Make: Prayag cat No BEA - 40 or techno commercially equivalent in specified makes

Supply and fixing PVC cowl slotted vent cowl 110 mm size complete all as specified and as directed.

Material and labour moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

INTERNAL ELECTRIFICATION

Taking down copper/aluminium point wiring (light, fan, socket or power & bell) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including wooden battens /casing /capping and conduit etc and making good disturbed surfaces of walls, floors, ceilings etc. complete all as specified and directed.

Taking down sheet metal enclosure, DB & MCBs main switch etc and making good distrubed sufaces to match with exisiting surfaces, complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces.

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multi stranded copper conductor 2x1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size including dummy switches wherever required complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch complete all as specified and as directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item Sl No 74.00 here -in- before but one ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed.

Material and labour for for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 25 mm medium grade concealed in wall of the following size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed. Make : Wire:- Finolex, Polycab, Havells, KEI . PVC Conduit :- Superplast, Polycab, Panasonic Anchor, Modi, Precision, Astral. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

Supply and fix modular switch one way 6A, 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make : Legrand, Havells, Crabtree, Indoasian or all as per specified in makes

Supply and fix ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed.

Supply and fix 20 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 800 lumen prewired complete all as specified and directed.

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as specified and directed.

Supply and fix light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and directed.

Supply and fixing sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

Supply and fix MCB single pole and neutral 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series, complete all as specified and as directed. Make : Legrand/Havells/ABB or all as per specified in makes

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series ccomplete all as specified and as directed Make : Legrand/Havells/ABB or all as per specified in makes

Note : The amount against Schedule of Credit on Page No.43 shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

DEESHA CONSTRUCTIONS

M/s Rahul Traders

DE PRETTY AND CO