PROVISION OF WORK STATION AND CONNECTED WORK FOR VARIOUS OFFICES IN ADMIN BUILDING AND PROVISION OF FOUR HIGH MAST LIGHTS AT OTM ACCOMMODATION AND DHQ 3 UNDER AGE I MANGALORE

SUPPLY & FIXING OF 50MM PARTITION BASE SYSTEMS L-TYPE WORK STATION Partition: Height - 1200mm frame with top and sides in MS trims and junctions with diecast caps. Table Top: 25mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, with 2mm PVC edge lipping on all exposed edges. Support: 25 mm thick prelaminated gable ends. Wire management : 65mm Grommet cap on table & One metal raceway tile to mount switches below table top level for power and skirting tile for data. Tile Finishes : Above table top Level: Fabric Magnetic Tiles, one glass marker tile & one magnetic tile per workstation. Below table Top level: Pre-Laminated tiles and metal skirting tile on Main spine towards user both side end partition to be considered.

Size 1500/1500x600x1200mm

Size 1500/1200x600x1200mm

Size 1200/1200x600x1200mm

SUPPLY & FIXING OF MOBILE PEDESTAL SIZE:400X450X600HT Top & Sides : 18mm Thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination. Back : 9mm Thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination. Edge : All exposed areas shall be covered with 2mm thick PVC edge lipping. Handle : Finger groove handle. Lock : Regular lock.

Supply & Fixing of Featherlite Amaze Project with Lumbar Support Supply and instalation of mesh upholstered Medium back chair with Self Calibrating tilt multi lock mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support. The main feature is the self weight capability which means that the mechanism automatically adjusts the resistance that the back offers depending upon the weight of the person sitting on the chair.Cushion with pre moulded foam of 50 - 60 density in the shape of plywood with locking system in multiple position, Pneumatic height adustment Class 4 tested -ANSI BIFMA performance standards with stroke in the range of 100~125mm, wide adjustable lumbar support for back, 2 way adjustable arms with steel inserts and PU armrests, and five pronged GF nylon base finished 640mm twin nylon hard casters as per manufacturers specifications and catalogue.The production facility should be TUV certified for ISO and BIFMA PLATINUM certified and All test certificates to be provided, Seat are duly upholstered with FR rated fabric 100% polyester- 340-350 GSM of approved shade.The product shall be Greeguard Gold certified.

M&L 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws or bolts & Nuts to wall as in cabinet or file racks etc. complete all as specified and directed.

S&F chromium plated Auto hinge fixed in door of wooden cabinet or file racks etc. complete all as specified and directed.

S&F chromium plated drawer lock fixed in door of wooden cabinet or file racks etc. complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised of size 75 mm fixed in door of wooden cabinet or file rack etc. complete all as specified and directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including cover plate and metal flush box as suitable module and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls and including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor for one light point controlled by one, one way switchcomplete all as specified and directed.

All as per item No 8 here-in-before but one 3 pin socket outlet point controlled by one 06Amps switch on independent board.

All as per item No 8 here-in-before but one 3 pin socket outlet point controlled by one 06Amps switch on same board.

M&L for Point wiring complete with 2.5 sqmm single core PVC insulted FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including cover plate and metal flush box as suitable module and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls and including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor for one 3 pin socket outlet point controlled by one 16Amp switch on independent board complete all as specified and directed.

S & F Switch Modular 6A single pole, one way, 1 module complete all as specified and directed.

S & F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Switch Modular 16A one way, 1 module complete all as specified and directed.

S & F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls complete all as specified and as directed.

Supply & fixing LED luminaire 600mm x 600mm, 40 Volt, 230 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fix sheet metal enclosure SPN 4 way double door 200 Amps rated busbar, 415 volts fixed on wall and connecting with all as directed

M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

M&L for MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

M & L for cutting of existing tile/ cement/ concrete in floor or wall of size not less than 50mm for laying of electrical wire in PVC conduit and making good to the disturbed surfaces by providing PCC or same material after laying of electrical wire complete all as specified & as directed

Supply and fixing High galvanised mast light 15 mtr height suitable for 6 to 9 lantern symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6mm dia 97/19 guage and double drum winch with luminaire mounting arm, pulley assembly, aviation obstruction light, lightning arrester spike including RCC foundation as per height complete all as specified and directed.

Supply and fixing LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP-66 protection, with impact and corrosion resistant complete with driver and lamp. The fitting should be antiglare type.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion etc all as specified.

M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthling etc. as 32 x 6mm galvanised iron or steel wire complete all as specified.

S&F PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core.

Excavation in trenches not exceeding 1.5m wide and n.exc 1.5m deep and getting out in soft and disintegrated rock for laying of cable complete all as specified and directed by Engineer-in-charge.

Excavation in trenches beyond 1.5m but not exceeding 3 metre deep and getting out in soft and disintegrated rock for pole foundation complete all as specified and directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed by Engr-in-Charge.

Removing surplus soil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point, complete, all as specified and directed by Engr-in-Charge.

Sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed by Engr-in-Charge. Note :- For payment purpose punned thickness shall be measured.

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230 mm x 115 mm x 75 mm complete all as specified and as directed

M&L for Cutting/ Digging / boring under existing road / cement concret/ butuminous road of size not less than 50 mm for laying of cable in GI Pipe & makng good to the disturbed surfaces by providing PCC or same material after laying of cable and returning filling of soil complete all as specified and as directed.

Supply and lay GI pipe medium grade 40 mm dia as cable protection laid on trench/floor, fixed on pole/wall etc all as specified