PROVN OF STORAGE SHED FOR EINGINEER OFFICERS MESS UNDER GE (P) EAST DELHI CANTT

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out,returning,filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed..

Excavation in Trenches n exc 1.5 m wide and n exc 1.5 m depth in hard and dense soil for foundation etc ar for shaft,wells,manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m depth and getting out complete all as specified and directed.

Returning filling in including spreading levelling and well ramming in layers not exc 25 cm in hard soil complete all as specified and directed.

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above staring point complete all as specified and directed.

M&L spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soils complete all as specified and as directed

M & L PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in mass concrete, foundation filling etc complete all as specified and directed.

M & L RCC M-25 Grade mix type B1 (using 20mm graded stone aggregate) as in lintels, chajjas etc incl formwork complete all as specified and directed.

M & L RCC M-25 grade mix (using 20mm graded stone aggregate) as in raft footing ,foundation, plinth beam, bases of columun etc complete all as specified and directed.

M&L RCC M-25 grade mix using 20mm graded aggregate as in slabs supported on walls, beams , in floors slab, roofs slab, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified

M&L RCC M-25 grade mix using 20mm graded aggregate as in columns, pillars, piers, posts , struts and the like complete all as specified

M&L for use and waste for form work for rough finished surface of concrete to sides & soffits of foundation, plinth beam, bases of columun etc complete all as specified and directed

M&L for use and waste for form work for fair finished surface of concrete to sides & soffits of slabs supported on walls, beams , in floors slab, roofs slab, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L for use and waste for form work for fair finished surface of concrete to sides of in columns, pillars, piers, posts , struts and the like complete all as specified and directed

M&L Mild steel TMT bars 10mm dia and over, cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed

Ditto all as per item no 14, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders ditto

M &L Mild Steel work in Tubular trusses, purlins , bracings ,columns etc including special shaped washer , nut bolt , base plate etc. using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St. 240 including ,drilling, cutting , rivetting , welding ,providing and fixing angle cleats ,fish plates, gusset plates etc and painting with one shop coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabrication and two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Pre Painted glavalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. (Note: The length of self tapping screw may vary for wooden and steel truss. Contractor to quote rate accordingly) complete all as specified and directed..

M&L Pre Painted glavalume aluminium zinc coating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges, roof covering/cladding to wall, ridge , gutters etc fixed with self tapping screws . (Note: The length of self tapping screw may vary for wooden and steel truss. Contractor to quote rate accordingly) complete all as specified and directed..

M&L Brick work with Subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed..

M&L Brickwork with Subclass 'B' bricks as in half brick wall, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed..

M&L int plaster 15 mm thick cement plaster in CM 1:6 on fair / unfair surfaces of brickwork or concrete surfaces wall finished even & smooth without using extra cement complete all as specified and directed.

M&L Ext plaster 15 mm thick cement plaster in CM 1:4 for fair / unfair surfaces of brickwork or concrete surfaces wall finished even & fair without using extra cement complete all as specified and directed.

M&L preparation of new plastered walls,pillasters, cornices surface etc & applying two coat of exterior emulsion paint (Apex or equivalent) over a coat of white cement base putty complete all as specified and as directed.

M&L preparation of new plastered walls,pillasters, cornices surface etc & applying two coats of distemper over a coat white cement base putty all as specified and as directed.

S&F 60 mm thick 40kg/m3 density PUF insulated panels sandwiched between two sheets of 0.5 mm thick pre-painted galvanised iron sheet cladding on both sides having internal finish with ivory colour and external finish of colour as approved by GE and toung and groove joints at both vertical side panels having locking arrangement with check nuts for joining of panels of each other also heat transmission coefficient all as per IS 661-2000 and IS 3972. Panels will be provided with additionally reinforecements in form of suitable MS hollow section vertically and horizontally at suitable intervals on over complete all as specified and directed by Eng-in-charge. Make: Cactus Profile Pvt Ltd/Nakron Infra Pvt Ltd /Industrial foams Pvt Ltd / Supersun Prefab Pvt Ltd/ Metal space Buildcon Pvt Ltd / Green Metal Infra Pvt Ltd/ unifix/ Prestar .

M & L PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in flooring with 75 mm thickness complete all as specified and directed.

M&L for Hard Core broken to gauge n exc 63 mm all as specified complete all as specified and directed..

M & L 40 mm thick PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in floor finish even and smooth with using extra cement complete all as specified and directed..

M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing complete all as specified

Ditto all as per item No 30 but as in 100mm high skirting over 10mm rendering in cm 1:3

M & L 75 mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in Plinth Protection even and smooth without using extra cement complete all as specified and directed..

S&F Anodised aluminium frame for doors,windows,ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Anodised aluminium doors shutters, aluminium section weighing 0.55 kg/m incl necessary joining cleats,glazing clips,rubber neoprene packing, handles 2 Nos. in each door,Alu tower bolt, floor spring , lock , anodised aluminium snap beading screws etc.incl ACP sheet insert in lower half portion complete all as specified. (Note :-supply only sheet glass shall be measured & paid separetly )

S&F anodised aluminium window and ventilators with sliding / fixed type shutters, without sash bar, aluminium section weighing 0.55 kg/m inc necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles , lock etc. complete all as specified.(Note :-supply only sheet glass shall be measured & paid separetly )

S&F framed work such as grills,gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars,barred iron bars,ladders,framed balusters,walk ways,railings,framework of water of water tanks and similar work conforming to Fe 290 grade-E-165 complete all as specified and directed..

Supply only Sheet glass 5.5 mm thick,ordinary quality and glazing putty in square exc 0.5 Sqm in each pane complete all as specified and directed. (Note :- sheet glass shall be fixed in alum door, window)

M&L for Glass dividing strips, 3 mm thick (Floors) complete as specified.

Supply and fixing for point wiring with 1.5 sqmm, single core, PVC insulated but unsheathed, FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with similar 1.5 sqmm cable (inc connecting to earth dolly) drawn through and incl rigid PVC conduit 20 mm dia and conduit accessories/fittings, fixed/laid/concealed in walls/ceilings and also incl sunk type modular pressed steel terminal box of thickness not less than 2 mm and modular top cover with back plate suitable for modular switch/sockets/fan regulator complete all as specified and directed for One light/fan/Exhaust point controlled by one way switch

Ditto all as per item no 39 above but for one 3 pin socket outlet, 5 amps, independent

Ditto all as per item no 39 above but for one 3 pin socket outlet, 5 amps on the same board with other switches.

Ditto all as per item no 39 above but for wiring with cables 2.5 sqmm size and 2.5 sqmm as earth wire for power point

S&F of modular type 5 Amps 1 way switch, single module complete all as specified and directed.

S&F of modular type 15 Amps 1 way switch & socket combination, single module complete all as specified and directed.

S&F of ceiling rose, three terminal 230/250 Volts grade complete all as specified and directed.

MCB DB SPN 8 way double door, IP-42, IK-09 with metal door rated bus bar complete.

S&F on wall / ceiling of surface type 18/20 watts LED Tube light fitting fabricated out of CRCA sheet powder coated with standerd fitting/accessories (as applicable) with lamp and driver circuit complete.

Supply and hanging/fixing ceiling fans (1200 mm sweep) BEE 5 star rated including complete all as specified.

S&F MCB SP 6 to 32 Amps C curve 10KA complete all as specified and directed.

S&F MCB SPN 40 to 63 Amps C curve 10KA complete all as specified and directed.

M&L for concealed sub-main wiring alongwith earth wire of size of 2x6 sq mm + 1 x 6.0 sq mm, earth wire, ISI marked FRLS, PVC insulated multi stranded, copper conductor, single core cable drawn through and incl PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinking for sunken boxed & making good to walls, floors etc complete all as specified and as directed.

ASHUTOSH BUILDERS

BEHAL TRADERS

M/S CHANDER MUNI

Raunak constuction AND Developers

MRITUNJYA ASSOCIATES