Smart office in the campus of Regional Transport Office at Vellore

Supplying and filling of conveyed gravel by lorry in basement filling including stacking for premeasurement, conveyance loading and unloading charges and all other incidential charges and including filling laying watering and consolidating etc., complete as directed by the departmental Officers and complying with standard specifications.

Supplying and filling of conveyed gravel by lorry in basement filling including stacking for premeasurement, conveyance loading and unloading charges and all other incidential charges and including filling laying watering and consolidating etc., complete as directed by the departmental Officers and complying with standard specifications.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specifications and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken granite stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specifications and as directed by the departmental officers.

Brick work in Cement Mortar 1:6 (One Cement and Six M-Sand) using best quality Burnt Clay Brick of size 9" x 4 3/8" x 2 3/4" with class designation of 7.50 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc., complete complying with standard specifications and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. Other type of bond shall be done as directed by the Executive Engineer in charge.

For Foundation and Basement

For Superstructure in Ground floor

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.50cm x 5cm as support runner, vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifications. (Payment for centering shall be given after the concrete is laid).

Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m (expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c, etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.000 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.300 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.790 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,

Supplying, fabricating and placing in position of M.S. or R.T.S. reinforcements grill for RCC works as per the design given including cost of steel and black binding wire etc., complete complying with standard specifications. (The contractor will have to make his own arrangements for the supply of MS plain rod / RTS rod and black binding wire)

For Foundation and basement

For Superstructure in Ground floor

Supplying, fabricating and placing in position of M.S. or R.T.S. reinforcements grill for RCC works as per the design given including cost of steel and black binding wire etc., complete complying with standard specifications. (The contractor will have to make his own arrangements for the supply of MS plain rod / RTS rod and black binding wire)

For Foundation and basement

For Superstructure in Ground floor

Supplying and fixing the MS-Channel /MS Angle /MS square or rectangular hollow section of various sizes for Rafters, purlins, clits, shed posts etc., Including labour charges for petty iron work for fixing with one coat of red oxide primer etc., complete.

Supplying and fixing of Mild Steel grills for windows, ventilators etc., complete complying with standard specifications and as directed by the departmental officers

Supplying, fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specifications and as directed by the departmental officers.

Paving the floor with best quality Double Charged Vitrified Tiles of Size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M-sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specifications. (The make and brand of the tiles like Johnson/Kajaria/Somany/Nitco/RAK which has to be got approved by the Executive Engineer before use on works)

Plastering with Cement Mortar 1:5 (One cement and Five P-sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specifications and as directed by the departmental officers.

Supplying Fabricating, erecting and fixing Hilux (or) equivalent Gyp Board FALSE CELING upto a ceiling height of 4.50 m from floor level using Hilux board Plain sheet 10mm thick which includes shaped GI channels of size 25 x 25 x 0.50 mm thick suspended from ceilling at 1.2 m both longitudinal and cross vertical support and fixing shaped GI channels of size 50 x 30 x 0.50 mm and 150 x 10 x 0.50 mm thick at 0.60m centre longitudinal and cross difrection for vertical supports and fixing U shaped GI channels of size 50 x 30 x 0.50 mm thick and 50 x 10 x 0.50 mm thick at 0.60 m centre to centre in cross direction and respectively for horizantal supports of zig - zag pattern and fixing of Gyp board in the panel provided in the design pattern given and sprating the standard specifications and as directed by the departmental officers. The rate shall be inclusive of finishing the edges and wall junctions with suitable lipping and cornice arrangements.

Providing and fixing in position solid full height partition in frame work including door of size (1.00 m x 2.10 m) using aluminium box section of size 62.00 x 38.00 x 2.00 mm at 1.174 Kg/m for vertical and Horizontal Section 0.90m centre to centre fixed with either side 20mm thick novopan water proof ply wood all exposed surfaces to be finished in 0.80 mm thick melamine polish of matching laminate colour as directed including all necessary stainless steel finish fittings like hinges, aldrops, towerbolts and lock etc. including cost of all materials, labour for power consumption charges, transportation charges with all corner edges finished with bull nosing and including labour charges for fixing etc., complete complying with standard specification and as directed by the departmental officer during execution. The sample Material are to be used approveved by the Executive Engineer

Supplying and fixing of UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125 GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing the UPVC fly proof mesh shutter this mosquito net will look as same as like the window door, where the wooden door of the window will be opened outside form the wooden frame and our product will be opened inside. It is made up of first quality channel bars, which has been powder-coated. The fibre 'L' like corners will be used for joining the channel bars in all four side corners. After bar has been made, the mesh will be cut as per the size and ribbed on all the four sides of the frame with a rubber spine, which will hold the mesh hardly. The unbreakable fibre hinges will be used for fixing the bar net on the window frame and the stoppers be used to lock the frame alround the corners according to the necessity. Get quality insect meshes from royal fabrics on best prices. In this material, the fibre-glass or the SS can be placed according to the customers requirement. The channel bars which we use are very strong and durable when comparing to the other dealers all over the city. It is also free from fire and easy washable since the frame has beeen attached and detached easily from the wooden bars. Incase of aluminium/UPVC Windows.

Supplying and fixing the cubical table with cupboard arrangements of 1.50m x 1.25m height side supported stem 2 nos. at middle support 1.50m x 0.75m height 1 No. and top table with 1.50m x 0.80m breadh 1 No. using aluminium box section of size 62.00 x 38.00 x 2.00 mm at 1.174 kg/m for vertical section top, bottom and middle 0.60m centre to centre fixed with either side best quality and approved variety of 25 mm thick Novopan ply wood on either side 0.80 mm thick first quality approved variety of Mica sheets and all corner edges finished with neatly bull nosing finished and side seating with drawer arrangements of size 0.75 x 0.45 m at both side using 20 mm thick novapan ply wood and either side finished with 0.80 mm thick first quality approved variety of Mica sheet finished and top elevated glass of 10 mm thick best quality and approved vareity of ISI mark at middle portion Including cost of all materials, labour for power consumption charges, Transportation charges with all corner edges finished with bull nosing. and including labour charges for fixing etc., complete complying with standard specification and as directed by the departmental officers during execution, the sample material are to be used approved by the Executive Engineer's before use on works

Manufacturing and supplying of Country wood planks with melamine mica table of size: 4'0" x 2'0" x 2'.6" one side with a cupboard and with three drawers and on the other side. The top made out of 18 mm commercial plywood pasted with 1 mm thick laminated sheet with C.W. lipping. C.W. foot rest will be fixed. Drawers made out of C.W. Scantligs. All wooden portion with polish finish etc. Complete

Supplying of Hiback Cushion Visitor Chair of ISI mark Company branded Including cost of all taxes and supply of direct to site of work with all accessories etc., complete as directed by the Departmental officers (The Supply of chairs should be got approved by the Executive Engineer before supply

Supplying and erecting in position of 3 Seater Steel Chairs Rust and Water Proof. Stainless Steel seat, handles and legs, Steel Beam.325-350 kg Weight capacity Durable Parts and Supports, Whole Welded Connections etc. 52 cm Seat Bent Line: 90cm, Arm Length: 37cm, Width: 31cm, High: 4cm, Leg Length: 54cm, high: 22cm without SS base Height. BEAM: 1.7mm Thickness with Durable Screw Tube; Total Out to Out Width: 180cms Height: 80cm Depth: 64cms Weight: 26-27 Kgs Including cost of all taxes and supply of direct to site of work with all accessories etc., complete as directed by the Departmental officers (The Supply of chairs should be got approved by the Executive Engineer before supply)

Supplying and fixing the best quality and approved variety ISI mark vertical blinds premium including labour charges for fixing etc., complete as directed by the departmental officers.

Providing and fixing PVC Acrylic sign board using best quality ISI mark PVC acrylic board of 4mm thick and including PVC sticker cutting and posting (Imported Sheet) including cost of all materials, labour charges etc..complete complying with standard specification and as directed by the departmental officers during execution of work.

Supplying and erecting in position of 50 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid -1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase 1 No. (c) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) 1 No. and Membrane Pressure. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per 18:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specifications and as directed by the Departmental Officers. Make: EXCELLENT SAFETY FIRST /EQUIVALENT

Supplying and installation of dry chemical powder(DCP) type 5kg capacity fire extinguiser complete with CO2 Gas catridge spray nozzle with nose, Gun metal cap. safety clip, wall mounting bracket etc., as per 2171 with ISI mark as directed by the depatrmental officers

Painting two coats of old plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt and including necessary plaster of paris putty, wherever required etc., complete complying with standard specifications.

Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt and including necessary plaster of paris putty, wherever required etc., complete complying with standard specifications and as directed by the departmental officers.

Painting Old wood work with Two coats of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specifications and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Please Enable Macros to View BoQ information